ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

7sins · 1 May 2020, 01:15 PM

Quote:

Originally Posted by pierson

wait - what version is that? 4500v in silver with a black circle?

I think it is a zurich limited edition?

eliaalsayegh · 2 May 2020, 12:04 AM

Quote:

Originally Posted by pierson

wait - what version is that? 4500v in silver with a black circle?

Zurich Edition i think 38 pcs like this

Franzl · 4 May 2020, 09:47 PM

Quote:

Originally Posted by pierson

wait - what version is that? 4500v in silver with a black circle?

As previously said, it’s the Zürich Edition limited to 38 pieces. The dial is silver with a blue ring.

bogdoc · 6 May 2020, 01:11 PM

Did anyone notice the price increase on 4500V? Wasn't following the other models' pricing.

eliaalsayegh · 6 May 2020, 11:53 PM

Quote:

Originally Posted by bogdoc

Did anyone notice the price increase on 4500V? Wasn't following the other models' pricing.

yes start from May 1 2020

C_Troy242 · 10 May 2020, 03:11 AM

Question to the OS owners, perhaps specifically the Gen3 Dual Time. I have noticed during quarantine rotating this with another watch (or none), that the power reserve doesn't really hold up to the 60 hrs. Now I thought it could be due to less movement on my part (I suppose), sitting at the desk being mostly inside the house.

However, even if I give it 40-50 spins on the crown, it takes quite a bit to get going, and I'll say it stands still after 40 hours. My AP RoC with 42 hrs off. PR feels like it usually runs longer than that and so that is how I noticed. No real information in the manual as to how far it can be wound. The Overseas crown is very smooth and easy, completely different to an AP that takes some effort to turn, whatever that says.

Not too concerned, love the piece and timekeeping as such is basically perfect - I don't really look at it much, but when I set it, it'll be about the same a day or two later. I will probably run by VC Zurich sometime in June or July when I go back to office.

What's all your experiences with that?

Bulldozer · 11 May 2020, 11:19 PM

To all you gen 3 chrono owners, do they have the same date dial as the non-chrono, font and all? I examined the non-chrono the other day, and thought the font choice was weird, and too small. It's the one thing that bothers me about this watch. Does anyone else feel the same way?

Worst case scenario -- is this something that can be replaced with a higher quality custom aftermarket date wheel someday in the future? I don't know how these things work, but figured I'd ask my stupid questions anyway in this safe space.

Nikrnic · 12 May 2020, 11:37 AM

Quote:

Originally Posted by 7sins

Wow. Exceptional. Like it better than the AP skeleton.

That is some piece of artwork!!

Sent from my SM-G970U using Tapatalk

Bulldozer · 17 May 2020, 02:02 AM

Quote:

Originally Posted by bogdoc

Did anyone notice the price increase on 4500V? Wasn't following the other models' pricing.

Quote:

Originally Posted by eliaalsayegh

yes start from May 1 2020

Can anyone tell me the 5500V MSRP before and after May 1, 2020?

LemaniaChrono · 17 May 2020, 04:53 AM

5500v was $27,300 USD.

Sent from my iPhone using Tapatalk

Bulldozer · 17 May 2020, 05:01 AM

Quote:

Originally Posted by LemaniaChrono

5500v was $27,300 USD.

Sent from my iPhone using Tapatalk

So it only went up by $1000 in 5 years after release? That's nice. Thanks.

LemaniaChrono · 17 May 2020, 05:16 AM

Quote:

Originally Posted by Bulldozer

So it only went up by $1000 in 5 years after release? That's nice. Thanks.

Yeah, $1,000 increase isn’t too bad. Found screenshots I took on my phone from the VC site from last fall. Still wish they brown dial 4500v available.

Sent from my iPhone using Tapatalk

STLrolexfan · 17 May 2020, 10:17 AM

Quote:

Originally Posted by Bulldozer

So it only went up by $1000 in 5 years after release? That's nice. Thanks.

I think the 5500V was originally priced even higher, actually, and they adjusted it down. Also, keep in mind that this is a watch you may be able to get a bit below MSRP depending on the AD, especially these days.

Sent from my iPad using Tapatalk

Cayenne06 · 29 May 2020, 03:03 AM

For those of you that own the Gen 3 Dual Time, have you had any issues? I am considering one for my next purchase but read (on another site) about a "known" problem with the movement and terrible service experiences with Richemont. The problem occurs just before midnight and noon when the AM/PM indicator is trying to switch. The entire movement locks up. Anyone had this issue?

Xeroes · 29 May 2020, 03:29 AM

Quote:

Originally Posted by Cayenne06

For those of you that own the Gen 3 Dual Time, have you had any issues? I am considering one for my next purchase but read (on another site) about a "known" problem with the movement and terrible service experiences with Richemont. The problem occurs just before midnight and noon when the AM/PM indicator is trying to switch. The entire movement locks up. Anyone had this issue?

