My White Gold Daytona PCL v BCL

[GolfPunk]

I have gone half way .... I've simply applied very fine wire wool lightly to my bracelet to slightly 'Tone Down' the shine. They're still officially PCL but not as blingy:

[SC11]

Can understand it reasoning but that look doesn't sit well with me sorry!

Also have you damaged the bezel tachy 120-130 looks like some of the markings have been removed?

But what matters is if you like the look

[Tools]

I don't like pcl's and think the toned down bracelet is an improvement..

[irish john]

Originally Posted by SC11

Can understand it reasoning but that look doesn't sit well with me sorry!

Also have you damaged the bezel tachy 120-130 looks like some of the markings have been removed?

But what matters is if you like the look

x 2

[brettpaul]

I prefer brushed myself but would let my watchmaker handle the job for me.....looks better than with PCL IMHO!

[Bruin Watch]

So long as you like it!

It does look like you may have rubbed some of your tach tho. Hopefully you can enamel the numbers black again. Good luck!

[watchwatcher]

Well...as long as you like it, that's all that counts.

[lmcgbaj]

I like PCLs specially on a Daytona. But it's your watch.

[trackntrail]

Originally Posted by SC11

Can understand it reasoning but that look doesn't sit well with me sorry!

Also have you damaged the bezel tachy 120-130 looks like some of the markings have been removed?

But what matters is if you like the look

I like the brushed look too but I think you would have been better off letting a watchmaker handle the process for a better result.

[locutus49]

Originally Posted by oklaiss

I like the brushed look too but I think you would have been better off letting a watchmaker handle the process for a better result.

Ditto.

[Aramis9]

Maybe using scotchbrite and not wire wool would be gentler?

[thewatchguy93]

Be careful! I prefer Rolex the way they come from the factory, but as long as you like it that's all that matters. Another important thing to remember is, as reversible as this process is, you are removing a small layer of metal when polishing or brushing the surface. 18ct is particularly soft so be careful not to use to much pressure or you will loose the shape and crisp lines.



Dino

[submariner123]

Not a fan of pcl either. Too blingy.

[tkerrmd]

its your watch my friend and one of my favorites, but I like the PCL's, you need to like your watch so do as you wish!!

[GsurgBM]

Brave of you. Glad you like it.

[GolfPunk]

It is only toned down a little bit, they aren't brushed centre links now just not quite as shiny as full on PCL

[travisb]

I like the PCLs. If wanting to change it up, I'd have a trusted watchmaker handle it. Either way, you can always have it reversed.

[simongpaez]

I wouldn't mess with a PM Rolex, I love it the way it is.

[tkc324]

I like the look. Wear it in good health!

[Annan]

I brushed (not just toned down) the PCLs on my SS GMTII-C because:
1. My watch
2. My money
3. My preference
You should do the same but will get differing opinions from the good folks on TRF so it's 100% your choice in the end.

[GB-man]

Good idea but I would have a watchmaker do it. Won't cost much and the result is likely to be better if they have experience. Maybe abc watchwerks or the like.

I too dislike pcl so I like what you're doing, just would handle it differently.

[johneh]

Looks like I'm in the majority here. I think BCLs look much better, but I would've let a pro do it for me.

[HACKNSACK44]

I prefer the brush look also!

[123Blueface]

What makes you happy. That is all that counts?
Me? I would be petrified to even consider it.

[AK797]

Brushing a SS maybe but on a PM not for me, don't want to think of any gold dissolving away...

[henry333]

Brushing is fine.. This look very used or worn

[Rashid.bk]

A Daytona with no pcls is wrong and makes babies cry.

[kilyung]

PCLs are cool

[Oyster99]

makes it look more like an ss watch imo, if you like it i like it though.. i wouldnt

[pilates]

Yep thats one way to ruin a watch.