ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

amphr1 · 22 August 2019, 08:37 AM

I just purchased a GMT Master II from a member of this forum. Now I have the task of sizing it. Do I just go to a Rolex dealership? Wouldn't it be awkward seeing I didn't buy the watch from them? But where else can I go?

DoctorA · 22 August 2019, 08:39 AM

Any AD should be able to do it. I don’t think it would be awkward! It might make them think of you with their next hot model

Ravager135 · 22 August 2019, 08:41 AM

Go into any authorized Rolex dealer. It's really none of their business where you got it. If they push you and you don't want to have a drawn out conversation, tell them you bought it on vacation.

Better yet buy the 1.6mm tool and the Loctite you need.

Nikrnic · 22 August 2019, 08:43 AM

Yah, no problem to go to an AD. You were forced to go grey anyway. A good jeweler can do it as well.

Sent from my SM-G970U using Tapatalk

maxymax · 22 August 2019, 08:45 AM

Quote:

Originally Posted by Ravager135

Go into any authorized Rolex dealer. It's really none of their business where you got it. If they push you and you don't want to have a drawn out conversation, tell them you bought it on vacation.

Better yet buy the 1.6mm tool and the Loctite you need.

This

RJRJRJ · 22 August 2019, 08:47 AM

Go to any Rolex AD. No awkwardness and they will either do it for free or charge you a small fee.

As said above, it's better to just buy the right screwdriver and do it yourself so you don't have to waste your time there and can make adjustments in the future.

t65tampa · 22 August 2019, 08:54 AM

As stated, any Rolex AD will be able to help you. If they aren't nice about it, you don't have to go back. If I were you, I'd get the proper screwdriver and Loctite and learn how to do it yourself. That will serve you well whenever you need to add or remove a link and don't want to have to go to a jeweler every time.

Sublovin · 22 August 2019, 09:01 AM

Buy a screwdriver, will be worth it

Ravager135 · 22 August 2019, 09:02 AM

I also like having my own tools because sometimes when ADs size the bracelet they leave it a little too loose or they remove a link from the wrong side making the bracelet clasp asymmetrical (which bothers me). I just prefer to do it all at home. It used to be when I would buy a new Rolex, I'd just take it home and begin the hour long process of unpacking it, taking off the stickers, sizing the bracelet my way, and storing the box the way I like. Nowadays with all the idiosyncrasies that ADs are enforcing who knows what you are allowed to do with your own purchase...

77T · 22 August 2019, 09:03 AM

My nearby watchmaker.

Sent from my iPhone using Tapatalk Pro

watchmework · 22 August 2019, 09:13 AM

My recommendation is to pick up this tool and do it yourself. I don’t trust the ADs to not butcher the screws in my bracelet, learned my lesson the hard way on a Sub.

https://www.esslinger.com/horofix-ge...djusting-tool/

darkside7 · 22 August 2019, 09:23 AM

Quote:

Originally Posted by watchmework

My recommendation is to pick up this tool and do it yourself. I don’t trust the ADs to not butcher the screws in my bracelet, learned my lesson the hard way on a Sub.

https://www.esslinger.com/horofix-ge...djusting-tool/

This is the best advice I heard in a loooong time.

Fmnunes2803 · 22 August 2019, 09:30 AM

Quote:

Originally Posted by watchmework

My recommendation is to pick up this tool and do it yourself. I don’t trust the ADs to not butcher the screws in my bracelet, learned my lesson the hard way on a Sub.

https://www.esslinger.com/horofix-ge...djusting-tool/

+1

I size my own bracelet...

rl168 · 22 August 2019, 09:35 AM

Which loctite to use? My old sea dweller came with a screwdriver so I was able to DIY, but is loctite necessary?

173rdabn · 22 August 2019, 09:45 AM

Buy the correct 1.6 mm screwdriver. Bog simple.

watchmework · 22 August 2019, 09:47 AM

Quote:

Originally Posted by rl168

Which loctite to use? My old sea dweller came with a screwdriver so I was able to DIY, but is loctite necessary?

