ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
10 July 2020, 10:38 PM | #1 |
"TRF" Member
Join Date: Sep 2010
Real Name: Dave
Location: NY Metro
Posts: 678
|
Winder magnitizes my watch.
Just wondering if anyone has ever heard of a watch winder magnetizing a watch.
My 16750 always runs great at +3 sec/day. I noticed last month that it was gaining 15 sec/day so I demagnetized it and it returned to +3. After some experimenting I found that after a day on my winder the watch gets magnetized again and a demagnetizing returns it to normal. Of course I am going to dump this winder (Its an inexpensive AC single winder I received as a gift) but I was just curious as to anyone hearing of this before. thanks
__________________
Rolex 15010 Date -16013 TT DJ 16610LV -16750 GMT-16600 SD 16710 GMT -Tudor 79280 |
10 July 2020, 10:42 PM | #2 |
"TRF" Member
Join Date: Sep 2015
Location: Singapore
Posts: 69
|
Is is due to the magnets in motors?
Sent from my SM-A705MN using Tapatalk |
10 July 2020, 10:44 PM | #3 |
"TRF" Member
Join Date: Mar 2011
Real Name: Michael
Location: RTP, NC, USA
Watch: ♕& Ω
Posts: 5,099
|
It kind of makes sense, since a winder works on a motor, which is nothing but an electrical coil that works based on the principles of magnetization. As I understand it.
My last winder was an Orbita, which is the only one that I know of made in the USA (in my state, actually) and it uses a different and unique method that causes the motor to run for only a few seconds every minute or so.
__________________
Enjoy life - it has an expiration date. Disclaimer: Please note that the avatar is not an accurate representation of how I look. The camera adds 10 pounds... |
10 July 2020, 11:01 PM | #4 | |
"TRF" Member
Join Date: Sep 2015
Location: Singapore
Posts: 69
|
Quote:
I better think twice to use my winders again! Sent from my SM-A705MN using Tapatalk |
|
10 July 2020, 11:14 PM | #5 |
"TRF" Member
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
|
Frankly using a winder for a relatively simple movement such as yours is more hassle than what it's worth. Well maybe not for you but personally unless I had a relatively difficult watch to set I wouldn't bother with a winder other than my own wrist and this was true even when I had over ten watches that I rotated. All were just way to easy to set and wind depending on which I chose to wear.
__________________
When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
10 July 2020, 11:19 PM | #6 | |
"TRF" Member
Join Date: Sep 2015
Location: Singapore
Posts: 69
|
Quote:
Sent from my SM-A705MN using Tapatalk |
|
10 July 2020, 11:24 PM | #7 | |
"TRF" Member
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
|
Quote:
Some may think it's a pain, but I don't see it being the end of the world or that big of a chore to me. I actually have to tie my tie and my shoe laces before going out also but yet to find a tool that does this for me automatically and yet I still manage to make it out of my house and with my pants and shirt on.
__________________
When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
|
10 July 2020, 11:44 PM | #8 | |||
"TRF" Member
Join Date: Sep 2010
Real Name: Dave
Location: NY Metro
Posts: 678
|
Quote:
Quote:
Quote:
__________________
Rolex 15010 Date -16013 TT DJ 16610LV -16750 GMT-16600 SD 16710 GMT -Tudor 79280 |
|||
10 July 2020, 11:49 PM | #9 |
Banned
Join Date: May 2020
Location: USA
Posts: 1,137
|
|
10 July 2020, 11:53 PM | #10 | |
"TRF" Member
Join Date: Sep 2010
Real Name: Dave
Location: NY Metro
Posts: 678
|
Quote:
Thank you
__________________
Rolex 15010 Date -16013 TT DJ 16610LV -16750 GMT-16600 SD 16710 GMT -Tudor 79280 |
|
11 July 2020, 03:21 AM | #11 | |
"TRF" Member
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
|
Quote:
If you don't use one, you wouldn't have these issues in the first place. The feedback one gets can sometimes be relevant, just not the answer your wanting to hear. Ask a group anything and your bound to get something you don't like to hear even if it's true. Good thing is you can still pick and chose which advice you take.
