The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Watch Forum > Rolex & Tudor Watch Topics > Rolex General Discussion

Reply
 
Thread Tools Display Modes
Old 20 May 2017, 08:28 PM   #31
ejvette
2024 Pledge Member
 
ejvette's Avatar
 
Join Date: Apr 2014
Real Name: Ed
Location: East Hampton NY
Watch: me break clays..
Posts: 7,494
Quote:
Originally Posted by kilyung View Post
Blue threadlocker is rated up to 600*F so would require an open flame to break the bond when unscrewing it. For that reason I like to use purple Loctite which is rated to 300*F. I still use an alcohol lamp to loosen the bond. Alternatively clear nail polish is easily removed by dipping in acetone.
Using the purple Loctite can you still break the screw free with a screwdriver or do you need heat?
__________________
Rolex•Omega•Breitling•Grand Seiko

"The only difference between crazy and eccentric is the size of ones bank account" Anonymous

* Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons *
ejvette is offline   Reply With Quote
Old 20 May 2017, 08:41 PM   #32
padi56
"TRF" Life Patron
 
padi56's Avatar
 
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,117
Quote:
Originally Posted by SearChart View Post
I have to disagree, I was taught by the Rolex service centre where I did my internship to use blue Loctite on the screws. If Rolex recommends blue, it's blue.
Have to agree and thats what Rolex recommends you can use 221/222/223 they are all low strength ones and only use those no other.And to the OP use only a very very very tiny amount in the female part of the thread only.And for all on forum screws should be checked regularly for tightness.Just as they can screw in they can also screw out, with the friction bracelet link movement while on wrist.
__________________

ICom Pro3

All posts are my own opinion and my opinion only.

"The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever."
Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again.

www.mc0yad.club

Second in command CEO and left handed watch winder
padi56 is online now   Reply With Quote
Old 20 May 2017, 10:33 PM   #33
Suboc
"TRF" Member
 
Suboc's Avatar
 
Join Date: Oct 2011
Location: At my forge
Posts: 494
Suboc is offline   Reply With Quote
Old 20 May 2017, 11:54 PM   #34
Runnin' Rebel
"TRF" Member
 
Runnin' Rebel's Avatar
 
Join Date: Jan 2010
Real Name: Mark
Location: 🤔
Posts: 8,424
Quote:
Originally Posted by jinikari01 View Post
i use blue loc-tite. i run... jog... and walk before i lift.
they eventually ware off and the screws get loose or unscrewed again.
Wow

Over 16 years I've had my 16710 Coke bought new and never had a screw back out. And it's a pure tool watch and has many miles log on it. And at one point 7 straight years and worn 24/7 until I cracked crystal and off to RSC. I do keep a closer eye on all my ceramics now.
__________________
Runnin' Rebel is offline   Reply With Quote
Old 20 May 2017, 11:59 PM   #35
kilyung
2024 Pledge Member
 
kilyung's Avatar
 
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,848
Quote:
Originally Posted by ejvette View Post
I have a set of jewelers screwdrivers but my eyes are so bad for close up stuff its really hard for me to consistently get it properly on the screw head.
A simple trick is to apply clear tape over the area and poke through it with the screw driver. That'll help minimize peripheral scratches.
kilyung is offline   Reply With Quote
Old 21 May 2017, 12:04 AM   #36
kilyung
2024 Pledge Member
 
kilyung's Avatar
 
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,848
Quote:
Originally Posted by ejvette View Post
Using the purple Loctite can you still break the screw free with a screwdriver or do you need heat?
Yes, I have no problems breaking the bond mechanically with a screwdriver however I use a fine oiler to apply it to the female threads. If you apply too much then heat may be necessary.
kilyung is offline   Reply With Quote
Old 21 May 2017, 12:09 AM   #37
kilyung
2024 Pledge Member
 
kilyung's Avatar
 
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,848
Quote:
Originally Posted by jinikari01 View Post
i use blue loc-tite. i run... jog... and walk before i lift.
they eventually ware off and the screws get loose or unscrewed again.
You sure it's blue Loctite? I've been using blue Loctite for a decade on Olympic bows, watches, cars, and other applications subject to extreme vibrations (certainly more than watches will ever see) and I've never had a screw unintentionally back out.
kilyung is offline   Reply With Quote
Old 21 May 2017, 02:16 PM   #38
Jaycnyp
"TRF" Member
 
Jaycnyp's Avatar
 
Join Date: May 2014
Real Name: Jay
Location: Classified
Watch: Addict
Posts: 1,122
Quote:
Originally Posted by KrismanX View Post
I've unfortunately had this happen while riding a jet ski. Almost lost my Daytona near Daytona beach!!! Loctite is the way to go; but I have yet to get some myself.
Same thing happened to my Godfather's GMT. After that I always loctite mine now!
Jaycnyp is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.