ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

howieleem · 10 July 2011, 09:46 PM

I am going to refurbish my Datejust 16013 case and need to know how to remove the movement before i start.
Is the movement fixed into the case in some way?

subtona · 10 July 2011, 09:58 PM

zoinks.

howieleem · 11 July 2011, 12:23 AM

After removing the back, bezel, lens and crown.

cameronweiss · 11 July 2011, 01:25 AM

Open the caseback
Tighten the two larger screws on the outer edge of the movement
Then rotate the movement until one of those screws is at the opening for the crown
The movement should come out if you flip over the case

Try to keep the movement as clean as possible and in a dust free container until it is ready to be re-installed

Rikki · 12 July 2011, 09:17 AM

Don't forget to take the stem out first

10 July 2011, 09:46 PM	#1
howieleem "TRF" Member Join Date: May 2011 Location: uk Watch: 16013 Datejust Posts: 39	How to remove Datejust movement? I am going to refurbish my Datejust 16013 case and need to know how to remove the movement before i start. Is the movement fixed into the case in some way?

10 July 2011, 09:58 PM	#2
subtona "TRF" Member Join Date: Jan 2011 Real Name: gus Location: East Coast Watch: APK & sometimes Y Posts: 26,054	zoinks. __________________

12 July 2011, 09:17 AM	#5
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	Don't forget to take the stem out first __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

11 July 2011, 12:23 AM	#3
howieleem "TRF" Member Join Date: May 2011 Location: uk Watch: 16013 Datejust Posts: 39	After removing the back, bezel, lens and crown.

11 July 2011, 01:25 AM	#4
cameronweiss Banned Join Date: May 2011 Real Name: Cameron Weiss Location: Miami, Florida Watch: Patek ref. 1579 Posts: 43	Open the caseback Tighten the two larger screws on the outer edge of the movement Then rotate the movement until one of those screws is at the opening for the crown The movement should come out if you flip over the case Try to keep the movement as clean as possible and in a dust free container until it is ready to be re-installed

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)