ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

altoonabcm157 · 1 August 2011, 12:30 PM

I just put on my z serial pepsi gmt master II after its been sitting for a bit and went to turn the bezel and it feels wierd. doesn't seem to have that crisp clicking feel and also seems to be binding and getting stuck as I turn it. happens when turned in both directions. any ideas how to resolve this or what could be causing this.

jekuo · 1 August 2011, 01:48 PM

It's probably got some dirt or other debris under the bezel. If you know how to remove the bezel, pop it off and clean it out. Or you could run some water over it and work the bezel back and forth to try and wash any debris out.

Tools · 1 August 2011, 01:50 PM

Run it under some warm water, then squirt liquid hand soap and turn it a few times.. The soap and warm water should flush any grit out.

altoonabcm157 · 1 August 2011, 02:15 PM

soap and warm water seems to have resolved the issue. thanks guys.

1 August 2011, 12:30 PM	#1
altoonabcm157 "TRF" Member Join Date: Sep 2010 Real Name: Brent Location: Northern NJ Watch: 16710 Posts: 46	GMT Bezel Question I just put on my z serial pepsi gmt master II after its been sitting for a bit and went to turn the bezel and it feels wierd. doesn't seem to have that crisp clicking feel and also seems to be binding and getting stuck as I turn it. happens when turned in both directions. any ideas how to resolve this or what could be causing this.

1 August 2011, 01:50 PM	#3
Tools TRF Moderator & 2024 DATE-JUST41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,103	Run it under some warm water, then squirt liquid hand soap and turn it a few times.. The soap and warm water should flush any grit out. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

1 August 2011, 01:48 PM	#2
jekuo Member Join Date: Mar 2010 Real Name: James Location: SoCal Watch: 16710B-M Series Posts: 288	It's probably got some dirt or other debris under the bezel. If you know how to remove the bezel, pop it off and clean it out. Or you could run some water over it and work the bezel back and forth to try and wash any debris out.

1 August 2011, 02:15 PM	#4
altoonabcm157 "TRF" Member Join Date: Sep 2010 Real Name: Brent Location: Northern NJ Watch: 16710 Posts: 46	soap and warm water seems to have resolved the issue. thanks guys.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)