ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
11 April 2012, 05:02 AM | #1 |
"TRF" Member
Join Date: Feb 2011
Location: Europe
Watch: Ceramic Sub
Posts: 75
|
Rolex losing time
My rolex is losing 3 seconds a day :( should I take it to be regulated? (It's a one year old ceramic submariner worn 24 hours a day)
|
11 April 2012, 05:08 AM | #2 |
"TRF" Member
Join Date: Jul 2010
Location: ny
Watch: sub-c Date
Posts: 1,289
|
its within the norm if it starts losing more than 5 a day then id bring it in
|
11 April 2012, 05:09 AM | #3 |
"TRF" Member
Join Date: Sep 2011
Location: Canada
Posts: 6,773
|
It`s running within spec. so don`t worry about it unless it loses more than the current amount.
|
11 April 2012, 05:15 AM | #4 |
Member
Join Date: Mar 2012
Location: Madrid
Posts: 34
|
From what I've read and experienced the watch runs a little slower when the power reserve is full, faster when the reserve is low.
Take it off at night and you should find it runs perfectly. Laying it crown down rather than flat will make it gain even more I think. |
11 April 2012, 05:26 AM | #5 |
Member
Join Date: Mar 2012
Location: Madrid
Posts: 34
|
Oops, corrected thanks to a picture borrowed from elsewhere on the internet
|
11 April 2012, 05:40 AM | #6 |
Banned
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
|
3 secs is nothing, enjoy the watch
|
11 April 2012, 05:41 AM | #7 |
"TRF" Member
Join Date: Jan 2012
Real Name: Chris
Location: Wisconsin
Watch: Rolex
Posts: 2,984
|
automatic watches will not be perfect
__________________
Lead by example through production. |
11 April 2012, 05:42 AM | #8 |
"TRF" Member
Join Date: Dec 2009
Real Name: Mark P
Location: Toronto
Watch: SS Wimbledon DJ41
Posts: 2,046
|
As mentioned, it's within spec. My 2010 (NIB) Turn-O-Graph has been +4 from day one. Rather than risk dust, dirt, fingerprints by having the watch regulated I chose to ignore it. I've heard too many tales of minor problems occuring when casebacks are removed during service. Don't get me wrong, this likely would never happen but I firmly believe casebacks should only be opened when it's absolutely essential. (full service, mechanical failure, etc.) However, if it bugs you by all means take it in for regulation-it's your watch after all. Good luck and enjoy your Rolex.
|
11 April 2012, 05:57 AM | #9 |
"TRF" Member
Join Date: Nov 2011
Location: Mississippi
Posts: 255
|
Sure!
I do it all the time on new watches if my watch is running slow....takes just a few minutes and at no charge!
|
11 April 2012, 06:25 AM | #10 |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: Dec 2007
Real Name: Ken
Location: SW Florida
Watch: One on my wrist.
Posts: 63,398
|
That is good news--within COSC specs.
__________________
SPEM SUCCESSUS ALIT |
11 April 2012, 06:45 AM | #11 |
"TRF" Member
Join Date: Jul 2011
Location: Praha
Posts: 52
|
I understand OP being concerned since I myself am also a precission kind of freak. I dont mind +3 secs but Im rather bothered by anything going into minus.. Is it realistic to expect regulating the watch to turn it from -3 into positive numbers?
|
11 April 2012, 06:58 AM | #12 |
"TRF" Member
Join Date: Apr 2011
Location: canada
Watch: me post!
Posts: 3,804
|
like others have said youre within cosc specs so no need for worry.
just curious you never take the watch off your wrist? even when you sleep? how you place the watch, whether it be on the side, face up or face down can sometimes have an effect to gain or lose seconds. |
11 April 2012, 07:28 AM | #13 |
"TRF" Member
Join Date: Jul 2011
Real Name: Gunter
Location: AL/NJ
Watch: DSSD; 116610LN
Posts: 5,509
|
It's fine. That's within specs. It's not a quartz watch. It's not going to keep perfect time. Enjoy it. I've never heard of any mechanical watch that doesn't lose or gain some time over a few days. 3 sec a day is nothing.
|
11 April 2012, 08:08 AM | #14 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
-3 is just fine. Enjoy that piece
__________________
|
11 April 2012, 11:30 AM | #15 |
"TRF" Member
Join Date: Nov 2010
Real Name: Mr. Bill
Location: South Florida
Watch: 16610
Posts: 6,148
|
Relax! It's a mechanical watch. -3 secs/day is still amazing!
