The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 31 July 2017, 02:08 PM   #1
Tazmo
Banned
 
Join Date: Aug 2016
Location: USA
Posts: 98
Icon2 Generic VS Genuine Gasket Quality

I'm wondering if the gaskets and O-rings included with the tubes sold by Rolex are made of some superior rubber that are much more durable, or are they pretty much the same as generic ones as sold here: http://www.esslinger.com/generic-rolex-crown-gaskets/

Anyone have any insight on this?
Tazmo is offline   Reply With Quote
Old 31 July 2017, 03:01 PM   #2
Andad
2024 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,692
I use 'O' rings in my chemical pumps for all types of chemicals including 70% sulphuric acid on our last Project.
They can be supplied in many different materials depending on the application.

To me 'rubber' is a very generic description.

PTFE, Nitrile (Buna), Neoprene, EPDM and Fluorocarbon (Viton). Kalrez ® o-rings etc. and silicone seals are also widely used for high temperature applications.

The more resistant an 'O' is to chemicals etc the more expensive they will be and the harder they will be to find in the critical size required.
The chances of an aftermarket 'O' ring being made from the same material as an Rolex 'O' ring would be small.

Just like the 'O' rings.

And NO ROLEX WARRANTY.
__________________
E

Andad is offline   Reply With Quote
Old 31 July 2017, 03:19 PM   #3
Tazmo
Banned
 
Join Date: Aug 2016
Location: USA
Posts: 98
If I use a generic gasket is it something I should be worried about? Would it last 5 years or more? Or am I just being extremely cautious? Honestly I just need to use one gasket and instead of spending $100+ on a tube set from Rolex I can spend $2.50 on a generic one.
Tazmo is offline   Reply With Quote
Old 5 August 2017, 05:07 AM   #4
chrisca70
"TRF" Member
 
chrisca70's Avatar
 
Join Date: May 2016
Location: USA - FL
Watch: ing you!
Posts: 130
I have those from Esslinger in my Tudor and zero problems. As long as you change them every 3-5 years a generic should be fine in normal wearing conditions. Make sure you lubricate it with silicon grease and replace the case back gasket as well. The crystal gasket should be replaced as well for peace of mind. Most importantly get it tested for leaks by your watchmaker...
chrisca70 is offline   Reply With Quote
Old 5 August 2017, 05:24 AM   #5
dysondiver
"TRF" Member
 
dysondiver's Avatar
 
Join Date: Jul 2010
Real Name: tom
Location: northern ireland
Watch: my fins
Posts: 10,063
ask a professional engineer , or a diver ,,, or a diving engineer is all rubber o rings are the same.
there are books written on the subject .
dysondiver is offline   Reply With Quote
Old 5 August 2017, 07:33 PM   #6
SearChart
TechXpert
 
SearChart's Avatar
 
Join Date: May 2012
Location: Earth
Posts: 23,443
It's not like Rolex's rubber is superior to other rubber, it's just rubber... If the generic gaskets fit fine there should be no problem.

I would however not use generic crystal gaskets.
__________________
Quote:
Originally Posted by GB-man View Post
Rolex uses rare elves to polish the platinum. They have a union deal and make like $90 per hour and get time and half on weekends.
SearChart is offline   Reply With Quote
Old 5 August 2017, 07:41 PM   #7
dysondiver
"TRF" Member
 
dysondiver's Avatar
 
Join Date: Jul 2010
Real Name: tom
Location: northern ireland
Watch: my fins
Posts: 10,063
Quote:
Originally Posted by SearChart View Post
It's not like Rolex's rubber is superior to other rubber, it's just rubber... If the generic gaskets fit fine there should be no problem.

I would however not use generic crystal gaskets.
once you lower the spec on one seal , you destroy the integrity of the whole machine.

you wouldnt go racing in a car with three road wheels , and the fourth off a wheel barrow.
dysondiver is offline   Reply With Quote
Old 5 August 2017, 08:16 PM   #8
Andad
2024 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,692
Quote:
Originally Posted by SearChart View Post
It's not like Rolex's rubber is superior to other rubber, it's just rubber... If the generic gaskets fit fine there should be no problem.

I would however not use generic crystal gaskets.
A plain old 'just rubber ' 'O' ring would not last a week on my chemical applications Bas.

Do some research.
__________________
E

Andad is offline   Reply With Quote
Old 5 August 2017, 08:28 PM   #9
SearChart
TechXpert
 
SearChart's Avatar
 
Join Date: May 2012
Location: Earth
Posts: 23,443
Quote:
Originally Posted by directioneng View Post
A plain old 'just rubber ' 'O' ring would not last a week on my chemical applications Bas.

Do some research.
I'm still sure that there is nothing wrong with a proper generic caseback gasket. Most I've come across in school were of high quality and all passed the pressure test.

I'm certain these will not fail if the watch is exposed to regular wear, swimming in the ocean/pool, etc.



But if you can, always go to an RSC or watchmaker with a parts account.
__________________
Quote:
Originally Posted by GB-man View Post
Rolex uses rare elves to polish the platinum. They have a union deal and make like $90 per hour and get time and half on weekends.
SearChart is offline   Reply With Quote
Old 14 September 2017, 06:02 AM   #10
SeaDwellerBund
"TRF" Member
 
Join Date: Jan 2008
Location: California, USA
Watch: SD4000 Steel&Gold
Posts: 49
Certainly not all seals are the same or perform as well as the original rated parts. I'd go for original parts only. JMO. Not going to replace with house brand tires when the original is Pirelli.
SeaDwellerBund is offline   Reply With Quote
Old 15 September 2017, 05:57 AM   #11
raulpsanch12
"TRF" Member
 
Join Date: Jul 2017
Location: USA
Watch: es & Watches &....
Posts: 38
Quote:
Originally Posted by SearChart View Post
It's not like Rolex's rubber is superior to other rubber, it's just rubber... If the generic gaskets fit fine there should be no problem.

I would however not use generic crystal gaskets.

I'd have to disagree with you on this one. Rubber isn't JUST rubber. There are good rubber and extremely horrible attempts of rubber out there. Research different rubber strap brands and see what other people say. This way you will have the best idea of what QAULITY rubber is.
raulpsanch12 is offline   Reply With Quote
Old 16 September 2017, 01:21 AM   #12
Lew_greene
"TRF" Member
 
Lew_greene's Avatar
 
Join Date: Jul 2017
Location: Chelmsford
Posts: 38
Quote:
Originally Posted by raulpsanch12 View Post
I'd have to disagree with you on this one. Rubber isn't JUST rubber. There are good rubber and extremely horrible attempts of rubber out there. Research different rubber strap brands and see what other people say. This way you will have the best idea of what QUALITY rubber is.

Agreed. I prefer quality rubber for my watches. I think people are ignorant to the how good rubber can make a watch look and feel.
Lew_greene is offline   Reply With Quote
Old 16 September 2017, 03:40 AM   #13
Leeq
"TRF" Member
 
Leeq's Avatar
 
Join Date: Jul 2017
Location: San Francisco
Posts: 185
Rubber is my favorite, and if you ever considered or want to consider a rubber strap I would go with Rubber B.
Attached Images
File Type: jpg Lee Quinton.jpg (67.3 KB, 174 views)
Leeq is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.