ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Art161 · 6 September 2008, 08:05 AM

I kid you not. I was reading a Rolex ad (Road & Track magazine, October 2008), which explains how Rolex inscribes its scratch-proof ceramic bezel. Part of the process is "through cathodic magnetron sputtering."

I am sure this is of great comfort to those of you who have the ceramic bezel, and will encourage those of you who have the "old" bezel to immediately acquire a watch with the ceramic one.

TheVTCGuy · 6 September 2008, 08:53 AM

"through cathodic magnetron sputtering."

I had to go see the doctor when that happened to me....

NDT III · 6 September 2008, 09:27 AM

What? Do you guys think that might be a p pr pro pro blem? I d d d...............o................................. ....................................

Art161 · 6 September 2008, 09:27 AM

Quote:

Originally Posted by TheVTCGuy

"through cathodic magnetron sputtering."

I had to go see the doctor when that happened to me....

I hope that everything came out okay in the end.

Tools · 6 September 2008, 10:01 AM

Sometimes old folks do that at the restaurant..

I just cover my food with the napkin until it's safe..

astcell · 6 September 2008, 10:08 AM

I knew Rolex was an old watch but geeze....

Art161 · 6 September 2008, 10:31 AM

Quote:

Originally Posted by Tools

Sometimes old folks do that at the restaurant..

I just cover my food with the napkin until it's safe..

All hope is lost.

I thought if anyone here could explain the process, it would be Larry.

One definition of sputtering in my dictionary is to dislodge (atoms) from the surface of a material by collision with high energy particles; also to deposit a (metallic film) by such a process.

Maybe I'll drop into a local AD with the magazine advertisement and try to get an explanation that describes the process in more detail.

astcell · 6 September 2008, 10:49 AM

Quote:

Originally Posted by Art161

...
One definition of sputtering in my dictionary is to dislodge (atoms) from the surface of a material by collision with high energy particles;...:

Sounds like big words for "hit it with a hammer."

Art161 · 6 September 2008, 11:09 AM

Quote:

Originally Posted by astcell

Sounds like big words for "hit it with a hammer."

Tools · 6 September 2008, 12:37 PM

Quote:

Originally Posted by Art161

All hope is lost.

I thought if anyone here could explain the process, it would be Larry.

l:

Well, last year I did write a short post on sputter deposition of the platinum and gold used on the ceramic bezels.....but nobody understood it.........

Here is the Wiki version:

http://en.wikipedia.org/wiki/Sputter_deposition

And here is a nice Theory of Magnetron Sputtering

http://uk.geocities.com/pvd_coatings/theory.htm

Art161 · 6 September 2008, 01:23 PM

Quote:

Originally Posted by Tools

Well, last year I did write a short post on sputter deposition of the platinum and gold used on the ceramic bezels.....but nobody understood it.........

Here is the Wiki version:

http://en.wikipedia.org/wiki/Sputter_deposition

And here is a nice Theory of Magnetron Sputtering

http://uk.geocities.com/pvd_coatings/theory.htm

Thanks, Larry. The Rolex advertisement doesn't say whether or not they use an unbalanced magnetron, which apparently is better in some applications than a regular magnetron. I don't know why Rolex calls it cathodic, but I guess it has something to do with the electron charge. I guess an anode/cathode type of thing. Anyway, I have found out all I want to know about it for now. You saved me a trip to the AD.

Leighton · 6 September 2008, 01:35 PM

Quote:

Originally Posted by TheVTCGuy

"through cathodic magnetron sputtering."

I had to go see the doctor when that happened to me....

Yeah, my urologist tried to pass that diagnosis on me the other day. I told him he should be working in marketing.

Z-Sub · 6 September 2008, 01:39 PM

Quote:

Originally Posted by Leighton

Yeah, my urologist tried to pass that diagnosis on me the other day. I told him he should be working in marketing.

That was you?

Leighton · 6 September 2008, 01:47 PM

Quote:

Originally Posted by Z-Sub

That was you?

Guilty as charged!

So tell me Doc, why did you prescribe a month of Cipro?

TheVTCGuy · 6 September 2008, 06:57 PM

Quote:

Originally Posted by Leighton

Guilty as charged!

So tell me Doc, why did you prescribe a month of Cipro?

And Doc, WHY only a TWO WEEK Perscription for me? My Cathodic Magnetronic must have been sputtering worse then Leighton's

padi56 · 6 September 2008, 08:47 PM

Cathodic magnetron sputtering sounds good, big words to impress you but just Rolex speak for boswellocks IMHO.

swatty · 6 September 2008, 08:59 PM

I hope it means that the Platinum won't fall out .

airhkg · 6 September 2008, 10:15 PM

Sounds like more pure marketing B.S. and no don't like the ceramic bezel. If they make one that has a more matte (less shiny) finish I will bite but, not until then

Art161 · 7 September 2008, 04:33 AM

Now that we have the technical aspects taken care of (at least enough for me), how about one of you creative types posting a cartoon showing a little old watchmaker at Rolex doing the cathodic magnetron sputtering?

