ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
12 November 2011, 06:46 AM | #1 |
"TRF" Member
Join Date: Apr 2011
Real Name: Dave
Location: PA
Watch: Rolex Sub TT
Posts: 53
|
How to remove a light scratch in a brushed Sub bracelet?
I recently got a small scratch on my brushed finish Sub Bracelet, not deep, but enought to catch a nail on if you drag across the area. Is there a easy fix to this annoying scratch that I see? Help!
__________________
Current: Rolex Submariner 126613LB Rolex Sea-Dweller 126600 Rolex GMT 12670LB Omega Seamaster 300 GMT |
12 November 2011, 10:43 AM | #2 |
"TRF" Member
Join Date: May 2011
Location: Nor Cal
Posts: 272
|
Check into Scotch Brite pads!! They work wonders.
|
12 November 2011, 11:57 PM | #3 |
"TRF" Member
Join Date: Apr 2011
Real Name: Dave
Location: PA
Watch: Rolex Sub TT
Posts: 53
|
Scotch Brite
Do you have to worry about the amount of pressure applied?
__________________
Current: Rolex Submariner 126613LB Rolex Sea-Dweller 126600 Rolex GMT 12670LB Omega Seamaster 300 GMT |
13 November 2011, 12:00 AM | #4 |
2024 Pledge Member
Join Date: Dec 2006
Real Name: D'OH!
Location: Kentucky
Watch: Rolex-1 Tudor-3
Posts: 35,859
|
It's not so much about the amount of pressure as it is making sure your strokes are straight as possible.
dP
__________________
TRF Member# 1668 Bass Player in TRF "AFTER DARK" Bar & NightClub Band Commander-in-Chief of The Nylon Nation The Crown & Shield Club Honorary Member of P-Club |
13 November 2011, 12:02 AM | #5 |
"TRF" Member
Join Date: Apr 2011
Real Name: Dave
Location: PA
Watch: Rolex Sub TT
Posts: 53
|
Staying Straight
Got it...Thanks
__________________
Current: Rolex Submariner 126613LB Rolex Sea-Dweller 126600 Rolex GMT 12670LB Omega Seamaster 300 GMT |
13 November 2011, 12:07 AM | #6 |
"TRF" Member
Join Date: Nov 2007
Location: Perth/Singapore
Posts: 1,764
|
last time i brushed an ipod classic, i used two pieces of wood with dead straight edges, and sat the ipod face down, with the scotchbrite stuck on a solid piece of wood, and the block with the scotchbrite inbetween the wood keeping it dead straight.
not sure if polishing a bracelet would be as easy tho.
__________________
Want to Buy:SS GMT black;116509 WG Daytona Metrorite |
13 November 2011, 12:08 AM | #7 |
2024 Pledge Member
Join Date: Dec 2006
Real Name: D'OH!
Location: Kentucky
Watch: Rolex-1 Tudor-3
Posts: 35,859
|
Also, once you've removed the scratch and the brush strokes are straight. Go over the same area w/ 0000 steel wool to give it a finer finish.
dP
__________________
TRF Member# 1668 Bass Player in TRF "AFTER DARK" Bar & NightClub Band Commander-in-Chief of The Nylon Nation The Crown & Shield Club Honorary Member of P-Club |
13 November 2011, 12:26 AM | #8 |
"TRF" Member
Join Date: Apr 2011
Real Name: Dave
Location: PA
Watch: Rolex Sub TT
Posts: 53
|
good tip, I'll pick some up when i p/up the scotch pad
__________________
Current: Rolex Submariner 126613LB Rolex Sea-Dweller 126600 Rolex GMT 12670LB Omega Seamaster 300 GMT Last edited by GoDogGo; 13 November 2011 at 12:26 AM.. Reason: Thanks |
13 November 2011, 08:49 AM | #9 |
Banned
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
|
|
13 November 2011, 11:08 PM | #10 |
"TRF" Member
Join Date: Apr 2011
Real Name: Dave
Location: PA
Watch: Rolex Sub TT
Posts: 53
|
I'm guessing a Home Depot, Lowes or similar store.
__________________
Current: Rolex Submariner 126613LB Rolex Sea-Dweller 126600 Rolex GMT 12670LB Omega Seamaster 300 GMT |
14 November 2011, 12:03 AM | #11 |
2024 Pledge Member
Join Date: Dec 2006
Real Name: D'OH!
Location: Kentucky
Watch: Rolex-1 Tudor-3
Posts: 35,859
|
Yeah, or any hardware store.
dP
__________________
TRF Member# 1668 Bass Player in TRF "AFTER DARK" Bar & NightClub Band Commander-in-Chief of The Nylon Nation The Crown & Shield Club Honorary Member of P-Club |
27 November 2011, 02:54 AM | #12 |
Member
Join Date: Jan 2010
Real Name: Dennis Garrett
Location: Land of Oz
Watch: Rolex Explorer II
Posts: 405
|
On my first EXP II, I got a long, nasty gouge on the bracelet, next to the clasp. It was too deep to take out with Scotchbrite. I had to use a burnshing tool. I have a big hard rubber mallet on my work bench. I clamped it vertically in my bench vise. I wrapped a hand towel around the rubber head, which is roughly a little bigger around than my wrist. I slipped the watch over the towel, and rotated the scratched link around to the top. Then I went to work with the burnishing tool. I was surprised how easily I was able to work the scratch out with a little effort and the hard rubber backing. When I got done with that, I touched up several other scratches the same way. The areas I worked on had a smooth glassy look when I got done, and with a few stroke with the Scotchbrite, it was pretty much restored. I think I was able to save a lot of stainless by working the scratch out rather than just sanding it away metal to take it out. (Search Ebay for Straight burnisher)
|
27 November 2011, 08:00 AM | #13 |
"TRF" Member
Join Date: Jul 2007
Real Name: Gary
Location: GMT-6
Watch: GMT
Posts: 3,350
|
Scotch Brite woks fine but I prefer the Bergeon 5444 bars. They are exactly the same brush as the Rolex. Use medium and fine.
__________________
Omega Seamaster 300M GMT Noire Omega Seamaster Aqua Terra 8500 Benson 1937 Sterling Silver Hunter |
6 December 2011, 03:11 PM | #14 |
"TRF" Member
Join Date: Sep 2011
Location: Chicago, IL
Watch: Too many to narrow
Posts: 585
|
Forget the scotch brite. Use the nail buffer pictures above. $2 from Walgreens. |
8 December 2011, 03:09 PM | #15 |
2024 Pledge Member
Join Date: Nov 2011
Real Name: Chris
Location: Houston, Texas
Watch: SUB LV-C/Pepsi C
Posts: 415
|
|
8 December 2011, 07:18 PM | #16 |
"TRF" Member
Join Date: Aug 2009
Real Name: George
Location: Seattle
Watch: One of Them
Posts: 6,924
|
I would recommend masking off the bracelet edge with masking tape so you do not scratch the polished edging.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.