ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
18 September 2015, 07:09 AM | #1 |
"TRF" Member
Join Date: Apr 2012
Real Name: Earl
Location: Philadelphia
Watch: PP 5170g
Posts: 162
|
Sizing the Royal Oak bracelet
How do you do it? I searched here and Google, but nothing. I removed some screws, and they don't go all the way through. Do I need to use a pin pusher also?
Sent from my iPad using Tapatalk |
18 September 2015, 07:11 AM | #2 |
"TRF" Member
Join Date: May 2015
Location: Watch Dealer atm!
Watch: all
Posts: 2,800
|
i think you need to go to a boutique or AD i believe this is one of the main complaints about the bracelet
but may be wrong though
__________________
|
18 September 2015, 08:39 AM | #3 |
2024 Pledge Member
Join Date: Mar 2014
Real Name: Clive
Location: The Alps
Watch: collections change
Posts: 6,279
|
I alter the bracelet on my 15400 regularly (add/remove 1.5 link). Are you working on the links close to the clasp?
__________________
. The path from WIShood to WISdom can have many turnings... ——————————————————————————————————— . 16803. 16570. 18038. 114300. BB58. GMW-B5000D. |
18 September 2015, 08:47 AM | #4 |
"TRF" Member
Join Date: Feb 2011
Real Name: Mike
Location: Buffalo, NY
Posts: 3,971
|
Once the screw is out, the link should separate.
|
10 November 2015, 05:18 AM | #5 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Jan 2010
Real Name: K.
Location: 780
Posts: 10,397
|
Can anyone point out the correct screwdriver size? Also, is it best to have a hollow ground screwdriver, like the ones we use to size Rolex watches?
|
10 November 2015, 09:41 AM | #6 |
2024 Pledge Member
Join Date: Feb 2010
Real Name: Neil
Location: UK
Watch: ing ships roll in
Posts: 59,267
|
Do you need two screwdrivers to remove as on the ROOs?
|
10 November 2015, 06:45 PM | #7 |
"TRF" Member
Join Date: Jul 2014
Location: Dubai
Watch: bipolar
Posts: 2,854
|
I don't get your questions :S, have you tried pulling the screw hard?
|
10 November 2015, 11:36 PM | #8 |
"TRF" Member
Join Date: Aug 2011
Real Name: Josh
Location: Lost in time
Watch: Me Nae Nae
Posts: 9,821
|
I use a typical watch screwdriver. Not sure if the size but it works perfect. Just screw and pull. Shouldn't need a second screwdriver or a push pin. I took out various links trying to find the right fit.
If a screw is tight you may need to heat it up first. Sent from my iPhone using Tapatalk
__________________
"Sometimes the songs that we hear are just songs of our own." -Jerome J. Garcia, Robert C. Hunter |
10 November 2015, 11:50 PM | #9 |
"TRF" Member
Join Date: Dec 2005
Posts: 3,670
|
You only need the screw driver with correct size. No pin pusher required. I have sized my RO few times without any problem.
|
11 November 2015, 07:56 AM | #10 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Jan 2010
Real Name: K.
Location: 780
Posts: 10,397
|
Can you share the screwdriver size (1.4mm, 1.6mm)? Also, is it better to use a hollow ground (cut out) screwdriver, like we use for Rolex screws?
|
11 November 2015, 08:30 AM | #11 |
"TRF" Member
Join Date: Mar 2014
Real Name: Steve
Location: TO CAD, HCMC VN
Watch: MP 18946
Posts: 7,292
|
You need two screwdrivers!!!
|
17 November 2015, 04:32 AM | #12 |
"TRF" Member
Join Date: Apr 2012
Real Name: Earl
Location: Philadelphia
Watch: PP 5170g
Posts: 162
|
I figured out the solution. And I have no idea why I didn't get email notifications.
No, you do not need 2 screwdrivers. You need 1 screwdriver and a Pinot needle or tiny paper clip. So, you unscrew the screw on the bracelet, and then push from the opposite side with a needle or thin item. The pin should slide right out. It's not a friction pin, it's just held in place because of the shape of the thing, and should come out freely. Sent from my iPhone using Tapatalk |
19 November 2015, 11:35 PM | #13 | |
"TRF" Member
Join Date: Aug 2011
Real Name: Josh
Location: Lost in time
Watch: Me Nae Nae
Posts: 9,821
|
Quote:
I'm curious about this... I've sized my 15400 a dozen times and I'm good to go with just a 1.4mm screwdriver. Now I know AP changed the links late in to the I serial. I have an I serial but it's the older link. I found this out from the service center when getting a 1.5 link. Is yours a newer I serial with the new link? Sent from my iPhone using Tapatalk
__________________
"Sometimes the songs that we hear are just songs of our own." -Jerome J. Garcia, Robert C. Hunter |
|
20 November 2015, 03:10 PM | #14 |
"TRF" Member
Join Date: Apr 2012
Real Name: Earl
Location: Philadelphia
Watch: PP 5170g
Posts: 162
|
Yes, exactly. My 15400 is a I serial, purchased this year.
