The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 3 January 2011, 12:28 PM   #1
cedargrove
"TRF" Member
 
cedargrove's Avatar
 
Join Date: Dec 2010
Real Name: Rich
Location: Canada
Watch: Milgauss, GMT IIc
Posts: 3,012
Bracelet screw comes out on new Rolex

I bought a Milgauss a week ago from my local AD, and one screw on the bracelet keeps coming out a little bit. Specifically it is the screw on the link actually attached to the clasp on the 6 side. I have screwed it in myself with a tiny screw driver, yet it still comes out a bit (every couple of days).

Obviously this shouldn't happen and my fear is that the entire watch might fall off my wrist.

How common is this problem?

Is there any easy fix, or should I go to a RSC (there is one a few blocks away from me).

Thanks, Rich
cedargrove is offline   Reply With Quote
Old 3 January 2011, 12:42 PM   #2
MortgageGuy
"TRF" Member
 
MortgageGuy's Avatar
 
Join Date: Jun 2009
Real Name: Adam
Location: Orlando, Florida
Watch: Me
Posts: 9,935
This is a very easy fix... Since it is new, I would go back to either the AD or the RSC just down the road. All they need to do is place a bit of loctite onto the screw thread and put the screw back in, this will do the trick You cal also do this yourself very easilly but since it is new I would just have them do it.

The AD may not have used loctite when they sized the bracelet for you, a mistake in my book but again should not be an issue

Lets see some pics of your new watch
__________________
The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki
MortgageGuy is offline   Reply With Quote
Old 3 January 2011, 12:45 PM   #3
HL65
TRF Moderator & 2024 Patron
 
HL65's Avatar
 
Join Date: Dec 2007
Real Name: Ken
Location: SW Florida
Watch: One on my wrist.
Posts: 63,323
X2! Good advice Adam--congrats on the Packers too!!!
__________________

SPEM SUCCESSUS ALIT
HL65 is offline   Reply With Quote
Old 3 January 2011, 12:48 PM   #4
sea-dweller
"TRF" Member
 
sea-dweller's Avatar
 
Join Date: Oct 2007
Real Name: Dennis
Location: Bay Area - 925
Posts: 40,018
Yep, Loctite works. I had this occur on my new DJ.
__________________
TRF Member #6699 (since September 2007)
sea-dweller is offline   Reply With Quote
Old 3 January 2011, 12:57 PM   #5
cedargrove
"TRF" Member
 
cedargrove's Avatar
 
Join Date: Dec 2010
Real Name: Rich
Location: Canada
Watch: Milgauss, GMT IIc
Posts: 3,012
Thanks Adam. I'll do that.

They didn't need to adjust any links because the watch fit me as it came (I tried on two or three Milgausses and they all fit the same). However this brings up another question, as I wonder what they would have done if my wrists were bigger? Should my watch have come with extra links?

I counted the links - there are seven full links on the 12 side (plus the extender link), and only five full links (plus the half link affixed to the clasp) on the 6 side. I'm not counting the links between the lugs that don't move. Is it normal to have an imbalance?

If they should have given me extra links then I'll have the AD do the loctite and get them to give me some extra links, otherwise I'll go to the RSC.

Thanks again. Rich
cedargrove is offline   Reply With Quote
Old 3 January 2011, 01:10 PM   #6
MortgageGuy
"TRF" Member
 
MortgageGuy's Avatar
 
Join Date: Jun 2009
Real Name: Adam
Location: Orlando, Florida
Watch: Me
Posts: 9,935
Quote:
Originally Posted by cedargrove View Post
Thanks Adam. I'll do that.

They didn't need to adjust any links because the watch fit me as it came (I tried on two or three Milgausses and they all fit the same). However this brings up another question, as I wonder what they would have done if my wrists were bigger? Should my watch have come with extra links?