Jimbits76 · 7 September 2008, 04:37 AM

Quote:

Originally Posted by Tools

Well, last year I did write a short post on sputter deposition of the platinum and gold used on the ceramic bezels.....but nobody understood it.........

Here is the Wiki version:

http://en.wikipedia.org/wiki/Sputter_deposition

And here is a nice Theory of Magnetron Sputtering

http://uk.geocities.com/pvd_coatings/theory.htm

Hey I understood it. Atom bombardment, like when I flick peas off my dinner plate at my wife!!!!!!

J

Art161 · 7 September 2008, 04:45 AM

Quote:

Originally Posted by Jimbits76

Hey I understood it. Atom bombardment, like when I flick peas off my dinner plate at my wife!!!!!!

J

Jim, I'm not sure, but I think you have to displace one of her peas with your pea. In any event, peas on earth. Sure hope my spelling is okay today.

Tools · 7 September 2008, 08:45 AM

Quote:

Originally Posted by Art161

Jim, I'm not sure, but I think you have to displace one of her peas with your pea. In any event, peas on earth. Sure hope my spelling is okay today.

I think he's speaking of "Whirled Peas", which is a different process..

6 September 2008, 08:05 AM	#1
Art161 "TRF" Member Join Date: Jun 2008 Real Name: Art Location: San Francisco Watch: Sundial Posts: 2,266	Cathodic magnetron sputtering? I kid you not. I was reading a Rolex ad (Road & Track magazine, October 2008), which explains how Rolex inscribes its scratch-proof ceramic bezel. Part of the process is "through cathodic magnetron sputtering." I am sure this is of great comfort to those of you who have the ceramic bezel, and will encourage those of you who have the "old" bezel to immediately acquire a watch with the ceramic one. __________________ Rolex SS Oyster Perpetual no date, TT Datejust Member #13992 HM Power to the Superlative Panda, officially certified! HMPanda eats, shoots and leaves. Rolexers do it with perpetual movements.

6 September 2008, 10:01 AM	#5
Tools TRF Moderator & 2024 DATE-JUST41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,097	Sometimes old folks do that at the restaurant.. I just cover my food with the napkin until it's safe.. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

6 September 2008, 08:47 PM	#16
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 52,364	Cathodic magnetron sputtering sounds good, big words to impress you but just Rolex speak for boswellocks IMHO. __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

7 September 2008, 04:33 AM	#19
Art161 "TRF" Member Join Date: Jun 2008 Real Name: Art Location: San Francisco Watch: Sundial Posts: 2,266	Now that we have the technical aspects taken care of (at least enough for me), how about one of you creative types posting a cartoon showing a little old watchmaker at Rolex doing the cathodic magnetron sputtering? __________________ Rolex SS Oyster Perpetual no date, TT Datejust Member #13992 HM Power to the Superlative Panda, officially certified! HMPanda eats, shoots and leaves. Rolexers do it with perpetual movements.

6 September 2008, 08:53 AM	#2
TheVTCGuy Banned Join Date: Jul 2008 Real Name: Paul Location: San Diego Watch: 126619LB Posts: 21,540	"through cathodic magnetron sputtering." I had to go see the doctor when that happened to me....

6 September 2008, 09:27 AM	#3
NDT III "TRF" Member Join Date: Aug 2008 Real Name: David Location: Texas (mostly) Watch: GMT IIc Posts: 30	What? Do you guys think that might be a p pr pro pro blem? I d d d...............o................................. ....................................

6 September 2008, 10:08 AM	#6
astcell "TRF" Member Join Date: Aug 2006 Real Name: Robert Location: Angelus Oaks, CA Watch: 116713 Posts: 6,828	I knew Rolex was an old watch but geeze....

6 September 2008, 08:59 PM	#17
swatty 2024 Pledge Member Join Date: Dec 2007 Real Name: Peter Location: Sydney Watch: The Game Posts: 17,409	I hope it means that the Platinum won't fall out .

6 September 2008, 10:15 PM	#18
airhkg Member Join Date: May 2008 Location: Hong Kong Watch: Sub, SMP GMT Co-Ax Posts: 193	Sounds like more pure marketing B.S. and no don't like the ceramic bezel. If they make one that has a more matte (less shiny) finish I will bite but, not until then

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)