ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
29 January 2024, 06:49 AM | #1 |
Banned
Join Date: Nov 2023
Location: NYC
Posts: 481
|
Huge dent on Deep Sea… repair options?
I was diving and wearing my couple months old basically brand new 136660 Deep Sea James Cameron… unfortunately at some point coming up on the ladder of the dive boat I hit the watch against some metal bolt on the ladder and it caused this huge dent which is quite deep.
Honestly I’m a little pissed that Rolex uses such soft steel, this should have been a scratch not a deep dent. I’m surrounded by steel in my life, on board, trucks, everywhere, and none of the industrial steel ever dents so easily. Anyways, polishing will definitely not fix this as it is too deep. I think this would require welding/soldering of extra material to fill the dent and then polish down to make it smooth? In all likelihood I won’t get this repaired and will wait 5 years until it’s servicing time to see how many other scratches and dents I get. Any advice appreciated. Sent from my iPhone using Tapatalk |
29 January 2024, 06:57 AM | #2 |
"TRF" Member
Join Date: May 2013
Real Name: Nick
Location: Las Vegas
Watch: 1601
Posts: 10,467
|
First of many. Like you said. Just leave it be until it’s time to service. There’s nothing worse than spending $500 for a laser welding only to get a scratch/dent/divot again not a week after
|
29 January 2024, 06:59 AM | #3 |
Banned
Join Date: Nov 2023
Location: NYC
Posts: 481
|
Can someone answer why Rolexes dent so easily?
My Seiko Turtle in steel has been thrashed and destroyed while diving against all sorts of metal, ladders, bolts, etc. and it only has some hairline scratches… the steel is so hard it does dent, it does the denting. Sent from my iPhone using Tapatalk |
29 January 2024, 07:01 AM | #4 |
"TRF" Member
Join Date: Apr 2015
Location: Stockholm
Watch: 15707CE
Posts: 1,986
|
Small nick, I would leave it for service.
__________________
State of the union: 5066A,15400ST,15707CE,116610LN,26470OR and a few other… |
29 January 2024, 07:18 AM | #5 |
"TRF" Member
Join Date: May 2018
Location: CA
Posts: 2,549
|
That does look like a deep ding. I personally would just leave it alone though. Glad to hear that you were using this watch for exactly what it was designed to do.....diving! I would just consider it patina and a part of the history of this watch. Also, a memory of that particular dive. The damage is on the side at least and not as noticeable or in a more irritating spot like the bezel or front of the watch.
Also, for me if I got that repaired....I think I would be more paranoid and more scared to use it each time afterwards. If you left it, we all know more dings, scratches, imperfections will come in the future and I would be totally fine with that! |
29 January 2024, 07:20 AM | #6 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Aug 2014
Location: California
Posts: 3,066
|
I have one just like that on my Sub. I would just leave it for now and assess at service time if it's still an issue to you.
|
29 January 2024, 07:49 AM | #7 |
2024 Pledge Member
Join Date: Jul 2019
Location: UK
Posts: 1,011
|
I don’t think it’s too big or looks too bad but agree you probably won’t be able to polish that out. You could laser weld that and get it looking like new again but I’d just leave until service time and decide then, especially if you plan on using it for more dives and there’s a risk it will get damaged again.
As for the ‘softness’ of the steel compared to your Seiko, I dont think there’s any difference. Whilst there are some advantages of 904L steel used by Rolex compared to the 316L steel of Seiko - such as improved corrosion resistance - the hardness of both is very much the same. |
29 January 2024, 07:53 AM | #8 | |
"TRF" Member
Join Date: Jan 2019
Location: USA
Watch: ing my wrist
Posts: 1,003
|
Quote:
|
|
29 January 2024, 07:56 AM | #9 | |
"TRF" Member
Join Date: Nov 2019
Real Name: Vincent
Location: 215
Watch: SS Sub
Posts: 1,839
|
Quote:
|
|
29 January 2024, 07:58 AM | #10 |
"TRF" Member
Join Date: Mar 2010
Location: Netherlands
Posts: 135
|
Rolex does do laserwelding at their major SC’s as far as I know here in Europe.
|
29 January 2024, 08:00 AM | #11 |
2024 Pledge Member
Join Date: Jul 2019
Location: UK
Posts: 1,011
|
|
29 January 2024, 08:15 AM | #12 | |
"TRF" Member
Join Date: Jul 2019
Real Name: rd
Location: uk
Posts: 1,445
|
Quote:
I suppose you could laser weld and polish a case with the movement still in there OP, I think your plan to live with it for now sounds reasonable. |
|
29 January 2024, 08:16 AM | #13 |
2024 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 73,997
|
I’ll say it depends ,,,, a mark like that might bother me if I couldn’t unsee it, so I’d have it repaired
I’d have to see the watch IRL. |
29 January 2024, 08:19 AM | #14 |
"TRF" Member
Join Date: Jul 2023
Location: USA
Posts: 119
|
JC is only safe in a submarine.
