ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
7 December 2018, 12:36 AM | #1 |
"TRF" Member
Join Date: Apr 2018
Location: Almost in Europe
Posts: 72
|
How to swap "captured" end-links on a 7836?
Hi all,
to be totally honest, I've asked on VRF first, but given the level of engagement I'm getting (read: nil ) maybe I should have started here first :) Hi All I am learning the ropes on Rolex as my signature specifies ;) Apologies if I'm using the wrong terminology - I'm trying to get some understanding of the interchangeability of the end-links... especially as I've just purchased a fine Tudor 7836/356B to replace the Rolex-clasped 7836/380 on my snowflake. The plan was to put the 380's on the Tudor 7836, and possibly sell the other (Rolex) 7836. The issue is, the 380 links currently on the Rolex 7836 are "attached" to the bracelet via some folded "intermediary" links, which basically make the connection between the last link of the bracelet and the end-link. As said, they are even folded tight around the springbars. Net, unless there's a trick that I'm not aware of, and given that I have to left hands and do not want to risk doing something silly myself, I cannot swap end-links on my 7836's... This can only be clearer with a pic I guess. On the left you can see the 7836/380 and on the right the 7836/358B. (and in the middle another 7836 of mine with some 382's also "attached" to it) The solution to my isssue is "simple" (and expensive...) really - buy new spare 380's, fit them to the strap on the right... but I'd still like to understand what's happening here :) Can some experienced member(s) please school me on the following: 1- what is the name of that "hinge" link which keeps the end link "stuck" to the last main link of the bracelet 2- whether there's a trick to separate these 3- whether both technologies were used in parallel during the same period? Thank you, Paul |
7 December 2018, 12:47 AM | #2 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: North Florida
Posts: 16,597
|
|
7 December 2018, 01:07 AM | #3 |
"TRF" Member
Join Date: Apr 2018
Location: Almost in Europe
Posts: 72
|
Thank you - "Inner end" part it is, then
Am I understanding right that these have been replaced by standard middle-links in the late 70's? And, more importantly - is there a non-destructive trick to remove the springbar stuck in them, to retrive the end-links? Thank you for your help, Best, Paul |
7 December 2018, 01:16 AM | #4 |
"TRF" Member
Join Date: Dec 2016
Location: GMT+8
Watch: GMT 1675
Posts: 165
|
The hinged link is called the connector, I'm told. I raised a similiar question recently about my 7836 bracelet with "fixed" 280 end pieces. A good watchmaker should have the right tools to swap the connector from one 7836 bracelet with the other.
|
7 December 2018, 01:44 AM | #5 | |
"TRF" Member
Join Date: Apr 2018
Location: Almost in Europe
Posts: 72
|
Quote:
Thank you! Paul |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.