Loctite 222 (purple)

JoseR · 22 August 2019, 10:04 AM

I got my Air King from a grey shop out of state. I needed it sized and called my local AD about sizing it and how much it would cost. The guy (forgot the name) told me to stop by the shop and ask for him. I went to next day and asked for him but he was off that day. The guy that told me he was off asked me if he could help me. I told him I called about getting the watch sized and he told me he would take care of it. Took him 5 minutes, I asked him how much and he replied no charge...it's a Rolex. He even offered me a bottle of water. I was a little surprised since I didn't purchase the watch from them but was happy with the service.

JDsnewwatch · 22 August 2019, 10:08 AM

Walk in to any upscale jewelry store and ask if they do watch link sizing (yes, they all do). Pay the 25 dollars and they will size it for you. They don't need to sell Rolexes to do this type of work. In fact, if they don't, they will actually be NICE TO YOU! Im not kidding!

RJRJRJ · 22 August 2019, 10:15 AM

Quote:

Originally Posted by rl168

Which loctite to use? My old sea dweller came with a screwdriver so I was able to DIY, but is loctite necessary?

Make sure the screwdriver is hollow ground. The loctite Rolex uses is white and I don't know what it is, but I've used 242 (blue according to the tube) and it's been fine. Do not use the red as it's intended to be semi-permanent.

Seibei · 22 August 2019, 10:17 AM

Do it yourself. Don't hand it over to some dealer who may scratch and or drop your watch.

Regularly perform a careful inspection of your watch to determine if any screws are pulling out. If so, tighten them and use the correct thread locking compound. Better safe than sorry!

HL65 · 22 August 2019, 10:18 AM

Do it yourself!

Etschell · 22 August 2019, 10:23 AM

It's pretty simple to do. But if you havent just pop into an ad.

bezler · 22 August 2019, 10:26 AM

As always, most people here have suggested the 1.6 mm screwdriver. In the past, a very few have suggested that 1.7 is the correct size, but those few are some of the most experienced and knowledgeable members here. I've always wondered about this.

Sent from my SM-J327P using Tapatalk

zaydans · 22 August 2019, 10:30 AM

AD might scratch it. Has been known to happen. Get a screwdriver set and DIY. I’m not handy at all and I’ve always adjusted my own bracelets and if I scratch it then at least it’s my own f-up not someone else.

Boaters · 22 August 2019, 11:07 AM

Buy the tools anx do it yourself .. so easy and personally I like to do it myself.

RHIII · 22 August 2019, 11:16 AM

Just about any jeweler can size it for you.

Sent from my iPhone using Tapatalk

Tha Baron · 22 August 2019, 11:18 AM

Quote:

Originally Posted by watchmework

My recommendation is to pick up this tool and do it yourself. I don’t trust the ADs to not butcher the screws in my bracelet, learned my lesson the hard way on a Sub.

https://www.esslinger.com/horofix-ge...djusting-tool/

Yes

DTap · 22 August 2019, 11:44 AM

Will that tool work for jubilee too?

frankfrazetta · 22 August 2019, 11:48 AM

On my desk. A very nice man named "me" does a great job.

watchmework · 22 August 2019, 11:50 AM

Quote:

Originally Posted by DTap

Will that tool work for jubilee too?

Yes the tool I linked from esslinger has the 1.3mm tip for jubilee and 1.7mm for the oyster bracelets...it’s an exact fit for both bracelets.

22 August 2019, 08:37 AM	#1
amphr1 2024 Pledge Member Join Date: Aug 2019 Location: El Cerrito, CA Posts: 2,095	Where to get your grey market Rolex sized? I just purchased a GMT Master II from a member of this forum. Now I have the task of sizing it. Do I just go to a Rolex dealership? Wouldn't it be awkward seeing I didn't buy the watch from them? But where else can I go?