|
29 January 2024, 08:26 AM | #15 |
"TRF" Member
Join Date: Oct 2023
Location: USA
Posts: 123
|
The NY facility at the very least does laser welding; I believe the PA one does as well. I'm uncertain of the others. If you send the watch to an RSC, just make sure your request for laser repair is clear.
|
29 January 2024, 08:32 AM | #16 |
2024 Pledge Member
Join Date: Mar 2021
Location: USA
Posts: 304
|
That is a small dent in my opinion, you don't have to fix it right away. You can fix it when you want to service your watch.
|
29 January 2024, 08:35 AM | #17 |
Banned
Join Date: Jan 2024
Location: USA
Posts: 99
|
Thick chunky watch it’s going to get banged around doing stuff like that, nothing to do with the steel and everything to do with the person who chose to wear it. If you’re worried about it just wear the less expensive Seiko or try a slimmer Submariner. Laser welding will fix it, as others have said, just a matter of cost.
|
29 January 2024, 08:37 AM | #18 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Jun 2013
Real Name: nicholas
Location: ottawa canada
Watch: Rolex,AP,Panerai
Posts: 9,535
|
Just get it fixed. Be done with it.
Sent from my iPhone using Tapatalk |
29 January 2024, 09:04 AM | #19 |
2024 Pledge Member
Join Date: Jul 2016
Location: The Doghouse
Watch: Ingersoll Mickey
Posts: 2,880
|
I mean you wore it diving, presumably you bought it to use it. So keep using it.
|
29 January 2024, 09:08 AM | #20 |
"TRF" Member
Join Date: May 2012
Real Name: Rob
Location: Virginia
Watch: Sub/Polar/OP/BB
Posts: 4,517
|
I hear you. I put a rough dent on my Sub some years back. At the time, it wasn’t that old either, and its first major scar.
It’s been 10 years and I still haven’t fixed it. See how you feel around service time. Sent from my iPhone using Tapatalk |
29 January 2024, 09:13 AM | #21 |
"TRF" Member
Join Date: Dec 2021
Location: US
Posts: 1,938
|
The laser welding before and after photos are remarkable…like it never happened.
|
29 January 2024, 09:29 AM | #22 |
"TRF" Member
Join Date: Mar 2020
Location: UK
Posts: 592
|
its a small dent. My advice, dont think about it. There will be many more like that. It doesnt hurt the wearing experience or even the market value that much.
|
29 January 2024, 09:31 AM | #23 |
"TRF" Member
Join Date: Aug 2015
Location: Houston
Watch: SkyD, SD43, GMT2
Posts: 4,977
|
This is a wildly misleading thread title.
|
29 January 2024, 09:41 AM | #24 |
"TRF" Member
Join Date: Dec 2023
Real Name: Mike
Location: USA
Posts: 829
|
That’s a huge dent? I wouldn’t worry about it
|
29 January 2024, 09:53 AM | #25 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Jan 2018
Location: USA
Watch: Sky-Dweller
Posts: 2,443
|
Agreed. “find the dent” would have been a good title. Like Where’s Waldo. Took me a while to see the damage.
OP you obviously love the watch and we hate to hurt the things we love. From the image, that is a nothing little dent. I wouldn’t stress about it. Your deepsea will get other scars, and each scratch/dent will have a story… If you don’t like the ladder story (kind of boring), let’s say it was a shark. Tried to bite your arm off but the deepsea saved your life. And you’re brave, so you dove again the next weekend, but not without your trusty deepsea. Always with my deepsea. I like it.
__________________
Current Rotation: Explorer II 226570 White, Sky-Dweller 326934 Blue, Tudor FXD Red Bull Chrono, RPaige Wrocket Wife's Rotation: GMT-Master II 126710BLNR Jubilee, Moser Heritage Dual Time, Cartier De Santos Official Member "WIS-CON" Las Vegas International GTG 2019 |
29 January 2024, 09:57 AM | #26 |
"TRF" Member
Join Date: May 2013
Real Name: Jack
Location: The Triangle
Watch: Several
Posts: 6,635
|
Too bad about the dent, but what are you doing taking it diving???
__________________
Sub 116613 LN; GMT 116710 LN; Sinn 104R; Exp 214270; GS SBGM221; Omega AT |
29 January 2024, 09:58 AM | #27 |
"TRF" Member
Join Date: Nov 2009
Location: USA/UK
Posts: 1,289
|
thats not a huge dent in my eyes, very minor in fact. have fun with the timepiece
|
29 January 2024, 10:52 AM | #28 |
"TRF" Member
Join Date: Mar 2015
Location: USA
Posts: 1,355
|
I’d call Mike at Rolliworks. He’s your best option.
|
29 January 2024, 10:57 AM | #29 |
"TRF" Member
Join Date: Jan 2009
Location: Florida
Posts: 211
|
I would have a hard time ever worrying about that damage. It can certainly be repaired, though, if necessary.
|
29 January 2024, 11:12 AM | #30 |
"TRF" Member
Join Date: Oct 2009
Location: Socal
Posts: 4,886
|
what dent? haha
wear it, enjoy it. btw, that's a story to tell. "what happened there?" "Watch vs ladder on a boat. The ladder won."
__________________
135 ├┼┼╕ 246 R |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.