No problem whatsoever. Beautiful watch

eliaalsayegh · 29 May 2020, 08:54 PM

Quote:

Originally Posted by Cayenne06

For those of you that own the Gen 3 Dual Time, have you had any issues? I am considering one for my next purchase but read (on another site) about a "known" problem with the movement and terrible service experiences with Richemont. The problem occurs just before midnight and noon when the AM/PM indicator is trying to switch. The entire movement locks up. Anyone had this issue?

correct, with first stock production only
and the watchmaker fixed the problem between fixed or replace with new watch

best watch i have now :)

Cayenne06 · 30 May 2020, 05:02 AM

Quote:

Originally Posted by eliaalsayegh

correct, with first stock production only
and the watchmaker fixed the problem between fixed or replace with new watch

best watch i have now :)

Thank you for your reply. I am really taken with the versatility of the Gen 3 Overseas and am considering a silver dial Dual Time (I have blue and black dials well covered in my collection).

helloworldies · 30 May 2020, 11:05 PM

No problems at all with my gen 3 dual time

eliaalsayegh · 31 May 2020, 08:42 AM

Quote:

Originally Posted by Cayenne06

Thank you for your reply. I am really taken with the versatility of the Gen 3 Overseas and am considering a silver dial Dual Time (I have blue and black dials well covered in my collection).

Go ahead perfect watch more than rolexes

eamonn345 · 2 July 2020, 05:33 PM

Sent from my iPhone using Tapatalk

Aconitase · 9 July 2020, 08:11 AM

Anyone know what size screwdriver to use for the bracelet links?
For reference Rolex oyster is 1.60 mm. That seems a little big, but I'm not sure how much bigger.

Nearest VC AD is quite far but it's closed anyhow right now :(

Bulldozer · 9 July 2020, 08:21 AM

Quote:

Originally Posted by Aconitase

Anyone know what size screwdriver to use for the bracelet links?
For reference Rolex oyster is 1.60 mm. That seems a little big, but I'm not sure how much bigger.

Nearest VC AD is quite far but it's closed anyhow right now :(

Rolex is 1.70 mm.

Aconitase · 9 July 2020, 02:13 PM

Quote:

Originally Posted by Bulldozer

Rolex is 1.70 mm.

Fair enough, you're right. I should have clarified that I was referring to standard head size.

Pouring2010 · 11 July 2020, 08:20 PM

Curious given this is a Rolex forums (as this is a dilemma I have myself)...

Do owners of both

A) use Rolex everyday and keep VC for better occasions

B) use VC everyday

C) mix it up

I have an gen 1 overseas chrono and love it... (favorite watch) But I think my Datejust 16200 is a better everyday watch....

I'm torn by not using a technically better watch (and more expensive) everyday and whether that is a waste?

Any thoughts

Thanks

Sent from my iPhone using Tapatalk

Bulldozer · 11 July 2020, 08:24 PM

Quote:

Originally Posted by Pouring2010

Curious given this is a Rolex forums (as this is a dilemma I have myself)...

Do owners of both

A) use Rolex everyday and keep VC for better occasions

B) use VC everyday

C) mix it up

I have an gen 1 overseas chrono and love it... (favorite watch) But I think my Datejust 16200 is a better everyday watch....

I'm torn by not using a technically better watch (and more expensive) everyday and whether that is a waste?

Any thoughts

Thanks

Sent from my iPhone using Tapatalk

I use all my watches every day. Scratches build character. History is what makes a watch special. Not the price.

Pouring2010 · 11 July 2020, 08:28 PM

Quote:

Originally Posted by Bulldozer

I use all my watches every day. Scratches build character. History is what makes a watch special. Not the price.

Thanks...

Sent from my iPhone using Tapatalk

Joey5622 · 11 July 2020, 08:48 PM

My VC chrono became my every day watch since I brought it home. The rubber strap just makes it so easy to wear!

Sent from my SM-N975F using Tapatalk

C_Troy242 · 11 July 2020, 10:34 PM

I have no problem wearing the VC daily. Usually no adventurous activities on the schedule, hence that may not say that much. I'd leave it off then for peace of mind.

Agree that the rubber makes it incredibly easy to wear!

Nav01L · 11 July 2020, 11:23 PM

Quote:

Originally Posted by Pouring2010

Curious given this is a Rolex forums (as this is a dilemma I have myself)...

Do owners of both

A) use Rolex everyday and keep VC for better occasions

B) use VC everyday

C) mix it up

I have an gen 1 overseas chrono and love it... (favorite watch) But I think my Datejust 16200 is a better everyday watch....

I'm torn by not using a technically better watch (and more expensive) everyday and whether that is a waste?

Any thoughts

Thanks

Sent from my iPhone using Tapatalk

Have a 116710LN and a 4500V among others. I wear the Rolex on occasion because it has sentimental value (it was my daily watch for around 8 years), but ever since I got it, the VC is my daily watch. I even take it mountaineering. Unless there’s hard sunlight or spots somewhere, the few scratches it amassed in the year I‘ve had it are close to invisible, not that they would be much of a concern to me anyway.

