The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Watch Forum > Rolex & Tudor Watch Topics > Vintage Rolex Discussion

Reply
 
Thread Tools Display Modes
Old 3 April 2019, 01:56 AM   #1
SLSteve
"TRF" Member
 
Join Date: Mar 2019
Location: Netherlands
Posts: 84
Size difference white gold and engine turned 36mm bezels?

Hi, so recently I opened a thread about wanting a different bezel on my 16030. I ordered one, and when it got in it was 36mm, but the edge of the white gold bezel appears to be smaller. 4mm or so on the engine turned one, 3mm on the white gold one.

Is this correct? If I change them out now I can’t return it, so testing to see how it looks is not an option (bezel was not cheap) so I am hoping you can inform me on sizes.
SLSteve is offline   Reply With Quote
Old 3 April 2019, 05:03 AM   #2
Richard Carver
"TRF" Member
 
Richard Carver's Avatar
 
Join Date: Apr 2015
Location: US
Posts: 2,237
3mm is for a plastic 4 digit ref. It will fit your plastic 16030 as well, I don't know if the 16030 is bigger but judging from what you just said about your current one it probably is.
Richard Carver is offline   Reply With Quote
Old 3 April 2019, 07:01 AM   #3
crowncollection
"TRF" Member
 
crowncollection's Avatar
 
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,157
As above there is difference between a plastic crystal and a sapphire crystal bezel


Sent from my iPhone using Tapatalk
__________________
watches many
crowncollection is offline   Reply With Quote
Old 3 April 2019, 10:32 AM   #4
janice&fred
Banned
 
Join Date: Jul 2010
Real Name: janice
Location: St.Petersburg Fl
Watch: all of them!
Posts: 673
Quote:
Originally Posted by crowncollection View Post
As above there is difference between a plastic crystal and a sapphire crystal bezel


Sent from my iPhone using Tapatalk
from what i recall despite the differences they both will work to lock down an acrylic DJ crystal. a few of us have installed acrylic on sapphire DJ over the years.
janice&fred is offline   Reply With Quote
Old 3 April 2019, 10:59 AM   #5
crowncollection
"TRF" Member
 
crowncollection's Avatar
 
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,157
Quote:
Originally Posted by janice&fred View Post
from what i recall despite the differences they both will work to lock down an acrylic DJ crystal. a few of us have installed acrylic on sapphire DJ over the years.


Yes a sapphire crystal bezel will work on both but not the other way cheers


Sent from my iPhone using Tapatalk
__________________
watches many
crowncollection is offline   Reply With Quote
Old 3 April 2019, 01:03 PM   #6
janice&fred
Banned
 
Join Date: Jul 2010
Real Name: janice
Location: St.Petersburg Fl
Watch: all of them!
Posts: 673
Quote:
Originally Posted by crowncollection View Post
Yes a sapphire crystal bezel will work on both but not the other way cheers


Sent from my iPhone using Tapatalk
oh yea you are right on that. we have some guys here locally that attempt to install aftermarket sapphire crystals on 16xx series DJ models and they always end up goofy looking as they must elevate the crystal to clear the hands in those acrylic cases and trim the plastic gasket so the bezel will lock things down. not a good setup.
janice&fred is offline   Reply With Quote
Old 3 April 2019, 05:54 PM   #7
SLSteve
"TRF" Member
 
Join Date: Mar 2019
Location: Netherlands
Posts: 84
Quote:
Originally Posted by crowncollection View Post
As above there is difference between a plastic crystal and a sapphire crystal bezel
Ok. So is there a size difference in 4 digit dj case and 5 digit dj case or are they the same?
SLSteve is offline   Reply With Quote
Old 3 April 2019, 09:16 PM   #8
crowncollection
"TRF" Member
 
crowncollection's Avatar
 
Join Date: Jan 2011
Real Name: David
Location: australia
Posts: 20,157
Quote:
Originally Posted by SLSteve View Post
Ok. So is there a size difference in 4 digit dj case and 5 digit dj case or are they the same?


It’s not the case it is the bezel height


Sent from my iPhone using Tapatalk
__________________
watches many
crowncollection is offline   Reply With Quote
Old 8 April 2019, 08:38 PM   #9
SLSteve
"TRF" Member
 
Join Date: Mar 2019
Location: Netherlands
Posts: 84
So I am still unsure what to do. It is still not clear to me wether a 16234 whitegold bezel is indeed smaller than the 16030 engine turned one. I cannot find this anywhere on the net unfortunately so I've made some pictures in hopes to clarify things.

The size of the 18kt gold one I have is 2mm, see picture below. It is smaller than my 16030's which would be about 3mm if measured in the same way. Here is the pic for the whitegold bezel:



If I put this on my 16030, will it not leave big gaps, or is this supposed to be and if so is this also the case on other references?


Hope to hear from you guys :)
SLSteve is offline   Reply With Quote
Old 22 April 2019, 07:50 AM   #10
SLSteve
"TRF" Member
 
Join Date: Mar 2019
Location: Netherlands
Posts: 84
Ok, final update: The new bezel fits, but it makes for a much higher dome so to say. Looks fine from the front, but a sideways view will show it is not as it's supposed to be.
SLSteve is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.