ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Mattcrx · 11 July 2017, 07:05 AM

Hey guys,

I have been offered a GMT 2 bracelet off a 116710 pretty cheap I was wondering if this would fit the 116610???

Thanks

bob78h · 11 July 2017, 11:47 AM

Yes it should fit, they are the same case I believe (small differences in thickness but the overall shape is the same).

Tools · 11 July 2017, 03:44 PM

Quote:

Originally Posted by Mattcrx

Hey guys,

I have been offered a GMT 2 bracelet off a 116710 pretty cheap I was wondering if this would fit the 116610???

Thanks

It will probably fit. The 116610 uses specific spring-bars that have larger diameter pivots, so you must use the 16610 spring bars or risk rounding out the lug-holes with the smaller pivots installed.

Of course, the Subc spring bars will not fit the GMTc because of this.

henrylee · 11 July 2017, 04:25 PM

You can use the bracelet but will need different types of spring bars. The sub bracelet uses 2mm thick while the GMTc has 1.8mm spring bars

Mattcrx · 11 July 2017, 06:47 PM

So if I source 1.8mm off the 16610 it would fit fine? Thanks guys!

amirdoust · 19 July 2017, 11:15 PM

I think it should fit but as henrylee mentioned, the springbars should be changed

11 July 2017, 07:05 AM	#1
Mattcrx "TRF" Member Join Date: Jan 2013 Location: Southport Posts: 32	GMT 2 bracelet on a Sub? 116610 etc Hey guys, I have been offered a GMT 2 bracelet off a 116710 pretty cheap I was wondering if this would fit the 116610??? Thanks

11 July 2017, 04:25 PM	#4
henrylee "TRF" Member Join Date: Jan 2011 Location: Socal/LA Watch: 116610LN Ceramic Posts: 3,214	You can use the bracelet but will need different types of spring bars. The sub bracelet uses 2mm thick while the GMTc has 1.8mm spring bars __________________ ♛ Sub 116610LN 2011 ♛ GMT 126710BLNR 2021 ♛ GMT 126711CHNR 2020 ♛ Datejust 16233 X-series 1993 Ω Speedmaster Mitsukoshi 2019 č Cartier Tank w5200025 2021

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11 July 2017, 11:47 AM	#2
bob78h 2024 Pledge Member Join Date: Feb 2017 Real Name: Z Location: Bay Area Watch: 126610 Posts: 314	Yes it should fit, they are the same case I believe (small differences in thickness but the overall shape is the same).

11 July 2017, 06:47 PM	#5
Mattcrx "TRF" Member Join Date: Jan 2013 Location: Southport Posts: 32	So if I source 1.8mm off the 16610 it would fit fine? Thanks guys!

19 July 2017, 11:15 PM	#6
amirdoust "TRF" Member Join Date: Mar 2017 Location: the world Watch: 116710BLNR Posts: 28	I think it should fit but as henrylee mentioned, the springbars should be changed

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)