ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

timelord · 20 February 2012, 11:00 PM

Has anyone had a rolex with some pitting inside the case back lid just under the gasket/seal pass the 100 meter pressure test?

I have even seen case lids without pittings that have some fine scratches under where the gasket sits which seem to have occurred when the gaskets were removed or scraped off. Will this also affect the pressure test? Thanks in advance for any imput.

Rikki · 21 February 2012, 12:05 AM

Some cases will mild pitting will pressure test some won't luck of the draw. Rikki

20 February 2012, 11:00 PM	#1
timelord "TRF" Member Join Date: Mar 2007 Location: Margate Watch: your back Posts: 324	question about pressure test Has anyone had a rolex with some pitting inside the case back lid just under the gasket/seal pass the 100 meter pressure test? I have even seen case lids without pittings that have some fine scratches under where the gasket sits which seem to have occurred when the gaskets were removed or scraped off. Will this also affect the pressure test? Thanks in advance for any imput.

21 February 2012, 12:05 AM	#2
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	Some cases will mild pitting will pressure test some won't luck of the draw. Rikki __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)