__________________
Card Carrying Member of the Global Association of the Retro-Grouch-Curmudgeons - ID # 13 |
11 April 2012, 12:49 PM | #16 |
"TRF" Member
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
|
You really didn't state how you are actually came to this conclusion that it is -3 a day.
So the best way to test is to make sure you first give your watch 40 winds to top off the power reserve and wear the watch anywhere from 8 to 10 hours a day. Although your Rolex is a self wind watch, typically most people will not do enough activity to actually top off the power reserve, so giving the watch a full 40 winds every other week typically is best. The watch will run more efficiently when the power reserve is topped off. Set the watch to an accurate time source and then check the watch after 7 days. Since position, tempature, and other things can account for accuracy, it is best to check after at least 7 days of running the watch and average your result. However if it is -3 seconds a day this is hardly anything to worry about as it is still well within COSC. COSC is after all between -4 and +6. After 30 days your still only 90 seconds off, which is pretty amazing considering this is a mechanical and not a quartz watch.
__________________
When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
11 April 2012, 04:57 PM | #17 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,261
|
Your watch is fine remember there are 86400 seconds in a day and your watch is now showing 99.997% accuracy try resting while of wrist flat dial up over night.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
11 April 2012, 06:36 PM | #18 |
2024 Pledge Member
Join Date: Aug 2009
Real Name: Travis
Location: FL / NYC
Watch: Yes..
Posts: 32,218
|
3 seconds is fine..
I wouldn't do a thing.
|
11 April 2012, 09:28 PM | #19 |
"TRF" Member
Join Date: Feb 2011
Location: Europe
Watch: Ceramic Sub
Posts: 75
|
Ok thanks for all the help guys, I'm gonna star leaving it face up at night instead of on my wrist :)
|
12 April 2012, 08:23 AM | #20 |
"TRF" Member
Join Date: May 2011
Location: NYC
Watch: 5513, 116610
Posts: 49
|
I tested my 5513 sub in various positions last year.
Here are the results: http://www.rolexforums.com/showthread.php?t=177498 This may not work for newer watches. |
24 August 2014, 07:08 AM | #21 |
"TRF" Member
Join Date: Aug 2014
Location: Boca Raton
Watch: GMT Master II
Posts: 277
|
If it loses more than 4 or gains more than 6 seconds then consider taking it in....4/6 is considered normal.
|
24 August 2014, 07:42 AM | #22 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: New Mexico
Watch: 116710 BLNR
Posts: 34,347
|
When my Rolex watches reach +5/-3, if they are under warranty, I have taken them in for a regulation.
My watchmaker never gives me a problem, but he does say that he won't touch them if they are within +4/-2. My BLNR is very close to being +5, but I'm going to give it a full year to balance out before I get it regulated, unless it gets well beyond spec.
__________________
JJ Inaugural TRF $50 Watch Challenge Winner |
24 August 2014, 07:52 AM | #23 |
"TRF" Member
Join Date: May 2007
Location: .
Posts: 17,898
|
How did this 2 year old thread get revived--or more importantly why
|
24 August 2014, 07:55 AM | #24 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: New Mexico
Watch: 116710 BLNR
Posts: 34,347
|
Old threads get revived from time to time and there is usually someone on the board, whether or not they revived it, will find the information useful.
__________________
JJ Inaugural TRF $50 Watch Challenge Winner |
24 August 2014, 05:24 PM | #25 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,261
|
Have agree and its now closed.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
24 August 2014, 08:32 AM | #26 |
"TRF" Member
Join Date: Jul 2014
Real Name: Gabe
Location: Maryland
Watch: OP 39
Posts: 47
|
Excuse my ignorance but how in the world do you know its 3 seconds slow or fast? That seems like such a small difference
|
24 August 2014, 08:37 AM | #27 |
"TRF" Member
Join Date: Sep 2013
Location: UK
Posts: 81
|
You set it so it shows the same time as an atomic clock. 10 days later its 30 seconds fast/slow??
|
24 August 2014, 09:29 AM | #28 |
"TRF" Member
Join Date: Apr 2011
Location: canada
Watch: me post!
Posts: 3,804
|
Sounds like my Rolex. Nothing to worry about. Strap it on and enjoy.
|
24 August 2014, 09:54 AM | #29 |
"TRF" Member
Join Date: May 2008
Location: USA
Watch: 116610 , 16233
Posts: 1,802
|
Wow
Can we say ocd
__________________
|
11 April 2012, 09:07 PM | #30 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,798
|
Peter's 99.997 is closer to '99.996528' than to your 99.9999.
__________________
E |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.