ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
19 March 2018, 11:25 PM | #1 |
2024 Pledge Member
Join Date: Jul 2017
Location: London
Posts: 397
|
What is the longest period between winding your watch ?
I wear my Airking every day, except for Saturday when it’s off half the day
Will it work for the next 5 years until it’s first service or is it better I wind it occasionally ? I read somewhere that automatics are more accurate if fully wound manually every so often my. Is this true ? Has anyone only ever wound their watch once when they bought it :) |
19 March 2018, 11:29 PM | #2 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
I've owned my 16610 for over 7 years now, I think I've only let the power reserve wind down a handful or less times.
I do give it a wind every week or two. Has been a great companion so far! Depending on your activity during the day it may need a wind here and there. If you're up walking around all day it should stay wound. If you sit at a desk and just walk to your car it'll need a wind.
__________________
|
19 March 2018, 11:32 PM | #3 |
"TRF" Member
Join Date: Sep 2011
Location: Florida Panhandle
Watch: Sub C LV,
Posts: 490
|
I've worn a Hulk 24-7 since 2011 and have never wound it. I just change the date on short months.
|
19 March 2018, 11:37 PM | #4 |
"TRF" Member
Join Date: Aug 2016
Location: Chicago
Watch: Daytona
Posts: 5,394
|
I have found that a couple of times my old DJ needed service because the stem would no longer thread and I couldn't tighten the crown. So on my Daytona, I have not wound it when it didn't need it, except if I open the crown to reset the time.
I haven't opened the crown in over two months and it's a grand total of four seconds fast and running great. It never stops because I have such a hard time taking it off my wrist.
__________________
Datejust w/black Tapestry dial (1985) / Daytona (2016) |
19 March 2018, 11:37 PM | #5 |
2024 Pledge Member
Join Date: Aug 2012
Real Name: Lee
Location: 42.48.45N70.48.48
Watch: What's on my wrist
Posts: 33,256
|
I believe that the average service for Rolex is about every ten years. Most don't own multiple Rolexes I also suspect. IMHO it's likely if will last ten years before servicing.
|
19 March 2018, 11:41 PM | #6 |
Banned
Join Date: May 2014
Real Name: John
Location: La Jolla, CA
Watch: Platona
Posts: 12,194
|
My Daytona - modern model - stores over 2 days of auto-wind. So I rarely wind it.
|
19 March 2018, 11:45 PM | #7 |
"TRF" Member
Join Date: Jul 2009
Real Name: Scott
Location: UK
Watch: ^^^ for now
Posts: 5,684
|
I only hand wind any of my watches when they stop. Day to day wear pretty much gives me a full power reserve so they must be fully wound with the rotor.
And I sit at a desk often. I can’t imagine how little one must move not to keep a watch running with the auto wind mechanism? Sent from my iPhone using Tapatalk
__________________
Past: 6239 (yes, I know...), 16610, 16600, 116515, 116613LN, 126600, 126711 CHNR Present: 16600, 116509, Cartier Santos Green. |
20 March 2018, 12:04 AM | #8 |
2024 Pledge Member
Join Date: Jul 2017
Location: London
Posts: 397
|
Very interesting. Looks like it doesn't need to be wound.
I presume you guys find it just as accurate after a few years with no manual winding ? |
20 March 2018, 12:09 AM | #9 |
"TRF" Member
Join Date: Nov 2010
Location: USA, UK, UAE
Posts: 668
|
I tend to give my watches about 20 winds everytime I set the time or change date.
Not for any specific reason other than habit.
__________________
ROLEX: 16570 - 16610LV - 116610LN - 116610LV - 16710 - 116710BLNR - 126710BLRO - 116622 Rhodium - 116520 Black - 116500LN White - 116500LN Black - 228206 Ice AP: 15450ST White - 15202ST Blue - 26331ST -- PP: 5711/1A Blue - 5056P-001 -- BP: 5008 1130 71S -- JLC: 3908420 -- Tudor: M79470-0001 |
20 March 2018, 12:12 AM | #10 |
"TRF" Member
Join Date: Jan 2013
Location: USA
Watch: Angelus, AP, Breit
Posts: 121
|
I wear mine every day and alternate between a Daytona, GMT II, Datejust, etc. The Daytona which sees wrist time every two days needs a wind after a week or two just to get it up to full reserve (20 turns or so). The Daytona can go two days without wear or winding easily. The GMT II can go a day and a half sitting on my desk without winding and the Datejust can last a day without winding. The watches stay on the desk at night either with crown up or flat to regulate as needed overnight as I don’t sleep with the watch on.
