126500LN or 116500LN? I went for…

[rolexboy66]

Originally Posted by goldboy

Gosh my black dial 116500 feels insulted after this post. You did go for the classic smaller case size though, great choice

Haha why insulted? Both series are great looking regardless! There is no intended bashing of any other models!

Yeah it looks and is 1mm smaller than the newer one sigh.. and man I really do love bigger watches.. so imagine how much i preferred the bolder look with more contrast of the older one otherwise I normally would have gone for the bigger.

[Mystro]

Originally Posted by rolexboy66

Haha why insulted? Both series are great looking regardless! There is no intended bashing of any other models!

Yeah it looks and is 1mm smaller than the newer one sigh.. and man I really do love bigger watches.. so imagine how much i preferred the bolder look with more contrast of the older one otherwise I normally would have gone for the bigger.

I don’t think it’s even 1mm smaller is it?? There is a lot of optical illusions going on with the case change.

[Rolex1982]

I had the 116 panda but after selling it I don’t really miss it. But it was a great watch! I would love to own the black 126. That ring around the ceramic and the small subdials make it look so good!

[Mystro]

Originally Posted by Rolex1982

I had the 116 panda but after selling it I don’t really miss it. But it was a great watch! I would love to own the black 126. That ring around the ceramic and the small subdials make it look so good!

That would be a hell of a pair with your GMT meteor.

[881]

You need to please yourself good job

[rolexboy66]

Originally Posted by Mystro

I don’t think it’s even 1mm smaller is it?? There is a lot of optical illusions going on with the case change.

Lugs are 1mm smaller, and the case size, some say is same size, some say is 1mm smaller too.. I’m not sure but comparing both size by size, it’s looks pretty much same to me

[Rolex1982]

Originally Posted by Mystro

That would be a hell of a pair with your GMT meteor.

I agree, just tell my wife that! :p


Verzonden vanaf mijn iPhone met Tapatalk

[fskywalker]

Congrats


Sent from my iPhone using Tapatalk Pro

[Bazil]

Originally Posted by rolexboy66

Lugs are 1mm smaller, and the case size, some say is same size, some say is 1mm smaller too.. I’m not sure but comparing both size by size, it’s looks pretty much same to me

I think sub-dials and bezel stand out to me .. although I went 116 I’m not counting out at some point upgrading to 126 .. side by side I’m not keen on 126, but when tried on wasn’t as noticeable .. plus my eyesight is shocking anyhoo

[fishingbear]

Congratulations on a superb choice.

[Devildog]

Originally Posted by rolesor2022

Agreed! There's this guy named Karleonesub16610 who frequents this sub and has an IG that loves to talk about how much better the 126 white is compared to the 116. It's absolutely fine that he feels that way but for him to constantly put down the 116 white is ridiculous!

Arguably for you to allow his IG posts to trigger you to have to mention his IG posting is ridiculous is, well, ridiculous

Just "unfollow" and move on

[Devildog]

Originally Posted by Mystro

I don’t think it’s even 1mm smaller is it?? There is a lot of optical illusions going on with the case change.

As measured 10 to 4 (or as close as you can get) yes, its 1mm smaller.

More obvious when viewed from behind. The pic is a PM vs steel, but the 12 series steel case is measuring the same as the 11 series PM

Bezel outer diameter is effectively the same

[SS Oyster]

Originally Posted by Rolex1982

I had the 116 panda but after selling it I don’t really miss it. But it was a great watch! I would love to own the black 126. That ring around the ceramic and the small subdials make it look so good!

That “ring” will be the first place you look to judge condition. It’s such a stupid move for Rolex to create a known vulnerability in the 126500 and 12651x models from their vast experience over polishing 116520 and 16520 bezels.

Everyone knows this, right?!?


Sent from my iPhone using Tapatalk

[Greg.A]

Originally Posted by SS Oyster

That “ring” will be the first place you look to judge condition. It’s such a stupid move for Rolex to create a known vulnerability in the 126500 and 12651x models from their vast experience over polishing 116520 and 16520 bezels.

Everyone knows this, right?!?


Sent from my iPhone using Tapatalk

Nah..polishing a rim would be much cheaper than replacing the whole ceramic bezel if there’s a chip/crack upon an impact I suppose. And this design is also a nod to the earlier generation Daytonas. Do also have a look at the current speedmasters , they also have it

[60sec]

Both the 116 and 126 are gorgeous watches, but I prefer the 126 by a small margin in either color. Just a cleaner, more sophisticated look.




Sent from my iPhone using Tapatalk

[Mystro]

Originally Posted by Devildog

As measured 10 to 4 (or as close as you can get) yes, its 1mm smaller.

