ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

α-ψ! · 20 August 2011, 03:37 AM

I was wondering if it's normal that my new 312 on the left up corner , the edge is not the same sharp as the other up 3 corners!I am asking because I watched on YouTube a video which shows you how 312 is made and I saw that all the job is made by robots, so it is difficult to make mistakes(my opinion).has anybody noticed something similar on his Pam?I would calm down if I knew that this is normal and that the cases can't be 100% excellent even made from robots!!!

B. Doggy · 20 August 2011, 06:25 AM

Did you buy it used? Mine was not like you describe.

α-ψ! · 20 August 2011, 06:31 AM

Quote:

Originally Posted by B. Doggy

Did you buy it used? Mine was not like you describe.

No,new!!otherwise I wouldnt ask!!

snog · 21 August 2011, 09:58 AM

the final polish will I think be by hand so it could well have been over polished,a pic would be good,I would be taking a trip to your AD for them to look it over.

marcinthemiddle · 21 August 2011, 10:46 AM

Whoa-

Your post just made me check mine....thankfully the case is uniform, and not like you describe...

Can you post a macro -shot of the area in question? I'm curious to see what you mean...

α-ψ! · 22 August 2011, 04:11 AM

I will post soon photos

α-ψ! · 22 August 2011, 06:37 AM

Sorry about the photo but I think it shows clear what I mean!!

http://photobucket.com/albums/b478/apopsi

TonyD · 22 August 2011, 06:43 AM

I can't see it in the pics but I bet it is possible.

Even high end watches have mistakes. My Daytona had a bit of gasket lube from under the crystal fall onto the dial. My Omega Ploprof had the crown guard installed UPSIDE DOWN.

Now when I buy a new watch I look at it under a loupe for 10 minutes before I leave the store. Then I set the time and watch it for 3 days before I wear it.

Stuff happens.

α-ψ! · 22 August 2011, 06:48 AM

Quote:

Originally Posted by α-ψ!

Sorry about the photo but I think it shows clear what I mean!!

http://photobucket.com/albums/b478/apopsi

I made a mistake , check the 3 first photos that shows the case

α-ψ! · 22 August 2011, 06:52 AM

Quote:

Originally Posted by TonyD

I can't see it in the pics but I bet it is possible.

Even high end watches have mistakes. My Daytona had a bit of gasket lube from under the crystal fall onto the dial. My Omega Ploprof had the crown guard installed UPSIDE DOWN.

Now when I buy a new watch I look at it under a loupe for 10 minutes before I leave the store. Then I set the time and watch it for 3 days before I wear it.

Stuff happens.

I checked it before I buy it but it is so small and I saw it 2 days after looking it under a lamp for 20 minutes!!

snog · 22 August 2011, 09:36 AM

it could be a ding? either way I would take it to your AD to get their advice.

α-ψ! · 22 August 2011, 11:48 PM

Quote:

Originally Posted by snog

it could be a ding? either way I would take it to your AD to get their advice.

I don't think it is a ding.but I can imagine the technicals faces at the AD when I show them the problem!they will look at me like an alien

Shade · 23 August 2011, 12:22 AM

Sounds possible, but frankly its hard to tell from pictures alone..

PanosI · 23 August 2011, 12:34 AM

Here are your pics for easy preview.....

α-ψ! · 23 August 2011, 03:34 PM

I think finally going to an AD to see what can they do to the watch!

20 August 2011, 03:37 AM	#1
α-ψ! "TRF" Member Join Date: Apr 2010 Real Name: tolis Location: athens Watch: daytona tt Posts: 194	312 case question I was wondering if it's normal that my new 312 on the left up corner , the edge is not the same sharp as the other up 3 corners!I am asking because I watched on YouTube a video which shows you how 312 is made and I saw that all the job is made by robots, so it is difficult to make mistakes(my opinion).has anybody noticed something similar on his Pam?I would calm down if I knew that this is normal and that the cases can't be 100% excellent even made from robots!!!

20 August 2011, 06:25 AM	#2
B. Doggy "TRF" Member Join Date: Aug 2008 Real Name: Bryan Location: Oregon Posts: 7,399	Did you buy it used? Mine was not like you describe. __________________ Rolex / Panerai / Omega

21 August 2011, 10:46 AM	#5
marcinthemiddle Vacated Join Date: Nov 2009 Real Name: Marc Location: Connecticut Watch: PAM 111 'N' Posts: 2,558	Whoa- Your post just made me check mine....thankfully the case is uniform, and not like you describe... Can you post a macro -shot of the area in question? I'm curious to see what you mean... __________________ NAWCC Member Card Carrying Member of the Global Assoc. of Retro-Grouch-Curmudgeons Executive Dorklehead

22 August 2011, 06:43 AM	#8
TonyD 2024 Pledge Member Join Date: Jan 2008 Real Name: Tony Location: Boston North Watch: Meteorite Daytona Posts: 1,456	I can't see it in the pics but I bet it is possible. Even high end watches have mistakes. My Daytona had a bit of gasket lube from under the crystal fall onto the dial. My Omega Ploprof had the crown guard installed UPSIDE DOWN. Now when I buy a new watch I look at it under a loupe for 10 minutes before I leave the store. Then I set the time and watch it for 3 days before I wear it. Stuff happens. __________________ Pepsi GMT/SD43/DSSD Blue/ DJ41 TT Rose Diamond Dial/ Daytona Meteorite/ SS Sky Dweller White Dial/ IWC Bronze Big Pilot/ Aquanautic Super King / Omega Ploprof 1200 / Graham Scarab Diver

23 August 2011, 12:22 AM	#13
Shade "TRF" Member Join Date: Jan 2010 Real Name: Norman Location: Jakarta Watch: All of 'em.. Posts: 2,926	Sounds possible, but frankly its hard to tell from pictures alone.. __________________ My collections.. Plus PAM 233, 232, 249 & PAM 417.

21 August 2011, 09:58 AM	#4
snog "TRF" Member Join Date: Oct 2010 Location: UK Posts: 908	the final polish will I think be by hand so it could well have been over polished,a pic would be good,I would be taking a trip to your AD for them to look it over.

22 August 2011, 04:11 AM	#6
α-ψ! "TRF" Member Join Date: Apr 2010 Real Name: tolis Location: athens Watch: daytona tt Posts: 194	I will post soon photos

22 August 2011, 06:37 AM	#7
α-ψ! "TRF" Member Join Date: Apr 2010 Real Name: tolis Location: athens Watch: daytona tt Posts: 194	Sorry about the photo but I think it shows clear what I mean!! http://photobucket.com/albums/b478/apopsi

22 August 2011, 09:36 AM	#11
snog "TRF" Member Join Date: Oct 2010 Location: UK Posts: 908	it could be a ding? either way I would take it to your AD to get their advice.

23 August 2011, 12:34 AM	#14
PanosI 2024 Pledge Member Join Date: May 2008 Real Name: Panos Location: Athens, Greece Watch: 16710 Posts: 8,704	Here are your pics for easy preview.....

23 August 2011, 03:34 PM	#15
α-ψ! "TRF" Member Join Date: Apr 2010 Real Name: tolis Location: athens Watch: daytona tt Posts: 194	I think finally going to an AD to see what can they do to the watch!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)