The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 14 February 2019, 06:01 AM   #1
rubydog
"TRF" Member
 
Join Date: Feb 2019
Location: USA
Posts: 2
Just inherited 5513 - What next?

Hello,

I am new here. I was recently given a 5513 (1.7xxxxx) that has probably not been worn for at least 15 years. It was probably in a dresser drawer. My local dealer sent it to a Rolex Service Center, and this is what they recommend:

Necessary
Full Service - $1000
Crown 704-0 AC MONOBLOC - $87

Optional
DIAL - $510
HANDS - $69
SECOND HAND - $36
BEZEL DISC - $48

In my uneducated opinion, all of the optional parts look okay to me. Seems like it is better to not replace them?

I have the original bracelet, but they say it is beyond repair. It is in rough shape, very "stretched". Recommending a 93150 20/16 580 12 link for $1062.

The full service will replace the acrylic crystal (pretty scratched up), but it also includes "refinishing of the case". I have read that maybe I should not "refinish" the case? It is not in bad shape, just the normal wear that could be expected.

Any advice would be appreciated.

Thanks
rubydog is offline   Reply With Quote
Old 14 February 2019, 08:13 AM   #2
1675-David
"TRF" Member
 
1675-David's Avatar
 
Join Date: Jan 2011
Location: Stockholm
Posts: 6,006
Don’t replace the dial and hands... or the bezel insert. Just the service on the movement without polishing the case.

PS don’t replace the bracelet either!

Welcome to the forum and please post an image. (Of the watch)
1675-David is offline   Reply With Quote
Old 14 February 2019, 08:24 AM   #3
dhknola
"TRF" Member
 
dhknola's Avatar
 
Join Date: Dec 2017
Location: New Orleans
Posts: 1,152
What David said!!! Do not let them 'kill it' with new parts!
dhknola is offline   Reply With Quote
Old 14 February 2019, 08:31 AM   #4
shaunylw
"TRF" Member
 
shaunylw's Avatar
 
Join Date: Jun 2013
Location: Here
Posts: 4,504
I would be ok with full service, no polishing of anything, and the crown as long as they returned the original crown. Unless it pressure tests with the existing crown then i would just ok the service. Which, i can’t imagine it wouldn’t test fine with the existing crown.


Sent from my iPhone using Tapatalk
shaunylw is offline   Reply With Quote
Old 14 February 2019, 09:06 AM   #5
HarryLime
"TRF" Member
 
HarryLime's Avatar
 
Join Date: May 2018
Location: NY
Posts: 676
Have them send it back to you UNTOUCHED, and then send it to a CW21 independant watchmaker!! I recommend Philip Ridley
HarryLime is offline   Reply With Quote
Old 14 February 2019, 09:11 AM   #6
TimeToGo
2024 Pledge Member
 
Join Date: Sep 2008
Location: North Florida
Posts: 16,568
Welcome to the forum!

First off, hopefully it has the original dial/hands.

Post a picture and I am sure folks will be able to provide you better guidance...

Cheers!
TimeToGo is offline   Reply With Quote
Old 14 February 2019, 10:53 AM   #7
SunTzu
"TRF" Member
 
SunTzu's Avatar
 
Join Date: Jan 2019
Location: NJ
Watch: 5513 116234 79280P
Posts: 2,144
Do not go for the optional parts!!!!!!!!!!!! Leave the original parts which not just adds to the value, but keeps the integrity of the originality. That's the beauty of it.

I inherited a 5513 a long time ago and had it serviced and left everything original except the crown which I got back and no polishing. They tried the same thing with me and replacing those exact same parts. It runs like a champ and looks exactly like the way my grandfather wore it. Just how I wanted it, down to the 51 year old discolored bezel pearl.
SunTzu is offline   Reply With Quote
Old 14 February 2019, 12:24 PM   #8
stmoore
Banned
 
Join Date: Nov 2012
Location: US
Watch: Gilt
Posts: 1,592
Post some photos we can provide better answers.
stmoore is offline   Reply With Quote
Old 14 February 2019, 02:48 PM   #9
Tools
TRF Moderator & 2024 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 42,991
Rolex always recommends replacing the dial and hands if the lume no longer glows, which it won't in an older Sub.

