The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 18 February 2019, 09:40 AM   #1
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Icon5 Starter Watch Tools

Looking to pickup a few watch tools to allow me to change bracelets, add/remove links, push pins, and yes...even change a battery (wife has another watch with battery).

Hard to find the true Rolex 2100, but I saw this Horofix one which was cheaper and looks similar. Anyone have experience?
Horofix Generic Rolex® 2100 Bracelet Adjusting Tool
https://www.esslinger.com/horofix-ge...djusting-tool/
Also found this basic starter kit on Panatime.com. Thoughts? Had anyone purchased this? Is it somewhat quality to start?
https://panatime.com/the-essential-tool-kit/

Other suggestions?
pedersenkl is offline   Reply With Quote
Old 18 February 2019, 09:59 AM   #2
Richard Carver
"TRF" Member
 
Richard Carver's Avatar
 
Join Date: Apr 2015
Location: US
Posts: 2,237
The tool kit is useless. Get the specific tool for your purpose. The bracelet tool looks fine and in the 'related products' there is a punch set for pin bracelets that looks good.

A good screwdriver set is handy, I've used one like this for years, https://www.ebay.com/itm/9-Pcs-Preci...7tEZIhpA%3D%3D

You can spend a lot more if you like but for us dilettantes this works well. Buying tools is a slippery slope, have fun. :)

This is my case back opener...

:)
Richard Carver is offline   Reply With Quote
Old 18 February 2019, 10:47 AM   #3
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Thanks. No professional here, just looking to DIY for the basics every now and then to avoid going into an AD or jeweler. I generally trust myself vs someone else for small needs.

Seems I need the following:

1. Springbar tool - Seems many like Bergeon 6767-F?

2. Hollow Ground Screwdriver - 1.6 to 1.7mm. Most love Rolex 2100, but hard to find and pricey. Most also love Panerai 1.6 mm, but also hard to find. Only some like Bergeon. Confusing. Which to buy and from where?

3. Pin remover. Bergeon 7230 looks decent and not too pricey. There are plenty on Ebay, Amazon, etc. Is brand name worth it here?


Rather than buy all separate, are there any reasonable priced kits that others suggest?
pedersenkl is offline   Reply With Quote
Old 18 February 2019, 11:05 AM   #4
RJRJRJ
"TRF" Member
 
RJRJRJ's Avatar
 
Join Date: Aug 2011
Location: USA
Posts: 3,496
Quote:
Originally Posted by pedersenkl View Post
Thanks. No professional here, just looking to DIY for the basics every now and then to avoid going into an AD or jeweler. I generally trust myself vs someone else for small needs.

Seems I need the following:

1. Springbar tool - Seems many like Bergeon 6767-F?

2. Hollow Ground Screwdriver - 1.6 to 1.7mm. Most love Rolex 2100, but hard to find and pricey. Most also love Panerai 1.6 mm, but also hard to find. Only some like Bergeon. Confusing. Which to buy and from where?

3. Pin remover. Bergeon 7230 looks decent and not too pricey. There are plenty on Ebay, Amazon, etc. Is brand name worth it here?


Rather than buy all separate, are there any reasonable priced kits that others suggest?

1. I have a 6767-F and it will get the job done. 7825 is probably the better tool but way more expensive.

2. 1.6mm hollow ground for oyster bracelets.

3. 7230 is cheap enough that I don't think you should debate the brand name thing. For me, I prefer the tool that works better, but if I barely use it and theres a big difference in price, I may go for the cheapo one like my eBay screwdriver (was <$10).


I haven't come across any kit that is good, unless you spring for something very expensive and you'll end up with a bunch of stuff you don't need.
RJRJRJ is offline   Reply With Quote
Old 18 February 2019, 11:13 AM   #5
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Quote:
Originally Posted by RJRJRJ View Post

2. 1.6mm hollow ground for oyster bracelets.
For the 1.6mm hollow ground screwdriver, which is best option that is easily available for purchase within a reasonable price. It seems there are many opinions on this....with only consistency being that Rolex 2100 and Panerai PAV00524 being the two preferred. Problem is, I cannot find either. Which is next best option?

I'm trying to avoid this -> https://www.rolexforums.com/showthread.php?t=657822 which actually partially happened to me at a Rolex AD previously on my Daytona bracelet. Rolex AD messed up the screw and left a scratch on the link. Neither as bad as the link above, but noticeable that you can tell where the watch was sized. I think I can do a better job personally.....with a few basic (but quality) tools at reasonable prices. Thus my ask :)
pedersenkl is offline   Reply With Quote
Old 18 February 2019, 11:55 AM   #6
RJRJRJ
"TRF" Member
 
RJRJRJ's Avatar
 
Join Date: Aug 2011
Location: USA
Posts: 3,496
Quote:
Originally Posted by pedersenkl View Post
For the 1.6mm hollow ground screwdriver, which is best option that is easily available for purchase within a reasonable price. It seems there are many opinions on this....with only consistency being that Rolex 2100 and Panerai PAV00524 being the two preferred. Problem is, I cannot find either. Which is next best option?