I counted the links - there are seven full links on the 12 side (plus the extender link), and only five full links (plus the half link affixed to the clasp) on the 6 side. I'm not counting the links between the lugs that don't move. Is it normal to have an imbalance?

If they should have given me extra links then I'll have the AD do the loctite and get them to give me some extra links, otherwise I'll go to the RSC.

Thanks again. Rich
You bet, sounds like your good on the links, yes, there is an "imbalance" if you will. If your wrist were bigger an AD may give you a link or two as part of the sale or worst case sell them to you

I do believe Loctite will fix it but if not, let is know...either AD or RSC Now where are those pics???
__________________
The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki
MortgageGuy is offline   Reply With Quote
Old 3 January 2011, 01:12 PM   #7
MortgageGuy
"TRF" Member
 
MortgageGuy's Avatar
 
Join Date: Jun 2009
Real Name: Adam
Location: Orlando, Florida
Watch: Me
Posts: 9,935
Quote:
Originally Posted by SteelerFan1965 View Post
X2! Good advice Adam--congrats on the Packers too!!!
Thanks and Thanks Connor Do you remember my loctite thread Just dont dip the entire screw/watch in loctite, you ONLY need a drop/two My bracelet was permanently locked Live and learn
__________________
The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki
MortgageGuy is offline   Reply With Quote
Old 3 January 2011, 02:30 PM   #8
cedargrove
"TRF" Member
 
cedargrove's Avatar
 
Join Date: Dec 2010
Real Name: Rich
Location: Canada
Watch: Milgauss, GMT IIc
Posts: 3,012
Thanks again Adam, and all else who answered so quickly. These forums have been extremely helpful. I've learned a lot in only a few days, but so much more to learn.

I haven't taken any pics of my watch yet, but will do so in the next couple of days and then post my pics. I've clued in that posting pics is quite common, and have really enjoyed seeing all the different watches out there. It makes me want to get a second Rolex, but it will take some time to convince the wife (although she encouraged me on the first).
cedargrove is offline   Reply With Quote
Old 3 January 2011, 02:37 PM   #9
Sixxgrand1
Banned
 
Join Date: May 2010
Location: Canada
Watch: EXP I & II
Posts: 825
http://www.rolexforums.com/showthrea...d1#post2221107
Sixxgrand1 is offline   Reply With Quote
Old 3 January 2011, 02:42 PM   #10
TSts
"TRF" Member
 
Join Date: Dec 2009
Location: So-Cal USA
Posts: 1,067
Loctite 242 is what you need.
__________________

116710LN
116300blro
TSts is offline   Reply With Quote
Old 3 January 2011, 03:03 PM   #11
mmmmp
"TRF" Member
 
mmmmp's Avatar
 
Join Date: Dec 2009
Real Name: Mark P
Location: Toronto
Watch: SS Wimbledon DJ41
Posts: 2,046
Rich, similar thing happened to me except all the screws were loose. Now, I'm also in Toronto and I wonder if you bought it at H.T. Jewellers. Mark
mmmmp is offline   Reply With Quote
Old 3 January 2011, 04:05 PM   #12
cedargrove
"TRF" Member
 
cedargrove's Avatar
 
Join Date: Dec 2010
Real Name: Rich
Location: Canada
Watch: Milgauss, GMT IIc
Posts: 3,012
Quote:
Originally Posted by mmmmp View Post
Rich, similar thing happened to me except all the screws were loose. Now, I'm also in Toronto and I wonder if you bought it at H.T. Jewellers. Mark
Hey Mark,

No, I got mine downtown at RDV.

Rich
cedargrove is offline   Reply With Quote
Old 3 January 2011, 05:00 PM   #13
mmmmp
"TRF" Member
 
mmmmp's Avatar
 
Join Date: Dec 2009
Real Name: Mark P
Location: Toronto
Watch: SS Wimbledon DJ41
Posts: 2,046
Oh well, just a coincidence then. Enjoy your beautiful new watch. Best, Mark
mmmmp is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.