If the plots and hands are still intact and look good, replacing them will affect the originality/value of your heirloom. I wouldn't do it because the lume in a watch really isn't good enough to be of much use vs. loss of originality.

Since Rolex only "recommends" those parts be replaced, there is likely nothing physically wrong with them and they are sound. Keep them, you could always change them out at some future date if needed.
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 15 February 2019, 02:42 AM   #10
athom
"TRF" Member
 
Join Date: Oct 2017
Location: Paris (France)
Posts: 688
Post pictures of the watch in its now-state first ! I'd service the caliber but I'd for sure not to anything optional (and not because of a money reason) !
athom is offline   Reply With Quote
Old 15 February 2019, 03:03 AM   #11
Redtele58
"TRF" Member
 
Join Date: Jun 2017
Real Name: Rick
Location: SW Oklahoma
Watch: GMT, Daytona
Posts: 147
Quote:
Originally Posted by HarryLime View Post
Have them send it back to you UNTOUCHED, and then send it to a CW21 independant watchmaker!! I recommend Philip Ridley
This. Phillip will do an outstanding job.
Redtele58 is offline   Reply With Quote
Old 16 February 2019, 10:18 AM   #12
Fabrice M
2024 Pledge Member
 
Fabrice M's Avatar
 
Join Date: Nov 2014
Location: Denver
Watch: This and that...
Posts: 1,640
Ask for the watch back and send it to Watchmakers International .
Fabrice M is offline   Reply With Quote
Old 16 February 2019, 06:59 PM   #13
zapokee
"TRF" Member
 
Join Date: Sep 2012
Location: Japan
Posts: 4,342
Quote:
Originally Posted by HarryLime View Post
Have them send it back to you UNTOUCHED, and then send it to a CW21 independant watchmaker!! I recommend Philip Ridley
This. Rolex can service modern watches well, but often ruin the value of vintage pieces (whether intentially or not). Don't risk it. Send it to someone who's sympathetic about originality in vintage watch restoration.
zapokee is offline   Reply With Quote
Old 17 June 2019, 09:56 AM   #14
etp095
"TRF" Member
 
etp095's Avatar
 
Join Date: Jan 2008
Real Name: rudolph
Location: chicago burbs
Posts: 2,026
Any photos of the watch?
__________________
tt date circa 69'
5513 circa 81'
ss sub w/date (z)
pepsi gmt for dad(D)
polar expy II(z)
1675 gmt circa 68'
ladies datejust on jubilee for mom (z)
sea dweller16600(M)
SS Sub-C(g)
Omega Planet Ocean,45.5 on mesh(2500D)
etp095 is offline   Reply With Quote
Old 17 June 2019, 11:09 AM   #15
vintagewatch
"TRF" Member
 
vintagewatch's Avatar
 
Join Date: Oct 2006
Real Name: David
Location: Colorado, USA
Watch: Sport 4digit ref#
Posts: 295
In case it was not already mentioned, Rolex USA (RSC) will keep all replaced parts, and will use current service parts. Only Rolex Heritage Service in Switzerland uses era correct parts (if available), but charges huge money (and still keeps replaced parts).
vintagewatch is offline   Reply With Quote
Old 17 June 2019, 11:21 AM   #16
Verdi
"TRF" Member
 
Verdi's Avatar
 
Join Date: May 2015
Real Name: Mitch
Location: UAE
Watch: Big Ben
Posts: 2,442
Do not change anything from the optional list!!!

Do not refinish case!


