ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

daniel76 · 18 January 2013, 10:19 PM

Hey all,

Quick question, recently had the crystal on my sub replaced by a non AD with a genuine one.

After looking at at it and a few pics of other subs the crystal to me possibly appears too low.

Granted I dont really remember that well how high it was before!

Was thinking maybe the gasket was aftermarket or too short? I know the crystal is genuine though.

Anyone have any input?

Here are pics:

Cheers,
Daniel

Furbo · 18 January 2013, 11:28 PM

If the date is displayed OK, then it's OK I'd say.

11618 · 19 January 2013, 02:41 AM

looks good to me!

daniel76 · 19 January 2013, 08:37 AM

Thanks for the reply guys, here is a date mag pic:

Cheers

daniel76 · 20 January 2013, 10:25 PM

Anyone?

Thanks

Rikki · 21 January 2013, 12:54 AM

There are 2 gaskets that fit the 295 cyclop sapphire 295-1 for dress models and 295-2 which is taller for some sport models. your subd uses a 295-2 the taller one Rik

daniel76 · 21 January 2013, 07:13 AM

Thanks for the reply rikki the C2 is 2.7mm? From the pics can you tell if it's the correct gasket?

Cheers

Rikki · 21 January 2013, 07:26 AM

It appears to be correct Rikki the difference between the 2 is .15 of a mm 2.55 vs. 2.70mm The issue is how close the hands are to the crystal if you put the wrong one on a sub I beleive the hands will hit the crystal. Rik

daniel76 · 21 January 2013, 07:27 AM

Thanks rikki

18 January 2013, 10:19 PM	#1
daniel76 "TRF" Member Join Date: Jul 2012 Location: Melbourne AUS Posts: 110	Crystal height? - Sub Date Hey all, Quick question, recently had the crystal on my sub replaced by a non AD with a genuine one. After looking at at it and a few pics of other subs the crystal to me possibly appears too low. Granted I dont really remember that well how high it was before! Was thinking maybe the gasket was aftermarket or too short? I know the crystal is genuine though. Anyone have any input? Here are pics: Cheers, Daniel

21 January 2013, 12:54 AM	#6
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	There are 2 gaskets that fit the 295 cyclop sapphire 295-1 for dress models and 295-2 which is taller for some sport models. your subd uses a 295-2 the taller one Rik __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

21 January 2013, 07:26 AM	#8
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	It appears to be correct Rikki the difference between the 2 is .15 of a mm 2.55 vs. 2.70mm The issue is how close the hands are to the crystal if you put the wrong one on a sub I beleive the hands will hit the crystal. Rik __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18 January 2013, 11:28 PM	#2
Furbo "TRF" Member Join Date: Nov 2012 Location: Slovenia, EU Watch: BLNR Posts: 1,507	If the date is displayed OK, then it's OK I'd say.

19 January 2013, 02:41 AM	#3
11618 Member Join Date: Aug 2011 Location: UK Posts: 406	looks good to me!

19 January 2013, 08:37 AM	#4
daniel76 "TRF" Member Join Date: Jul 2012 Location: Melbourne AUS Posts: 110	Thanks for the reply guys, here is a date mag pic: Cheers

20 January 2013, 10:25 PM	#5
daniel76 "TRF" Member Join Date: Jul 2012 Location: Melbourne AUS Posts: 110	Anyone? Thanks

21 January 2013, 07:13 AM	#7
daniel76 "TRF" Member Join Date: Jul 2012 Location: Melbourne AUS Posts: 110	Thanks for the reply rikki the C2 is 2.7mm? From the pics can you tell if it's the correct gasket? Cheers

21 January 2013, 07:27 AM	#9
daniel76 "TRF" Member Join Date: Jul 2012 Location: Melbourne AUS Posts: 110	Thanks rikki

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)