The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Watch Forum > Rolex & Tudor Watch Topics > Rolex WatchTech

Reply
 
Thread Tools Display Modes
Old 5 September 2022, 05:50 AM   #1
Pmbeld
"TRF" Member
 
Join Date: Jul 2022
Location: NYC
Posts: 6
Fixing a watch running +40

I found a great deal on a 14060, but found out it’s running +40. What does the process look like for getting this back within COSC? I’m assuming I’ll have to take the us to RSC, but will they need to replace the entire movement? Is this going to cost me thousands?
Pmbeld is offline   Reply With Quote
Old 5 September 2022, 06:23 AM   #2
Tools
TRF Moderator & 2024 DATE-JUST41 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,037
Basic service is around 700 bucks and should be able to fix almost anything. Might run a bit more if odd parts are needed.

Might just be some oil on the hairspring
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 5 September 2022, 06:35 AM   #3
Stan Cooper
2024 ROLEX DATEJUST41 Pledge Member
 
Stan Cooper's Avatar
 
Join Date: Aug 2020
Real Name: Stan Cooper
Location: Sonoma County, CA
Watch: GMT-Master II
Posts: 2,707
Magnetized balance spring?

https://www.watchclub.com/curated-by...ets-magnetised
__________________
♛16710 GMT-Master II, ♛1915 Rolex WW1 Trench Watch, Zelos Thresher 500m GMT Meteorite, Zelos Swordfish 40 200m Ti Blood Moon Meteorite, Hamilton Pilot Chronograph, Ball Roadmaster Pilot GMT COSC Chronometer, Zelos Mako 300M True GMT Meteorite
It's weird being the same age as old people.

- Stan
Stan Cooper is offline   Reply With Quote
Old 5 September 2022, 05:35 PM   #4
padi56
"TRF" Life Patron
 
padi56's Avatar
 
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,236
Quote:
Originally Posted by Pmbeld View Post
I found a great deal on a 14060, but found out it’s running +40. What does the process look like for getting this back within COSC? I’m assuming I’ll have to take the us to RSC, but will they need to replace the entire movement? Is this going to cost me thousands?
Depending on how old your 14060 is could be nothing more than simple regulation, if not serviced say over last 5-10 years then I would recommend a full RSC service, cost around $700 after service you will have a two year warranty.
__________________

ICom Pro3

All posts are my own opinion and my opinion only.

"The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever."
Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again.

www.mc0yad.club

Second in command CEO and left handed watch winder
padi56 is online now   Reply With Quote
Old 6 September 2022, 07:14 PM   #5
watchmaker
TechXpert
 
watchmaker's Avatar
 
Join Date: Feb 2009
Real Name: Scott
Location: London
Posts: 2,238
The cal.3000 in the 14060 is not a COSC tested movement, so there is no guarantee it will achieve or improve upon COSC spec.

That being said, it will be returned from service performing better than +40
watchmaker is offline   Reply With Quote
Old 8 September 2022, 01:56 AM   #6
Stan Cooper
2024 ROLEX DATEJUST41 Pledge Member
 
Stan Cooper's Avatar
 
Join Date: Aug 2020
Real Name: Stan Cooper
Location: Sonoma County, CA
Watch: GMT-Master II
Posts: 2,707
I would just add that my 16710 started running several seconds per day fast and I took it to Giovanni Passalacqua (The Independent Service Center of San Francisco) and he quickly determined that my watch was magnetized. He demagnetized it while I waited and didn't charge me for his time. It turns out that I often lay in bed propping my laptop with my left hand (wearing my watch on my left wrist) and in that position my watch is very close to one of the laptop speakers which has a permanent magnet. This apparently was/is the culprit magnetizing my watch. I bought a cheap ($15) watch demagnetizer on Amazon, and now when my watch starts gaining a few seconds a day, I demagnetize it and it immediately returns to ~+1 sec/day. Just my experience; YMMV.
__________________
♛16710 GMT-Master II, ♛1915 Rolex WW1 Trench Watch, Zelos Thresher 500m GMT Meteorite, Zelos Swordfish 40 200m Ti Blood Moon Meteorite, Hamilton Pilot Chronograph, Ball Roadmaster Pilot GMT COSC Chronometer, Zelos Mako 300M True GMT Meteorite
It's weird being the same age as old people.

- Stan
Stan Cooper is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

DavidSW Watches

Coronet

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.