Pouring2010 · 11 July 2020, 11:28 PM

Thanks all...

Sent from my iPhone using Tapatalk

6 May 2020, 01:11 PM	#454
bogdoc "TRF" Member Join Date: Jan 2018 Location: USA Posts: 382	Did anyone notice the price increase on 4500V? Wasn't following the other models' pricing.

10 May 2020, 03:11 AM	#456
C_Troy242 "TRF" Member Join Date: Oct 2019 Location: Zurich Posts: 232	Question to the OS owners, perhaps specifically the Gen3 Dual Time. I have noticed during quarantine rotating this with another watch (or none), that the power reserve doesn't really hold up to the 60 hrs. Now I thought it could be due to less movement on my part (I suppose), sitting at the desk being mostly inside the house. However, even if I give it 40-50 spins on the crown, it takes quite a bit to get going, and I'll say it stands still after 40 hours. My AP RoC with 42 hrs off. PR feels like it usually runs longer than that and so that is how I noticed. No real information in the manual as to how far it can be wound. The Overseas crown is very smooth and easy, completely different to an AP that takes some effort to turn, whatever that says. Not too concerned, love the piece and timekeeping as such is basically perfect - I don't really look at it much, but when I set it, it'll be about the same a day or two later. I will probably run by VC Zurich sometime in June or July when I go back to office. What's all your experiences with that?

11 May 2020, 11:19 PM	#457
Bulldozer "TRF" Member Join Date: Mar 2009 Location: 55.8554 °N Posts: 269	To all you gen 3 chrono owners, do they have the same date dial as the non-chrono, font and all? I examined the non-chrono the other day, and thought the font choice was weird, and too small. It's the one thing that bothers me about this watch. Does anyone else feel the same way? Worst case scenario -- is this something that can be replaced with a higher quality custom aftermarket date wheel someday in the future? I don't know how these things work, but figured I'd ask my stupid questions anyway in this safe space.

17 May 2020, 04:53 AM	#460
LemaniaChrono 2024 Pledge Member Join Date: Jan 2019 Location: USA Posts: 49	5500v was $27,300 USD. Sent from my iPhone using Tapatalk

29 May 2020, 03:03 AM	#464
Cayenne06 2024 Pledge Member Join Date: Nov 2018 Location: North Carolina Watch: VC Overseas DT Posts: 134	For those of you that own the Gen 3 Dual Time, have you had any issues? I am considering one for my next purchase but read (on another site) about a "known" problem with the movement and terrible service experiences with Richemont. The problem occurs just before midnight and noon when the AM/PM indicator is trying to switch. The entire movement locks up. Anyone had this issue?

30 May 2020, 11:05 PM	#468
helloworldies "TRF" Member Join Date: Aug 2016 Location: ireland Watch: Rolex Vacheron Posts: 297	No problems at all with my gen 3 dual time

2 July 2020, 05:33 PM	#470
eamonn345 "TRF" Member Join Date: Oct 2013 Location: London Watch: AP 15400 blue dial Posts: 339	Sent from my iPhone using Tapatalk

9 July 2020, 08:11 AM	#471
Aconitase "TRF" Member Join Date: Sep 2018 Location: NJ Watch: VC, Omega, GS, MG Posts: 39	Anyone know what size screwdriver to use for the bracelet links? For reference Rolex oyster is 1.60 mm. That seems a little big, but I'm not sure how much bigger. Nearest VC AD is quite far but it's closed anyhow right now :(

11 July 2020, 08:20 PM	#474
Pouring2010 "TRF" Member Join Date: Mar 2019 Location: IE Posts: 168	Curious given this is a Rolex forums (as this is a dilemma I have myself)... Do owners of both A) use Rolex everyday and keep VC for better occasions B) use VC everyday C) mix it up I have an gen 1 overseas chrono and love it... (favorite watch) But I think my Datejust 16200 is a better everyday watch.... I'm torn by not using a technically better watch (and more expensive) everyday and whether that is a waste? Any thoughts Thanks Sent from my iPhone using Tapatalk

11 July 2020, 08:48 PM	#477
Joey5622 "TRF" Member Join Date: Sep 2019 Location: Canada Posts: 114	My VC chrono became my every day watch since I brought it home. The rubber strap just makes it so easy to wear! Sent from my SM-N975F using Tapatalk

11 July 2020, 10:34 PM	#478
C_Troy242 "TRF" Member Join Date: Oct 2019 Location: Zurich Posts: 232	I have no problem wearing the VC daily. Usually no adventurous activities on the schedule, hence that may not say that much. I'd leave it off then for peace of mind. Agree that the rubber makes it incredibly easy to wear!

11 July 2020, 11:28 PM	#480
Pouring2010 "TRF" Member Join Date: Mar 2019 Location: IE Posts: 168	Thanks all... Sent from my iPhone using Tapatalk

Currently Active Users Viewing This Thread: 4 (1 members and 3 guests)
Forcetacric