ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
21 May 2009, 10:49 AM | #1 |
"TRF" Member
Join Date: May 2009
Location: Wiltshire
Posts: 5
|
Condensation in Rolex
I was wondering if anyone here has any advice or experience with condensation in the screen of their Rolex.
It's my father's watch, about 7 years old and the dial says Rolex Oyster Precision but I don't know if that is the model or any more than that at the moment. We had a problem with the pin a couple of years ago and it was replaced but apart from that it's worked perfectly until now. The watch has not been immersed in water or used in the shower and has been in the airing cupboard for 2 days with the dial pin in the 'out' position which has not made any difference to the water droplets on the inner glass so far. Do you have any reccommendations as to things we can do at home, to be honest it could do with a bit of a clean, but anything else? Also, possible reasons it may have done this? And could this lead to damage/rust, or are the inner workings stainless steel? I have little knowledge of anything watch related so all help appreciated! I realise it will probably have to go for a service, but I'd at least like to have a bit more info for when I talk to my father about this. All help, replies and info much appreciated. Thank you. |
21 May 2009, 11:12 AM | #2 | |
"TRF" Member
Join Date: Apr 2009
Real Name: Mikey Uí Néill
Location: Olden Texas
Watch: 14060M & 16570
Posts: 1,941
|
Quote:
|
|
21 May 2009, 11:13 AM | #3 |
"TRF" Member
Join Date: Nov 2008
Location: Texas
Posts: 2,002
|
You need to take this to be serviced ASAP - the longer the water is in it the more damage it can do. Moisture can destroy the movement. In this case (no pun intended!), time is money.
|
21 May 2009, 11:17 AM | #4 |
"TRF" Member
Join Date: May 2009
Location: Wiltshire
Posts: 5
|
Thanks for the reply, can water in the Rolex lead to rust in the workings of the watch?
I thought a few days in the airing cupboard would at least help dry it out, but no change. How annoying! |
21 May 2009, 11:18 AM | #5 |
"TRF" Member
Join Date: Mar 2006
Real Name: Frank
Location: Chattanooga, TN
Watch: SS Submariner Date
Posts: 4,042
|
It can cause all sorts of issues. You need to get that taken care of ASAP.
__________________
RTFT - Read The Friggin' Thread FcB |
21 May 2009, 11:21 AM | #6 |
2024 Pledge Member
Join Date: Sep 2008
Real Name: Richard
Location: USA
Watch: YM Deep Space
Posts: 12,501
|
Get it serviced asap!!!
__________________
Rolex Yacht-Master 40mm (SS-YG / Deep Space MOP) 16623 Breitling Aerospace Titanium / 18K with UTC. Omega Speedmaster 3510.50 Oris TT1 Pro Diver Regulator 43MM |
21 May 2009, 11:50 AM | #7 |
"TRF" Member
Join Date: May 2009
Location: Wiltshire
Posts: 5
|
I will make sure it goes for a service when I can next pick it up from my Father and take it to the shop in town which will be in a few days.
Any suggestions for the time being other than the airing cupboard for drying it out without damaging it? Thanks for the briliant replies, and such prompt replies - I'm really grateful. |
21 May 2009, 11:52 AM | #8 |
Banned
Join Date: Feb 2008
Location: California
Watch: GMTIIcSUBUBFDSDDS
Posts: 334
|
See if you can find any of the little silica gel packets that come in new shoes... Put several of those (or as many as you can find) in a sealed ziplock bag or piece of sealed kitchen wear UNTIL you can get it to a service center.
The longer you wait, the larger the repair bill! |
21 May 2009, 12:02 PM | #9 | |
"TRF" Member
Join Date: May 2009
Location: Wiltshire
Posts: 5
|
Quote:
|
|
21 May 2009, 12:35 PM | #10 |
Member
Join Date: Nov 2008
Real Name: Adam
Location: Chicago
Posts: 104
|
|
21 May 2009, 12:42 PM | #11 |
"TRF" Member
Join Date: Dec 2007
Real Name: David
Location: USA
Watch: your step!
Posts: 7,882
|
You can also stick it in the freezer until you get it to a jeweler or service center.
__________________
Rolex. The Rolex of watches. 16570 Expy2 Noir, 116710 GMT Master II, 2552.80 SMP |
21 May 2009, 12:54 PM | #12 |
"TRF" Member
Join Date: Mar 2009
Real Name: Dennis
Location: L.I./N.Y.
Watch: SUBMARINER 14060M
Posts: 2,769
|
|
21 May 2009, 12:56 PM | #13 |
"TRF" Member
Join Date: Mar 2006
Real Name: Frank
Location: Chattanooga, TN
Watch: SS Submariner Date
Posts: 4,042
|
yep. Bad idea! Can cause additional issues with regards to the oils inside as well.
__________________
RTFT - Read The Friggin' Thread FcB |
21 May 2009, 12:58 PM | #14 |
Banned
Join Date: Feb 2008
Location: California
Watch: GMTIIcSUBUBFDSDDS
Posts: 334
|
|
22 May 2009, 10:20 AM | #15 |
"TRF" Member
Join Date: May 2009
Location: Wiltshire
Posts: 5
|
Thank you for all the helpful replies, it is very much appreciated.
I managed to get the watch to the Jeweller today and they said if caught in time it should be back within a few days which is just brilliant. Fingers crossed no serious damage. Thanks again, you have all been helpful and friendly. I will update and let you know what the problem was when I pick it up. |
22 May 2009, 10:26 AM | #16 |
"TRF" Member
Join Date: Mar 2006
Real Name: Frank
Location: Chattanooga, TN
Watch: SS Submariner Date
Posts: 4,042
|
That's great news. Looking forward to hearing back what the watchmaker has to say.
__________________
RTFT - Read The Friggin' Thread FcB |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.