I'm trying to avoid this -> https://www.rolexforums.com/showthread.php?t=657822 which actually partially happened to me at a Rolex AD previously on my Daytona bracelet. Rolex AD messed up the screw and left a scratch on the link. Neither as bad as the link above, but noticeable that you can tell where the watch was sized. I think I can do a better job personally.....with a few basic (but quality) tools at reasonable prices. Thus my ask :)
https://www.ebay.com/itm/Cut-out-1-6...tem33ee425378\

I have this one and it works well. I can't really say much about it other than that, but I've also used the wrong screwdrivers in the past with varying results.
RJRJRJ is offline   Reply With Quote
Old 18 February 2019, 12:19 PM   #7
Anthonyw
"TRF" Member
 
Join Date: Nov 2018
Location: Chicago
Posts: 90
Starter Watch Tools

Quote:
Originally Posted by RJRJRJ View Post
I haven't come across any kit that is good, unless you spring for something very expensive and you'll end up with a bunch of stuff you don't need.

Agreed, I regret buying a toolkit on amazon. It was only $20 but felt like a waste of money. I picked up a set of screwdrivers from Esslinger and they made resizing my 116710 oyster bracelet a breeze (Select set of 4 screwdrivers made in France for $20). My 6767-F just got delivered to me and I’m excited to try that out.
Anthonyw is offline   Reply With Quote
Old 18 February 2019, 12:22 PM   #8
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Quote:
Originally Posted by Anthonyw View Post
Agreed, I regret buying a toolkit on amazon. It was only $20 but felt like a waste of money. I picked up a set of screwdrivers from Esslinger and they made resizing my 116710 oyster bracelet a breeze (Select set of 4 screwdrivers made in France for $20). My 6767-F just got delivered to me and I’m excited to try that out.
Which Esslinger screwdriver set did you pickup? There are so many, hard to choose which is best.
pedersenkl is offline   Reply With Quote
Old 18 February 2019, 12:46 PM   #9
stylinleems
2024 Pledge Member
 
stylinleems's Avatar
 
Join Date: Mar 2011
Location: N/A
Posts: 3,161
I own the Bergeron 7825, 6767-F, and Panerai 1.6mm screwdriver (if you can get your hands on the Rolex 2100, that will be a perfect fit for most oyster bracelets).

If 63200/63600 bracelet, you will need a 1.3mm screwdriver.

I prefer to use the 6767 when removing the spring bars as it provides more control (and you depress only one side at a time and pull upwards to grab. Less chance of scratches on the lugs). I personally find the 7825 a bit difficult to use.

Remember to always tape the lugs just in case.
stylinleems is online now   Reply With Quote
Old 18 February 2019, 01:22 PM   #10
JR16
2024 Pledge Member
 
Join Date: Jan 2013
Location: USA
Posts: 6,174
Quote:
Originally Posted by pedersenkl View Post
Looking to pickup a few watch tools to allow me to change bracelets, add/remove links, push pins, and yes...even change a battery (wife has another watch with battery).



Hard to find the true Rolex 2100, but I saw this Horofix one which was cheaper and looks similar. Anyone have experience?


Horofix Generic Rolex 2100 Bracelet Adjusting Tool

https://www.esslinger.com/horofix-ge...djusting-tool/


Also found this basic starter kit on Panatime.com. Thoughts? Had anyone purchased this? Is it somewhat quality to start?


https://panatime.com/the-essential-tool-kit/




Other suggestions?
I got the Horofix Generic Rolex 2100 tool recently and like it better than my Bergeron 1.6 screwdriver for Rolex oyster bracelets






Sent from my iPhone using Tapatalk Pro
JR16 is offline   Reply With Quote
Old 18 February 2019, 01:42 PM   #11
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Quote:
Originally Posted by JR16 View Post
I got the Horofix Generic Rolex 2100 tool recently and like it better than my Bergeron 1.6 screwdriver for Rolex oyster bracelets
Thanks. Nice to see someone purchased it and seems to like it! What do you like better about it? Just fits better, or?

The Horofix Generic Rolex 2100 does look decent, and it appears to have the flatter screwdriver edge on it by looking at the photos online and I think it is technically 1.7mm vs 1.6mm on most screwdrivers.