Some photos would help for better advice.
__________________
IG: @watch_idiot_savant
Verdi is offline   Reply With Quote
Old 17 June 2019, 11:57 PM   #17
1watch
"TRF" Member
 
1watch's Avatar
 
Join Date: Oct 2018
Location: US
Posts: 657
Quote:
Originally Posted by HarryLime View Post
Have them send it back to you UNTOUCHED, and then send it to a CW21 independant watchmaker!! I recommend Philip Ridley


Ditto this. Crown may need replacing if tube is worn. Phillip can do this and will return original parts as well. I wouldn’t trust Rolex to do anything for fear they would polish the case and/or replace original parts and destroy the value of your watch.


Sent from my iPhone using Tapatalk
1watch is offline   Reply With Quote
Old 18 June 2019, 12:22 AM   #18
uncleluck
"TRF" Member
 
Join Date: Feb 2014
Location: England
Posts: 518
Still only 1 post from OP...

I hope this isn’t going to be one of those posts where he comes back in a few weeks (when this comes back to mind) to show off pics of his mint sub and then reads all the replies!
uncleluck is offline   Reply With Quote
Old 19 June 2019, 03:24 AM   #19
nystrand
"TRF" Member
 
Join Date: Jul 2014
Real Name: Martin
Location: Denmark, Europe
Posts: 20
Nooo really hope this piece remains intact


Sent from my iPhone using Tapatalk
nystrand is offline   Reply With Quote
Old 9 July 2019, 05:37 AM   #20
rubydog
"TRF" Member
 
Join Date: Feb 2019
Location: USA
Posts: 2
Just inherited 5513 - What next? UPDATE

Hello,

I am back. Hopefully smarter than before. Thanks for all of the feedback, and most of you will be happy to know that I have not done anything with the watch yet. RSC sent it back in the same condition it was in when I sent it to them.

A few folks have reached out recently and I apologize for not getting back to you, but for now I am keeping the watch and will most likely have some work done to maintain the "vintageness" of the watch. I have spoken to Philip Ridley and Michael Young and will most likely go this route when the time is right.

In the meantime, here are a couple of amateur pictures of the watch. Not sure why they are sideways. Any additional feedback would be appreciated.

Thanks,
Brandon
Attached Images
File Type: jpg IMG_1408.JPG (103.2 KB, 309 views)
File Type: jpg IMG_1410.JPG (110.9 KB, 305 views)
File Type: jpg IMG_1411.JPG (91.5 KB, 304 views)
File Type: jpg IMG_1412.JPG (74.4 KB, 305 views)
File Type: jpg IMG_1413.JPG (72.1 KB, 308 views)
rubydog is offline   Reply With Quote
Old 9 July 2019, 05:56 AM   #21
1665fan
"TRF" Member
 
Join Date: Oct 2017
Location: East coast
Posts: 6,583
Looks good, I would service movement with Ridley and replace crystal and keep the original crystal
1665fan is offline   Reply With Quote
Old 9 July 2019, 05:08 PM   #22
alwayshere
"TRF" Member
 
alwayshere's Avatar
 
Join Date: Jun 2013
Location: Australia
Posts: 1,502
I love these stories - people inheriting actual family heirlooms.

I don't know what i'll receive but I doubt an expensive watch in my lifetime. In fact, might end up being the giver in the future - hopefully it'll be as much pleasure as receiving one.
alwayshere is offline   Reply With Quote
Old 9 July 2019, 06:21 PM   #23
Lgear080
Banned
 
Join Date: Sep 2010
Location: NYC
Posts: 3,506
Nice watch mate. Do not send to MY. This is a piece for Bob or LAWW. Very little need be done - a sympathetic service and cleaning specifically. Please request the return of the removed parts. A nice new shaved dome top hat crystal would really compliment the dial and hands. I’d also source a new bracelet and retire the existing so you can wear without stressing yourself. The price tag will be around $2,250.00 all told, but well worth the expense.
Lgear080 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.