ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
10 December 2010, 11:14 PM | #1 |
"TRF" Member
Join Date: Dec 2010
Location: US
Watch: 1680 Red & 16622
Posts: 2,449
|
Changing battery for Tag (please help)
In 2003 my wife bought me the Tag Heuer SeaRacer that I wanted from Baily Banks and Biddle.
A few years later I needed a new battery so I brought it back there and they told me they would need to send it back to Tag to have the battery changed because it needs to be done in some type of air tight pressure chamber (or something like that). So I sent it away and it came back several weeks later and they charged me a decent amount for it. A few more years went by and I needed another battery. By this time the Baily Banks and Biddle location was no longer there, so I brought it to another local AD (Lennox) that carried Tag. They did it right there on the spot and didn't even charge me (probably because at the time my wife and I were looking at Rolexes). Now my battery just died again - my question is, does my watch need to be sent to Tag for some special treatment to change the battery or can it be done by any high end AD? I'm not sure if Baily Banks and Biddle ripped me off or if Lennox just closed my watch back up in a way they weren't supposed to. Also, how much does a battery change for a Tag usually cost? And how often? Since 2003, I need my 3rd battery - I feel like that is more frequent than it should be. Thanks a ton for reading and helping!!! |
10 December 2010, 11:47 PM | #2 |
"TRF" Member
Join Date: Jan 2007
Real Name: bob j
Location: toledo, usa
Watch: Love 'em all
Posts: 525
|
You got ripped off by bbb
YG DAY DATE! :)
__________________
16610 Sub Date; 16570 Explorer ll (polar); GO Sport Evo; GP Seahawk ll; Tudor Hydronaut ll; Oris F1 Williams Chrono... |
11 December 2010, 12:02 AM | #3 |
Banned
Join Date: Jul 2008
Location: US
Watch: 3570.50
Posts: 2,156
|
A diver watch should always be pressure tested when the case-back is opened. Some AD's have the ability to do that in-house, others don't. Do you ever expose the watch to water? If so, you'll want to make sure it is tested when you change the battery.
|
11 December 2010, 12:11 AM | #4 |
Banned
Join Date: Dec 2009
Real Name: Paul
Location: New Haven, CT
Watch: 116610 Sub-C
Posts: 6,552
|
Save your money.
Buy a case opener from Ebay, or the Otto Frei website. Also purchase a container of silicone lube for gaskets. Open the caseback, and take the battery out. Get the correct size Energizer at the local store. Put the battery back in, and remove the rubber gasket. Put the gasket in the silicone lube container after a quick inspection. If the gasket looks good, it should be fine with a little silicone added. Screw the caseback on, and you should be good for another 1.5 - 2 years. That's the average life span. Some last 4 years, but that's rare. I wouldn't worry about pressure testing if your wife doesn't do more than take a shower in it. If you dive, that's another story. |
11 December 2010, 12:34 AM | #5 |
"TRF" Member
Join Date: Dec 2010
Location: US
Watch: 1680 Red & 16622
Posts: 2,449
|
I actually don't dive - but I wear my watch everywhere, as far as swimming, snorkling and I wouldnt rule out diving some day - so I definitely want the caseback put on correctly just in case.
thanks for the info thus far! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.