At $50, it's not a bank breaker...and well cheaper than current Rolex 2100 online, which is +/- $200.
pedersenkl is offline   Reply With Quote
Old 18 February 2019, 02:17 PM   #12
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
https://www.newark.com/wiha/26012/ti...6mm/dp/96B4751
toxicavenger is offline   Reply With Quote
Old 18 February 2019, 02:21 PM   #13
Boaters
2024 Pledge Member
 
Join Date: May 2015
Real Name: Mike
Location: Pacific Northwest
Watch: 116610LV 16710 SD
Posts: 10,649
This will pretty much do what you need at least for me. I have added a few things since the picture. The Panerai 1.6 driver is one. The Rolex 2100 tool is the best driver I have found but don't come cheap at $100+ if you can find one.
Boaters is offline   Reply With Quote
Old 18 February 2019, 02:27 PM   #14
Boaters
2024 Pledge Member
 
Join Date: May 2015
Real Name: Mike
Location: Pacific Northwest
Watch: 116610LV 16710 SD
Posts: 10,649
Here is where you can purchase.
http://www.ofrei.com/page252.html
Boaters is offline   Reply With Quote
Old 18 February 2019, 02:40 PM   #15
Anthonyw
"TRF" Member
 
Join Date: Nov 2018
Location: Chicago
Posts: 90
https://www.esslinger.com/watch-scre...ver-set-4-pcs/

That’s what I got
Anthonyw is offline   Reply With Quote
Old 18 February 2019, 06:34 PM   #16
joli160
2024 Pledge Member
 
joli160's Avatar
 
Join Date: Apr 2013
Location: NL
Watch: Yachtmaster
Posts: 14,279
Quote:
Originally Posted by Anthonyw View Post
This is not suitable for your full size oyster bracelet, too small.
__________________
Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711.
joli160 is offline   Reply With Quote
Old 18 February 2019, 07:57 PM   #17
Devildog
"TRF" Member
 
Devildog's Avatar
 
Join Date: Jul 2009
Real Name: Scott
Location: UK
Watch: ^^^ for now
Posts: 5,581
Quote:
Originally Posted by pedersenkl View Post
Looking to pickup a few watch tools to allow me to change bracelets, add/remove links, push pins, and yes...even change a battery (wife has another watch with battery).

Hard to find the true Rolex 2100, but I saw this Horofix one which was cheaper and looks similar. Anyone have experience?
Horofix Generic Rolex® 2100 Bracelet Adjusting Tool
https://www.esslinger.com/horofix-ge...djusting-tool/
Also found this basic starter kit on Panatime.com. Thoughts? Had anyone purchased this? Is it somewhat quality to start?
https://panatime.com/the-essential-tool-kit/

Other suggestions?
All you need is the Bergeon 7825 tweezers which have the correct narrow tips, and if you can't get an original Rolex 2100 tool, that Horofix tool looks perfect.

Rolex bracelet screws are 1.3 mm and 1.7 mm (not 1.6 mm as many think)

The OEM Panerai 1.6 mm hollow ground screwdriver which I have works very well as a "second best" solution

__________________
Past: 6239 (yes, I know...), 16610, 16600, 116515, 116613LN, 126600, 126711 CHNR

Present: 16600, 116509, Cartier Santos Green.
Devildog is offline   Reply With Quote
Old 18 February 2019, 08:44 PM   #18
Andad
2024 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,694
We need a sticky with the correct sizes and suppliers for these tools.

Not a cross section of bad choices.

There are correct items in this thread but how does the average punter find them?

IMHO of course.

Example......

https://www.newark.com/wiha/26012/ti...6mm/dp/96B4751

Is this hollow ground?

__________________
E

Andad is offline   Reply With Quote
Old 18 February 2019, 09:36 PM   #19
JR16
2024 Pledge Member
 
Join Date: Jan 2013
Location: USA
Posts: 6,174
Quote:
Originally Posted by pedersenkl View Post
Thanks. Nice to see someone purchased it and seems to like it! What do you like better about it? Just fits better, or?



The Horofix Generic Rolex 2100 does look decent, and it appears to have the flatter screwdriver edge on it by looking at the photos online and I think it is technically 1.7mm vs 1.6mm on most screwdrivers.



At $50, it's not a bank breaker...and well cheaper than current Rolex 2100 online, which is +/- $200.


The fit is better as it is 1.7 instead of 1.6, and better shape . No wobble when unscrewing/screwing.


Sent from my iPhone using Tapatalk Pro
JR16 is offline   Reply With Quote
Old 19 February 2019, 02:26 AM   #20
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Quote:
Originally Posted by directioneng View Post
We need a sticky with the correct sizes and suppliers for these tools.

