ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

hbk75 · 25 March 2014, 01:14 PM

I got my 114060 1 month ago from the AD and he did the resizing of bracelet for me. He uses the Sinn loctite which is the 242 I supposed.

However, the AD does not clean off the old loctite using alcohol. Just removed the old screws and clean off the old loctite from the threadings on the screw pins side but not on the screw hole side.

He then dab a tiny bit of the Sinn loctite and screw them back. Is it ok if the old loctite from the screw holes are not remove totally using alcohol before re-applying the new loctite?

I try not to redo the screws because it may well strip off the screw heads. Am I good to go based on the adjustment done by the AD? Or will the screws back off just because the AD did not clean off the old loctite before re-applying the new one? Thanks everyone.

subtona · 25 March 2014, 01:26 PM

i wouldn't worry about it, it isn't ideal but is still effective.

hbk75 · 25 March 2014, 01:50 PM

Quote:

Originally Posted by subtona

i wouldn't worry about it, it isn't ideal but is still effective.

So it should hold out well. Inside the AD there are so many sales going around so I cannot imagine they clean out all the threads using alcohol prior to re-applying.

Cc1966 · 26 March 2014, 02:13 AM

You should have zero problems...enjoy your watch mate!

hbk75 · 26 March 2014, 11:40 AM

Quote:

Originally Posted by Cc1966

You should have zero problems...enjoy your watch mate!

Thanks buddy. I will go along and enjoy the watch.

strafer_kid · 9 April 2014, 10:51 PM

Reckon it should be okay - it is a good idea periodically to do a visual check of the screws and maybe ensure they are torqued down in any event. Good luck!

Whorology · 21 April 2014, 01:42 AM

Don't stress about it, it's not going to be an issue.

25 March 2014, 01:14 PM	#1
hbk75 Banned Join Date: Nov 2006 Location: Taiwan Posts: 705	Loctite on bracelets. I got my 114060 1 month ago from the AD and he did the resizing of bracelet for me. He uses the Sinn loctite which is the 242 I supposed. However, the AD does not clean off the old loctite using alcohol. Just removed the old screws and clean off the old loctite from the threadings on the screw pins side but not on the screw hole side. He then dab a tiny bit of the Sinn loctite and screw them back. Is it ok if the old loctite from the screw holes are not remove totally using alcohol before re-applying the new loctite? I try not to redo the screws because it may well strip off the screw heads. Am I good to go based on the adjustment done by the AD? Or will the screws back off just because the AD did not clean off the old loctite before re-applying the new one? Thanks everyone.

25 March 2014, 01:26 PM	#2
subtona "TRF" Member Join Date: Jan 2011 Real Name: gus Location: East Coast Watch: APK & sometimes Y Posts: 26,034	i wouldn't worry about it, it isn't ideal but is still effective. __________________

26 March 2014, 02:13 AM	#4
Cc1966 "TRF" Member Join Date: Aug 2013 Real Name: Christopher Location: Georgia, USA Watch: ing the Sea... Posts: 6,713	You should have zero problems...enjoy your watch mate! __________________ "I wish to have no Connection with any Ship that does not Sail fast for I intend to go in harm's way." Captain John Paul Jones, 16 November 1778 "*Curmudgeons* " Favorites: 1665 SD, Sub Date, DSSD, Exp II, Sub LV, GMTIIc

9 April 2014, 10:51 PM	#6
strafer_kid "TRF" Member Join Date: Oct 2009 Real Name: Kenny Location: northern ireland Watch: SDs, Subs & GMTs Posts: 5,127	Reckon it should be okay - it is a good idea periodically to do a visual check of the screws and maybe ensure they are torqued down in any event. Good luck!

21 April 2014, 01:42 AM	#7
Whorology "TRF" Member Join Date: Jul 2013 Location: Bajor Posts: 20	Don't stress about it, it's not going to be an issue.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)