Sent from my iPhone using Tapatalk |
20 November 2015, 11:16 PM | #15 |
Member
Join Date: Jul 2014
Real Name: Roger
Location: ...
Watch: AP/Rolex/PP
Posts: 6,309
|
I just take my APs over to my AD that I do all of my other watch business and wife's jewelry with and they take care of sizing for me no sweat while I wait--- and peruse the case for something I can't live without...
A screwdriver is a screwdriver... I don't mess with them myself -- it's just me. I know all those guys are human beings -- but I feel a little easier with them messing with it than I do!!! |
20 November 2015, 11:28 PM | #16 |
"TRF" Member
Join Date: Mar 2014
Real Name: Steve
Location: TO CAD, HCMC VN
Watch: MP 18946
Posts: 7,292
|
Yeah Neil, on the ROO I normally just remove the whole bracelet and go back and forth with other option I have, but just looked at the individual links and yeah, one screw driver is all that is needed. Was a little over zealous with my response because my mods are different than just a link.
Bracelet to case is a 2 screw driver job links that are remove able are 1. Apologies. My bracelet AP is a 2013. |
2 January 2016, 10:28 AM | #17 |
"TRF" Member
Join Date: Feb 2015
Location: England
Watch: DSSDDB
Posts: 74
|
Hi Where would I get a half link from I've looked everywhere online can you get them
Steve |
2 January 2016, 10:43 AM | #18 |
"TRF" Member
Join Date: Sep 2015
Real Name: Brandon
Location: Los Angeles, CA
Watch: Yes Please!
Posts: 6,690
|
Yeah I would take it to the AD they most likes won't charge for the sizing. Also you can probably ask them to show you how it's done.
__________________
Rolex GMT Master II 116710LN Panerai PAM 359 Audemars Piguet RO 15300OR Follow me on Instagram: @b_jakobovich |
2 January 2016, 12:46 PM | #19 |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
|
12 September 2016, 06:48 AM | #20 |
"TRF" Member
Join Date: Jan 2012
Real Name: Chris
Location: Austin
Watch: 6 digit Rolex+APRO
Posts: 1,540
|
[QUOTE=earlmale;6268839]I figured out the solution. And I have no idea why I didn't get email notifications.
No, you do not need 2 screwdrivers. You need 1 screwdriver and a Pinot needle or tiny paper clip. So, you unscrew the screw on the bracelet, and then push from the opposite side with a needle or thin item. The pin should slide right out. It's not a friction pin, it's just held in place because of the shape of the thing, and should come out freely. Thank you for posting this. I have an I series 15400 and read all the heat treat/loctite warnings so when the screws on the links came off easily but the link didn't separate, I thought I messed up. I thought I broke the screw head off because the screw is so small. You are correct, once you remove the screw, you need to remove the pin the same direction the screw came out. If you flip the watch over with the screw removed the pin might fall out, but if not a small nudge with a toothpick will push it out. |
12 September 2016, 12:59 PM | #21 |
"TRF" Member
Join Date: Apr 2010
Location: Earth
Posts: 2,406
|
It's done via screws, easiest thing in the world with the right screwdriver...
Just undo the screw, I've had 4 RO and have never had to push from the other side. |
17 April 2018, 11:58 PM | #22 |
"TRF" Member
Join Date: Apr 2010
Location: Earth
Posts: 2,406
|
I'm currently in my 4th Royal Oak and just realized the I series bracelet changed from a large screw that goes all the way through the bracelet to a tiny screw and a pin that you just push from the other side to take out...
This seems like a step back, why would they do this? Kinda like PP did with the 5711 switching from screws to push pins.
__________________
5230G / 5146G / 124060 / BB58 / '59 Constellation |
18 April 2018, 12:41 AM | #23 |
Banned
Join Date: Aug 2017
Location: Planet Earth.
Posts: 582
|
15400 and 26331 with bracelet # 1220 mine.
Order one and a half link1.5. $301 deliver. Need one screwdriver remove screw, from the oposit side push with a pin and asimetric will come out replace link reverse. |
11 July 2018, 08:48 PM | #24 | |
"TRF" Member
Join Date: Jul 2005
Real Name: Adam
Location: Philly ‘burbs
Posts: 5,633
|
Quote:
__________________
Adam |
|
12 July 2018, 04:19 AM | #25 |
"TRF" Member
Join Date: Jan 2012
Location: Boston
Posts: 223
|
i was able to size mine with just a small screwdriver. while a small pin or needle makes the process easier, if you shake and twist the bracelet the pin eventually will fall out
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.