Not a cross section of bad choices.

There are correct items in this thread but how does the average punter find them?

IMHO of course.
+1 - This would be very valuable. I'm a DIY person in general. While not new to watches, I am new to DIY for minor watch work. Takes a bit of work to identify best tools that are available and within reasonable cost for a starter set. Appreciate everyone's input!
pedersenkl is offline   Reply With Quote
Old 19 February 2019, 02:30 AM   #21
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Quote:
Originally Posted by JR16 View Post
The fit is better as it is 1.7 instead of 1.6, and better shape . No wobble when unscrewing/screwing.


Sent from my iPhone using Tapatalk Pro
Thanks. I chose to move forward with the following 3 items to get me started, including the Horofix 2100 tool. Seems it is a better option and most closely resembles the actual Rolex 2100 tool at lower cost.

1. Horofix Generic Rolex 2100 Tool
https://www.esslinger.com/horofix-ge...djusting-tool/

2. Bergeon 6767-F
https://www.esslinger.com/bergeon-67...ring-bar-tool/

3. Generic Watch Band Pin Remover
https://www.esslinger.com/watch-band...-little-giant/
pedersenkl is offline   Reply With Quote
Old 19 February 2019, 10:01 AM   #22
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
Quote:
Originally Posted by directioneng View Post
We need a sticky with the correct sizes and suppliers for these tools.

Not a cross section of bad choices.

There are correct items in this thread but how does the average punter find them?

IMHO of course.

Example......

https://www.newark.com/wiha/26012/ti...6mm/dp/96B4751

Is this hollow ground?

Actually it is the perfect screwdriver for someone who isn't changing links all day long.

Have you actually used Wiha screwdriver to say it won't work??

Not everyone needs $150 in tools to remove a bracelet on a watch.
toxicavenger is offline   Reply With Quote
Old 19 February 2019, 10:33 AM   #23
JR16
2024 Pledge Member
 
Join Date: Jan 2013
Location: USA
Posts: 6,174
Quote:
Originally Posted by toxicavenger View Post
Actually it is the perfect screwdriver for someone who isn't changing links all day long.



Have you actually used Wiha screwdriver to say it won't work??



Not everyone needs $150 in tools to remove a bracelet on a watch.


These Wiha drivers are great. Used the 1.8 to size my seamaster


Sent from my iPhone using Tapatalk Pro
JR16 is offline   Reply With Quote
Old 19 February 2019, 10:58 AM   #24
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
Quote:
Originally Posted by JR16 View Post
These Wiha drivers are great. Used the 1.8 to size my seamaster


Sent from my iPhone using Tapatalk Pro
What, say it aint' so???? You can't say that out loud. It isn't HOLLOW GROUND.
toxicavenger is offline   Reply With Quote
Old 19 February 2019, 11:45 AM   #25
HogwldFLTR
2024 Pledge Member
 
HogwldFLTR's Avatar
 
Join Date: Aug 2012
Real Name: Lee
Location: 42.48.45N70.48.48
Watch: What's on my wrist
Posts: 33,249
FWIW, the Panatine kit is pretty much useless for Rolex watches.
__________________
Troglodyte in residence!

https://www.rolexforums.com/showthread.php?t=808599
HogwldFLTR is offline   Reply With Quote
Old 26 February 2019, 01:34 PM   #26
pedersenkl
"TRF" Member
 
pedersenkl's Avatar
 
Join Date: Jul 2012
Location: NC
Watch: Daytona, GMT, Sub
Posts: 364
Reporting back. The 3 tools I purchased worked wonderfully for my needs. Thanks all!

BTW - The Horofix Rolex 2100 Tool is a perfect fit at 1.7mm.


1. Horofix Generic Rolex 2100 Tool
https://www.esslinger.com/horofix-ge...djusting-tool/

2. Bergeon 6767-F
https://www.esslinger.com/bergeon-67...ring-bar-tool/

3. Generic Watch Band Pin Remover
https://www.esslinger.com/watch-band...-little-giant/
pedersenkl is offline   Reply With Quote
Old 26 February 2019, 07:47 PM   #27
Chadridv
2024 Pledge Member
 
Chadridv's Avatar
 
Join Date: Oct 2014
Real Name: Chadri
Location: LI, NY
Watch: 116610LV
Posts: 11,322
I have the generic 2100 tool. Works great.

For all the other screwdriver sizes in between I have curvature blade bergeon drivers (1.3mm, 1.4mm & 1.6mm)
http://www.ofrei.com/page1727.html#34525

Bergeon tweezers are a must for bracelet removal...
https://www.esslinger.com/bergeon-78...-bar-tweezers/
Chadridv is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.