ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
21 July 2015, 05:53 PM | #1 |
"TRF" Member
Join Date: Aug 2012
Real Name: read backwards
Location: Philippines
Watch: what i'm wearing
Posts: 331
|
Day-Date Dial Question
Hi, everyone!
I just got this beautiful spanish red quarter dial Day-Date. 3 of its tritium plots are (6, 8 and 9 position). However at closer inspection, two of the plots are apparently dangling around inside the crystal dome. What should I do then? 1. Should I leave it as is? 2. Should I have my watchmaker glue back the two loose plots and let one position without a plot? 3. Have the two loose plots glued back and then relume the last missing one? 4. Have all plots relumed? Any and all comments would be much appreciated. Thank you. Here's a picture of the watch: - |
21 July 2015, 10:59 PM | #2 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Feb 2013
Real Name: Rob
Location: Parrish fl.
Watch: Tt datejust 16233
Posts: 20,947
|
Not sure what you mean about dangling, but if they are actually just sliding around inside, I would definitely hack it, and take it to my watchmaker. I would worry about one of the plots getting wedged in the day, or date window, and causing more problems!! JMO!
__________________
Rolex Omega Tag Heuer |
21 July 2015, 11:32 PM | #3 |
Banned
Join Date: Dec 2012
Real Name: Greg
Location: michigan
Watch: Rolex Oyster
Posts: 4,046
|
they have a bit of patina to them too I'd probably just get them all ripped off and the plot points wiped clean so it's lumeless or relumed so it all matches. or if you just got it, return it.
|
21 July 2015, 11:40 PM | #4 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 40,725
|
Day-Date Dial Question
I can see one of them in the second pic. It's lodged between crystal and rehaut right at the edge just below the crown.
Since tritium won't be replaceable - and the vintage dial is a T SWISS T one, you have to think about restoring with luminova. If your watchmaker has this skills then it is safer than letting the loose plots float around. Of course you also have option of removing them all and simply have a clean original dial without plots. But it is best to have the situation fixed before trouble can happen. Sent from my iPhone using Tapatalk
__________________
Does anyone really know what time it is? |
22 July 2015, 12:21 AM | #5 |
"TRF" Member
Join Date: Feb 2014
Location: Central Texas
Posts: 1,973
|
If they can be cleanly removed...and leave no trace that might be a great option..and then source non lume hands. :-)
All of the dials said t swiss t anyway...even the non lume ones I'm fairly sure...so...not a big deal. Rolex Geneve relumed an old perfect dial with luminova in a 1018 I had once ... I didn't ask and neither did they it just came back that way. On a non sport model I don't personally have an issue with that. I like a watch to function.. |
13 August 2015, 03:11 PM | #6 |
"TRF" Member
Join Date: Aug 2012
Real Name: read backwards
Location: Philippines
Watch: what i'm wearing
Posts: 331
|
Seems like removing all the plots is a viable option. Thanks all for the suggestions!
|
13 August 2015, 03:17 PM | #7 |
Banned
Join Date: Aug 2010
Location: Newport Beach, CA
Posts: 8,391
|
If it bothers you, I would personally either have all the lume plots carefully cleaned and removed, or have the dial professionally relumed.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.