22 August 2019, 08:39 AM	#2
DoctorA "TRF" Member Join Date: Oct 2017 Location: USA Posts: 6,523	Any AD should be able to do it. I don’t think it would be awkward! It might make them think of you with their next hot model __________________ Wear the watch you like, not the one they tell you to wear!

22 August 2019, 08:54 AM	#7
t65tampa "TRF" Member Join Date: May 2008 Location: USA Posts: 2,031	As stated, any Rolex AD will be able to help you. If they aren't nice about it, you don't have to go back. If I were you, I'd get the proper screwdriver and Loctite and learn how to do it yourself. That will serve you well whenever you need to add or remove a link and don't want to have to go to a jeweler every time. __________________ t65tampa

22 August 2019, 09:01 AM	#8
Sublovin "TRF" Member Join Date: Sep 2012 Location: USA Watch: Lots Posts: 4,354	Buy a screwdriver, will be worth it __________________ DSSD is the king of all Rolex

22 August 2019, 09:03 AM	#10
77T 2024 ROLEX DATEJUST41 Pledge Member Join Date: Dec 2010 Real Name: PaulG Location: Georgia Posts: 40,730	My nearby watchmaker. Sent from my iPhone using Tapatalk Pro __________________ Does anyone really know what time it is?

22 August 2019, 08:41 AM	#3
Ravager135 "TRF" Member Join Date: Apr 2012 Location: New Jersey Posts: 4,126	Go into any authorized Rolex dealer. It's really none of their business where you got it. If they push you and you don't want to have a drawn out conversation, tell them you bought it on vacation. Better yet buy the 1.6mm tool and the Loctite you need.

22 August 2019, 08:43 AM	#4
Nikrnic "TRF" Member Join Date: May 2017 Real Name: Louis Nick Ric Location: Michigan, USA Watch: Blnr, Expll, Subs, Posts: 10,160	Yah, no problem to go to an AD. You were forced to go grey anyway. A good jeweler can do it as well. Sent from my SM-G970U using Tapatalk

22 August 2019, 08:47 AM	#6
RJRJRJ "TRF" Member Join Date: Aug 2011 Location: USA Posts: 3,496	Go to any Rolex AD. No awkwardness and they will either do it for free or charge you a small fee. As said above, it's better to just buy the right screwdriver and do it yourself so you don't have to waste your time there and can make adjustments in the future.

22 August 2019, 09:02 AM	#9
Ravager135 "TRF" Member Join Date: Apr 2012 Location: New Jersey Posts: 4,126	I also like having my own tools because sometimes when ADs size the bracelet they leave it a little too loose or they remove a link from the wrong side making the bracelet clasp asymmetrical (which bothers me). I just prefer to do it all at home. It used to be when I would buy a new Rolex, I'd just take it home and begin the hour long process of unpacking it, taking off the stickers, sizing the bracelet my way, and storing the box the way I like. Nowadays with all the idiosyncrasies that ADs are enforcing who knows what you are allowed to do with your own purchase...

22 August 2019, 09:13 AM	#11
watchmework "TRF" Member Join Date: Jun 2017 Location: DC Watch: 126710BLRO, 116600 Posts: 7,869	My recommendation is to pick up this tool and do it yourself. I don’t trust the ADs to not butcher the screws in my bracelet, learned my lesson the hard way on a Sub. https://www.esslinger.com/horofix-ge...djusting-tool/

22 August 2019, 09:35 AM	#14
rl168 "TRF" Member Join Date: Sep 2017 Location: USA Posts: 19	Which loctite to use? My old sea dweller came with a screwdriver so I was able to DIY, but is loctite necessary?