Sometimes a watch in rotation can sit on the desk for a day and a half before it’s back on the wrist and usually they don’t stop running in that time. Not sure what Rolex power reserve is for each watch, but I can tell you the Daytona can outlast the rest. Eventually I ended up getting watch winders for all my automatic watches and simply place it on the winder now for days and may have to wind them to full power maybe once every 2-3 weeks when/if I wear them. Some watches like a Breitling cosmonaute and Daytona seem to need more than the 650rpm on the winder if they are going to be left on there for over 2-3 weeks. My GMT II was last serviced about 4 years ago and seems to be within 4 seconds even today.... so am guessing the next service may be due in another 2-4 years.... as long as it doesn’t start to loose or gain time. Wear it in good health and wear it well and don’t worry too much about the watch - they really are built to outlast the person wearing it. |
20 March 2018, 12:15 AM | #11 |
"TRF" Member
Join Date: Jul 2009
Location: USA
Watch: 1665
Posts: 4,747
|
Only wind it 60-65 times if I put it down for more than two days and it stops. Otherwise, it runs on its own.
__________________
He could not just wear a watch. It had to be a Rolex. Ian Fleming |
20 March 2018, 12:24 AM | #12 |
2024 Pledge Member
Join Date: Jul 2017
Location: London
Posts: 397
|
|
20 March 2018, 12:53 AM | #13 |
"TRF" Member
Join Date: Sep 2013
Location: In my home.
Watch: 116660, 126600
Posts: 2,905
|
Once every two months when I have to adjust the date. I use my 116610 24/7 and extra times too.
|
20 March 2018, 02:10 AM | #14 |
2024 Pledge Member
Join Date: Nov 2012
Real Name: Steven
Location: Glocal
Posts: 19,591
|
Many, many months. Just wear it daily :)
__________________
__________________ “Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming 'Wow! What a Ride!'” -- Hunter S. Thompson Sent from my Etch A Sketch using String Theory. |
20 March 2018, 03:54 AM | #15 |
"TRF" Member
Join Date: Jan 2015
Real Name: Rollee
Location: Boston
Watch: it watching me
Posts: 1,945
|
I wind it sparingly when I change the date every couple of months
__________________
Time you enjoy wasting was not wasted |
20 March 2018, 05:24 AM | #16 |
Banned
Join Date: Mar 2018
Real Name: Mike
Location: Allison Park
Watch: 214270
Posts: 540
|
months
|
20 March 2018, 05:28 AM | #17 |
2024 Pledge Member
Join Date: Jan 2018
Location: Florida
Watch: Sub, DJ41, GMT
Posts: 7,146
|
Brand new sub. I have to wind it once every 2 weeks. When I put it on in the morning, sometimes it's not running. I don't wear it while sleeping. I didn't think this was an issue, but now I'm wondering.
|
20 March 2018, 08:15 AM | #18 |
"TRF" Member
Join Date: Mar 2012
Location: Brisbane
Watch: DSSD
Posts: 7,873
|
I never wind my watches up completely.
A few turns of the crown up to about 7 or 8 is all it takes to kick start them combined with a little bit of a gentle shake only as required if stopped due to lack of use. Just a quick start, set the time and date as required put it on and go. Literally a set and forget proposition. Unless the watch needs a service they will run for a full couple of days after wearing them a few hours. The watches obviously simply wind themselves up quite quickly when worn. |
20 March 2018, 08:16 AM | #19 |
"TRF" Member
Join Date: Mar 2012
Location: Brisbane
Watch: DSSD
Posts: 7,873
|
|
20 March 2018, 08:25 AM | #20 | |
"TRF" Member
Join Date: Mar 2012
Location: Brisbane
Watch: DSSD
Posts: 7,873
|
Quote:
That is assuming the auto wind function is working correctly. For example. When I have to re-set the date, I do it in the morning when I wake up in the morning. The watch usually sits on the bedside table over night. As an experiment I often give the watch a manual wind to gauge the state of play with it, and it typically doesn't take much more than about 5 winds of the crown to bring it up to a full wind. The bi-directional winding mechanism Rolex uses is very, very efficient. I do often wonder how much winding is required to bring the new movements up to full power given the longer power reserves |
|
20 March 2018, 08:56 AM | #21 |
"TRF" Member
Join Date: Mar 2016
Location: Abu Dhabi, UAE/AZ
Watch: Yachtmaster
Posts: 672
|
Have worn my 1680 sub daily since 1977 and have never wound it. Since getting another Rolex, keep it on a winder for 720 rotations daily.
__________________
116622 1680, 16233, 113400 retired |
20 March 2018, 09:07 AM | #22 |
"TRF" Member
Join Date: Jun 2016
Location: USA
Watch: All Rolex
Posts: 6,976
|
I have a daily Rolex rotation of 116610LN and 116520-white. Some additional that come out on rarer occasions.
I wear one until it runs out of power. Then I'll typically switch to another and wind and wear. Usually lasts a week or so if I wear daily. Both are always accurate to + or - 1 sec a day over that time |
20 March 2018, 06:55 PM | #23 | |
"TRF" Member
Join Date: Jul 2009
Real Name: Scott
Location: UK
Watch: ^^^ for now
Posts: 5,684
|
Quote:
My understand is that the auto wind mechanism in new movements is geared differently and therefore requires less rotor movement to fully wind the mainspring I’m sure I’ve read that somewhere Sent from my iPhone using Tapatalk
__________________
Past: 6239 (yes, I know...), 16610, 16600, 116515, 116613LN, 126600, 126711 CHNR Present: 16600, 116509, Cartier Santos Green. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.