ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
19 November 2013, 01:54 PM | #1 |
"TRF" Member
Join Date: Feb 2009
Real Name: Greg
Location: USA
Watch: 5514
Posts: 1,630
|
Self regulating the speedmaster
Hi all,
My speedie is running a little fast, what is the position to place it at night to slow it down a touch? Also does using the chronometer on slow the pace at all? I try to keep it fully wound. I know it will probably just need a service but until then any tips on self-regulating the movement? Thanks!
__________________
@true_patina @true.dome |
20 November 2013, 01:31 AM | #2 |
"TRF" Member
Join Date: Aug 2013
Location: Oregon
Posts: 4
|
I don't have a Speedy but do have an SMPc and several others of different makes. Each handles night time positioning differently. One loses time with the crown up, one sitting vertically with the 12 at top, another in the same position with the 6 at top, etc. Unless you have a timegrapher, the best way is to experiment. Keep a log and check your Speedy against an accurate source like time.gov or the naval observatory (http://www.usno.navy.mil/USNO/time/d...cks/simpletime) and keep a log. Since your watch may vary a bit each night, I'd try each of the six positions for a few days before coming to a conclusion. As far as winding goes, the advice I've always heard is to wind it once fully the same time every day. I wind my 6498-2 when I get up in the morning.
Letting the chronograph run may slow the watch a bit--I don't know. But it should run down the power reserve faster--I think. Have fun! |
20 November 2013, 03:06 AM | #3 |
"TRF" Member
Join Date: Oct 2012
Real Name: Paul
Location: Ontario, Canada
Posts: 307
|
Hey, Greg.
My 861 is running about +2.7 seconds per day, which is pretty good, considering it was serviced three years ago. I reset the time on November 3 and it's gained 38 seconds. I leave the watch dial up when I take it off. Dial up should gain some seconds; crown up should lose some seconds, and crown down should lose more seconds. And from what I understand, when you run the chronograph, the hands only go along for a ride on the movement, so it does use some power from the mainspring, but not too much. A Speedmaster owner on another forum did an experiment, and came up with these results: START 8/25/12 @1139. 861 with chronograph running ran for 43 hours and 14 minutes. 321 w/o chrono running is at 48hrs12min and is -2 sec. I will reverse the roles when the 321 stops. More to follow. http://forums.watchuseek.com/f20/gre...nt-740985.html Hope this helps Edited to add: I use my chrono function for about an hour in the morning, and maybe another couple of times during the day. |
20 November 2013, 02:51 PM | #4 |
"TRF" Member
Join Date: Feb 2009
Real Name: Greg
Location: USA
Watch: 5514
Posts: 1,630
|
Thanks for the info Paul!
__________________
@true_patina @true.dome |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.