22 August 2019, 09:45 AM	#15
173rdabn 2024 ROLEX DATEJUST41 Pledge Member Join Date: Jan 2013 Real Name: George Location: Cape Cod Watch: 216570 Explorer II Posts: 2,317	Buy the correct 1.6 mm screwdriver. Bog simple.

22 August 2019, 10:04 AM	#17
JoseR "TRF" Member Join Date: Apr 2019 Location: Philly. Watch: Air King, Omega AT Posts: 2,154	I got my Air King from a grey shop out of state. I needed it sized and called my local AD about sizing it and how much it would cost. The guy (forgot the name) told me to stop by the shop and ask for him. I went to next day and asked for him but he was off that day. The guy that told me he was off asked me if he could help me. I told him I called about getting the watch sized and he told me he would take care of it. Took him 5 minutes, I asked him how much and he replied no charge...it's a Rolex. He even offered me a bottle of water. I was a little surprised since I didn't purchase the watch from them but was happy with the service.

22 August 2019, 10:08 AM	#18
JDsnewwatch "TRF" Member Join Date: May 2019 Real Name: JD Location: NJ Watch: 116710LN with BCL Posts: 414	Walk in to any upscale jewelry store and ask if they do watch link sizing (yes, they all do). Pay the 25 dollars and they will size it for you. They don't need to sell Rolexes to do this type of work. In fact, if they don't, they will actually be NICE TO YOU! Im not kidding!

22 August 2019, 10:17 AM	#20
Seibei Banned Join Date: Mar 2018 Location: New Zealand Watch: 114060 Posts: 2,630	Do it yourself. Don't hand it over to some dealer who may scratch and or drop your watch. Regularly perform a careful inspection of your watch to determine if any screws are pulling out. If so, tighten them and use the correct thread locking compound. Better safe than sorry!

22 August 2019, 10:18 AM	#21
HL65 TRF Moderator & 2024 DATE-JUST41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,401	Do it yourself! __________________ *SPEM SUCCESSUS ALIT*

22 August 2019, 10:23 AM	#22
Etschell "TRF" Member Join Date: Dec 2013 Location: FL Watch: platinum sub Posts: 15,884	It's pretty simple to do. But if you havent just pop into an ad. __________________ If you wind it, they will run. 25 or 6 to 4.

22 August 2019, 10:26 AM	#23
bezler "TRF" Member Join Date: Jul 2018 Location: US Posts: 542	As always, most people here have suggested the 1.6 mm screwdriver. In the past, a very few have suggested that 1.7 is the correct size, but those few are some of the most experienced and knowledgeable members here. I've always wondered about this. Sent from my SM-J327P using Tapatalk __________________ .

22 August 2019, 10:30 AM	#24
zaydans "TRF" Member Join Date: Apr 2015 Real Name: Joe Location: CONUS Watch: Rolex 116710 Posts: 994	AD might scratch it. Has been known to happen. Get a screwdriver set and DIY. I’m not handy at all and I’ve always adjusted my own bracelets and if I scratch it then at least it’s my own f-up not someone else.

22 August 2019, 11:07 AM	#25
Boaters 2024 Pledge Member Join Date: May 2015 Real Name: Mike Location: Pacific Northwest Watch: 116610LV 16710 SD Posts: 10,649	Buy the tools anx do it yourself .. so easy and personally I like to do it myself.

22 August 2019, 11:16 AM	#26
RHIII Member Join Date: Jul 2014 Real Name: Roger Location: ... Watch: AP/Rolex/PP Posts: 6,309	Just about any jeweler can size it for you. Sent from my iPhone using Tapatalk

22 August 2019, 11:44 AM	#28
DTap "TRF" Member Join Date: Nov 2016 Location: Land of the Free Posts: 506	Will that tool work for jubilee too?

22 August 2019, 11:48 AM	#29
frankfrazetta "TRF" Member Join Date: Jul 2018 Location: Norman, OK Watch: SubC, Explorer II Posts: 203	On my desk. A very nice man named "me" does a great job.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)