ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
9 June 2018, 05:59 AM | #1 |
"TRF" Member
Join Date: Jun 2018
Location: Northeast
Posts: 4
|
Independent Watchmaker for Late 70s Datejust Overhaul
Hello everyone. New poster here just looking for you all to weigh in regarding my decision to service my datejust. Serial indicates it has a late 70s manufacture date with a 3035 movement. The watch was a gift from my father and has never been serviced. It was running a bit slow ~-8 seconds a day and I wanted to get ahead of any further wear daily use might cause. I took it to an independent CW21 watchmaker here in the Boston metro area, who quoted me ~$700 USD for a full movement overhaul, regulation, cleaning, and replacement of parts, polish, with a 6-10 week turnaround time. This includes water resistance testing.
I admit I am somewhat paranoid, so I tried to shop around a bit and was assured by a representative of this shop that the watchmaker had a Rolex parts account, even though Rolex is not even mentioned on their site anywhere. However, on their site they assure that they use "only genuine parts for all brands they service." I hate to assume the worst about people, but how can I be sure that this individual does in fact have a Rolex parts account aside from their verbal assurance? I've had non CW21 watchmakers tell me they have parts accounts, which I didn't think was possible when it came to Rolex. Does the estimate and timeframe sound fair? My question is how does one use genuine Rolex parts if they dont have a parts account? Did I make a mistake here? Appreciate the thoughts. -Sevo |
10 June 2018, 02:23 PM | #2 |
"TRF" Member
Join Date: Jun 2018
Location: Northeast
Posts: 4
|
Furthermore, I was told by the shop that Rolex still stocks parts for the 3035 movement. Does anyone here know that to be true for a fact?
|
11 June 2018, 02:17 AM | #3 |
2024 Pledge Member
Join Date: Jan 2009
Real Name: Aaron
Location: CT/NYC
Watch: ing the time!
Posts: 6,791
|
In a case like this, I would use a Rolex Service Center. Go to AD Lux Bond & Green in Boston. They can handle it. They'd send it to the NYC RSC. The cost and turnaround time would be about the same as you describe at the other place, but you'd get Rolex paperwork and the factory warranty. You also wouldn't need to worry about getting correct parts.
However, make sure you tell them you want a movement service ONLY. Do not allow them to change the dial and hands, and tell them no polishing! (This assumes you want to protect the vintage soul of the watch.) Make sure you get them to put it on the paperwork. Good luck! |
11 June 2018, 07:49 AM | #4 |
"TRF" Member
Join Date: Jul 2013
Real Name: Sam
Location: los Angeles
Posts: 2,051
|
For that kind of money, I would rather send to RSC. Independents even with Rolex account usually charge less than that.
Sent from my iPhone using Tapatalk |
11 June 2018, 07:56 AM | #5 |
"TRF" Member
Join Date: May 2018
Real Name: Bill
Location: Louisiana (US)
Posts: 68
|
|
11 June 2018, 08:30 AM | #6 |
"TRF" Member
Join Date: Nov 2012
Location: New Mexico
Watch: GMT 1675
Posts: 331
|
Watchmaker International in Arlington, TX. Best in the business as many here will agree.
www.watchmakers.com |
11 June 2018, 02:31 PM | #7 | |
"TRF" Member
Join Date: Jun 2017
Real Name: Rick
Location: SW Oklahoma
Watch: GMT, Daytona
Posts: 147
|
Quote:
I just had Phillip Ridley bring my 1981 Rootbeer GMT 16753 back to life. Words can't express my satisfaction. I'm looking at this watch back on my wrist and all I can do is grin. :) Communication was great throughout the process, price was fair and the quality of work was outstanding. Phillip and Watchmakers International have my highest recommendation. |
|
15 June 2018, 03:04 AM | #8 |
"TRF" Member
Join Date: Dec 2016
Real Name: Mike
Location: Philadelphia
Watch: 1016
Posts: 88
|
Go with reputation- I recommend LAWW
__________________
14060 | 15000 |
15 June 2018, 07:08 AM | #9 |
"TRF" Member
Join Date: Jan 2018
Real Name: Carl
Location: Springfield
Watch: DSSD
Posts: 43
|
|
15 June 2018, 09:01 AM | #10 |
"TRF" Member
Join Date: May 2018
Real Name: Bill
Location: Louisiana (US)
Posts: 68
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.