More obvious when viewed from behind. The pic is a PM vs steel, but the 12 series steel case is measuring the same as the 11 series PM

Bezel outer diameter is effectively the same

Wow, there is something that I have not noticed with the case back. It appears the 12 series Daytona has a more domed case back???? That was one of the huge factors why the 11 series Daytona is so comfortable with its large flat case back that spreads its weight over a larger surface area on your wrist.

[Greg.A]

Originally Posted by 60sec

Both the 116 and 126 are gorgeous watches, but I prefer the 126 by a small margin in either color. Just a cleaner, more sophisticated look.




Sent from my iPhone using Tapatalk

Nice..the zenith rings on the new 126500ln is such a stunner..

[karleone]

Originally Posted by Mystro

Wow, there is something that I have not noticed with the case back. It appears the 12 series Daytona has a more domed case back???? That was one of the huge factors why the 11 series Daytona is so comfortable with its large flat case back that spreads its weight over a larger surface area on your wrist.

I know you love your white 116500 and I love my black dial too. I have the white 126500 as well and I can tell you the new ref sits better on my wrist. It’s more comfortable vs the old ref and it’s probably due to the slightly thinner case and redesigned endlink.

[Big Tex Rolex]

I am not a fan of “big cases / lugs” … I passed on the 11 Series Submariners for that very reason, and bought the second it came out, the 12 Series “Bluesy”.

There are some things I like about each, but …

my wish was, that they built the 12 Series Daytona using the left lugs of the 11 Series x 4 on the 12 Series … giving it a more tapered / sleek / proportionate look, as the lugs meld into the bracelet.

The wide body, making the bracelet look narrow, is holding me back.

We’ve been down this road before, when the 11 Series Submariner morphed into the 12 Series Submariner … emotions might be mixed from consumers, but most like the shape / proportions of the 12 Series Subs over the “maxi case” 11 Series Subs … someone at Rolex agreed, and a better looking watch (in my opinion) was delivered in the 12 Series Submariner …

I wish they had done the same with the 12 Series Daytona.

Other opinions will vary, this is just mine.

[time_and_cars]

Always the owners of previous ref. Says that is the one and the new one its hot shitt …. But at the end everyone knows that the new panda 12 series is the one and only …. Better dial , case proportions, sub dials …. Overall looks no way jose … 11 series owners cry but in silence:)

[Mystro]

Originally Posted by Mystro

Wow, there is something that I have not noticed with the case back. It appears the 12 series Daytona has a more domed case back???? That was one of the huge factors why the 11 series Daytona is so comfortable with its large flat case back that spreads its weight over a larger surface area on your wrist.

[img]

[mario1971]

I have a 116500LN Panda which I am very pleased with. I ordered 126500LN with a black dial a year ago. Congratulations to the creator of the topic on a good choice!

[rolexboy66]

Originally Posted by Mystro

[img]

After seeing this pic, now I understand why the asymmetry.. to balance the watch. The 126 from the back now looks kinda weird, seems the crown area protrudes out too much.

Anyway still prefer white 116 a million times over :)

[rolexboy66]

Originally Posted by mario1971

I have a 116500LN Panda which I am very pleased with. I ordered 126500LN with a black dial a year ago. Congratulations to the creator of the topic on a good choice!

Beautiful pics! And congrats on your choice too, indeed a gorgeous watch. Always peeping at my watch when I go out, like how I’d glance at a beautiful girl occasionally haha 😜

[Duke10]

Can’t decide!!!! Plus not sure I feel like waiting on my AD for the 12 lol. Maybe the most comfortable watch I’ve ever put on.


Sent from my iPhone using Tapatalk

[Topspin14m]

Originally Posted by rolexboy66

After seeing this pic, now I understand why the asymmetry.. to balance the watch. The 126 from the back now looks kinda weird, seems the crown area protrudes out too much.

Anyway still prefer white 116 a million times over :)

Good thing no one looks at watch from the back...

[huncho]

Originally Posted by Topspin14m

Good thing no one looks at watch from the back...

yeah but the same silhouette and proportions are still seen from the front though lol

[Topspin14m]

Originally Posted by huncho

yeah but the same silhouette and proportions are still seen from the front though lol

Yeah because the new one is horribly unbalanced. Everyone says that.

If you are buying second hand, you should probably get the 11, as the premium for the 12 isn't really worth it in my view. That said, I own, and prefer, the 12. But I would not have chosen it if I were getting one second hand and was facing all that extra $$.

[noshame]

Congrats, OP! I think any one of the 4 options would have been a winner!

[forg]

Congrats