ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

byron53 · 28 March 2014, 07:18 PM

Does anybody know what year this is from, its manual Winding.
i don´t recognice this dial.

byron53 · 29 March 2014, 07:55 AM

bump

andromeda160 · 29 March 2014, 10:23 AM

We need the SN to accurately date the watch, based on the dial and hand style I'd say 50's/early 60's

Ignorant1 · 29 March 2014, 11:12 AM

is it just me, or is it unusual for a '61(?) Oyster to have a plastic inner ring and a press fit case back ???

andromeda160 · 29 March 2014, 11:24 PM

Quote:

Originally Posted by Ignorant1

is it just me, or is it unusual for a '61(?) Oyster to have a plastic inner ring and a press fit case back ???

That's extremely strange, is that caseback really snap fit? I can't tell from the pic,
But the plastic shouldn't be in there

Cc1966 · 29 March 2014, 11:25 PM

Quote:

Originally Posted by Ignorant1

is it just me, or is it unusual for a '61(?) Oyster to have a plastic inner ring and a press fit case back ???

That plastic retaining ring is perplexing.

byron53 · 30 March 2014, 12:48 AM

some more pictures.

NukeMan · 30 March 2014, 02:16 AM

Serial number (between the lugs)?

byron53 · 30 March 2014, 02:40 AM

i dont have any serial number, its pictures from an auction site, thinking about buying it but not shure if its real, could be a fake with that plastic/rubber inner ring.

watch-guy.com · 30 March 2014, 05:38 AM

Is the case back a clip on or a screw on. The markings suggest it is an oyster style and should be a a screw in to make it water proof.

Dial is definitely redone

Julian

byron53 · 30 March 2014, 07:11 AM

I magnified the picture and it looks like a clip on, but its hard to tell. But its that plastic that puzzles me.

Mats

Tools · 30 March 2014, 10:01 AM

too fishy for me..

the last photo set is two different watches - or it only has lug holes on one side..

andromeda160 · 30 March 2014, 10:12 AM

Quote:

Originally Posted by Tools

too fishy for me..

the last photo set is two different watches - or it only has lug holes on one side..

Lug holes on one side is typical of early manual wind oysters

NukeMan · 30 March 2014, 06:14 PM

I have lug holes on the off-crown side only on my 1952. That plastic/rubber "shock resistant inner ring" does indeed look questionable and the dial looks tampered with. How much are they asking? If they cant provide pictures between the lugs I'd stay away (probably would anyway).

byron53 · 30 March 2014, 10:16 PM

They ask $600 for it.

Mats

Gaijin · 30 March 2014, 10:29 PM

I would pass.

bridgs · 31 March 2014, 05:49 AM

Quote:

Originally Posted by andromeda160

Lug holes on one side is typical of early manual wind oysters

That is so weird..

adam78 · 31 March 2014, 05:58 AM

Quote:

Originally Posted by bridgs

That is so weird..

Not at all.

byron53 · 1 April 2014, 02:03 AM

After discussion with the site they took the watch away, dont want to sell it as a origiginal Rolex

Mats

29 March 2014, 11:12 AM	#4
Ignorant1 "TRF" Member Join Date: Dec 2012 Location: run down shack Watch: Oyster Speedking Posts: 88	is it just me, or is it unusual for a '61(?) Oyster to have a plastic inner ring and a press fit case back ??? __________________ Roger 呂若

30 March 2014, 05:38 AM	#10
watch-guy.com Banned Join Date: Aug 2006 Location: United States Posts: 501	I s the case back clip in scerew in, because the markings on the case back suggest an Is the case back a clip on or a screw on. The markings suggest it is an oyster style and should be a a screw in to make it water proof. Dial is definitely redone Julian Last edited by watch-guy.com; 30 March 2014 at 05:39 AM.. Reason: mistake

30 March 2014, 10:01 AM	#12
Tools TRF Moderator & 2024 DATE-JUST41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,079	too fishy for me.. the last photo set is two different watches - or it only has lug holes on one side.. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

29 March 2014, 07:55 AM	#2
byron53 "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 7	bump

29 March 2014, 10:23 AM	#3
andromeda160 Banned Join Date: Dec 2012 Real Name: Greg Location: michigan Watch: Rolex Oyster Posts: 4,046	We need the SN to accurately date the watch, based on the dial and hand style I'd say 50's/early 60's

30 March 2014, 02:16 AM	#8
NukeMan "TRF" Member Join Date: Jan 2014 Real Name: Jonas Location: Stockholm, Sweden Posts: 988	Serial number (between the lugs)?

30 March 2014, 02:40 AM	#9
byron53 "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 7	i dont have any serial number, its pictures from an auction site, thinking about buying it but not shure if its real, could be a fake with that plastic/rubber inner ring.

30 March 2014, 07:11 AM	#11
byron53 "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 7	I magnified the picture and it looks like a clip on, but its hard to tell. But its that plastic that puzzles me. Mats

30 March 2014, 06:14 PM	#14
NukeMan "TRF" Member Join Date: Jan 2014 Real Name: Jonas Location: Stockholm, Sweden Posts: 988	I have lug holes on the off-crown side only on my 1952. That plastic/rubber "shock resistant inner ring" does indeed look questionable and the dial looks tampered with. How much are they asking? If they cant provide pictures between the lugs I'd stay away (probably would anyway).

30 March 2014, 10:16 PM	#15
byron53 "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 7	They ask $600 for it. Mats

30 March 2014, 10:29 PM	#16
Gaijin 2024 ROLEX DATEJUST41 Pledge Member Join Date: Feb 2007 Location: Japan Watch: ing your back. Posts: 16,181	I would pass.

1 April 2014, 02:03 AM	#19
byron53 "TRF" Member Join Date: Oct 2013 Location: Sweden Posts: 7	After discussion with the site they took the watch away, dont want to sell it as a origiginal Rolex Mats

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)