__________________
When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
|
11 July 2020, 03:32 AM | #12 |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,049
|
Motors create a magnetic field. It is the magnetic field that can magnetize small metal parts, so good winders will have their motors shielded.
You don't want to place your watch next to older electric analog clocks, or large magnetic fields that speakers generate, either.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
11 July 2020, 04:37 AM | #13 | |
Banned
Join Date: Jul 2008
Real Name: Paul
Location: San Diego
Watch: 126619LB
Posts: 21,540
|
Quote:
|
|
11 July 2020, 03:08 PM | #14 | |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Nov 2011
Location: Thousand Oaks, CA
Posts: 1,438
|
Quote:
Thanks for posting this I did not know a winder could possible magnetize. I too was given one as a gift and thought about using it someday. Something to think about. |
|
12 July 2020, 03:50 AM | #15 | |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,049
|
Quote:
I wouldn't expect there to be much influence even a few inches away, and a foot seems to be plenty unless the motor is very powerful when on. You can shield your watches from your clocks with a ferrous plate between them, to redirect the magnetic field influence.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
|
12 July 2020, 04:14 AM | #16 |
Banned
Join Date: Jun 2020
Location: Merica
Watch: All the good ones
Posts: 173
|
Another reason not to use a winder. Winders are newbie ideas no?
|
12 July 2020, 04:43 AM | #17 | |
Banned
Join Date: Jul 2008
Real Name: Paul
Location: San Diego
Watch: 126619LB
Posts: 21,540
|
Quote:
|
|
12 July 2020, 04:58 AM | #18 |
"TRF" Member
Join Date: Sep 2018
Location: United States
Watch: me buy Watches
Posts: 3,955
|
We have heard this complaint before. Must be a cheap winder.
__________________
“The display of actual intelligence terrifies much of mankind” Rolex "some" Tudor "some" Damasko "some" Misc Pieces "some" Marathon "some" GS Spring Drive "some" Hamilton "some" Findeisen "some" |
12 July 2020, 10:04 AM | #19 |
2024 Pledge Member
Join Date: Jun 2009
Real Name: Rocky
Location: Australia
Watch: Grail:Bluesy
Posts: 17,668
|
I have used a "cheap winder" for 7 years and it does not 'magnetise' the watches.
Mine have been serviced by the RSC, come back doing a consistent 3 - 5 secs/day (3 for one , 5 for the other) and that does not change until they are serviced again. I check both watches that are on the winder every day and have been logging their variation for several years. The "wear" thing is not an issue IMHO as common sense tells you that winding them all the time creates "wear" of a different type anyhow. Take your pick.
__________________
Cellini 4112. Sub 14060M. DJ 16233. Rotherhams 1847 Pocket-watch. Foundation Member of 'Horologists Anonymous' "Hi, I'm Rocky, and I'm a Horologist..." |
27 July 2020, 09:52 PM | #20 | |
"TRF" Member
Join Date: Sep 2010
Real Name: Dave
Location: NY Metro
Posts: 678
|
Quote:
I guess you get what you pay for. Thanks for all the comments/opinions. No more winders for me.
__________________
Rolex 15010 Date -16013 TT DJ 16610LV -16750 GMT-16600 SD 16710 GMT -Tudor 79280 |
|
27 July 2020, 11:23 PM | #21 |
"TRF" Member
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
|
For me personally I like hearing both Pros and Cons on most things. Generally this is the best way one can arrive at the solution that best works for you. I've often said I'm looking for the best answer not just any old answer. Details matter just as much as perspective sometimes. It's just sometimes the Cons can be a bit harder to hear.
__________________
When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
28 July 2020, 12:36 AM | #22 |
"TRF" Member
Join Date: Jun 2018
Location: East Coast
Watch: 16610
Posts: 4,933
|
I never had an issue with my winder and had it since 2010. I find my watches get magnetized when reaching into the refrigerator reaching for the milk or other items. My hand goes right by the left door magnet strip.
|
28 July 2020, 03:37 AM | #23 |
Banned
Join Date: Jul 2008
Real Name: Paul
Location: San Diego
Watch: 126619LB
Posts: 21,540
|
For what it’s worth, I use a Wolf winder, arguably the best on the market; never had any issues.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.