ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
10 September 2019, 07:32 AM | #1 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,463
|
Triplock Crown Winding Question
My 14060 recently had a movement service, but the Triplock Crown does not wind as buttery smooth as my SubC Date, nor does it “catch” and tighten/screw down as smoothly as my other Rolex watches.
Did some forum searches, and it seems like this shouldn’t adversely affect the watch. In other words, so long as the watch winds and screws down then it shouldn’t be a major problem. Do I have this right, or should I send it in to my watch repairer to get a new OEM Triplock Crown put in? |
10 September 2019, 07:35 AM | #2 |
"TRF" Member
Join Date: Feb 2009
Real Name: Greg
Location: USA
Watch: 5514
Posts: 1,630
|
Triplock Crown Winding Question
Winding smoothness doesn’t depend on the crown so much as many other parts inside the movement... so if this feels rough that may be an issue with the movement. However threading the crown back to case is a separate issue. If this doesn’t feel right please explain a bit more as to why... it should be smooth.
Also the newer movements will feel a little less resistance when winding compared to the older ones (not while threading to case though). Inviato dal mio iPhone utilizzando Tapatalk
__________________
@true_patina @true.dome |
10 September 2019, 07:47 AM | #3 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,463
|
Thanks, Greg. Appreciate your input and follow-up. To be more precise, I think winding the watch feels ok, but certainly different and less smooth in comparison to my 2019 Submariner Date (116610LN).
For my other Rolex watches (e.g., Datejust 116234 and Submariner Date), after winding and when I go to screw back down the crown, I’ll turn slightly backwards so the thread “catches” and then I tighten clockwise until I feel slight resistance. With my 14060, the crown doesn’t “pop out” as easily when loosening from a screwed down position and it also requires a bit more force to thread and screw down in comparison to my other watches. I never get the tactile “catch” feeling of the thread on the 14060. Hope that helps. |
11 September 2019, 03:06 AM | #4 | |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,463
|
Quote:
|
|
12 September 2019, 01:59 AM | #5 |
2024 Pledge Member
Join Date: Feb 2018
Location: USA
Posts: 6,171
|
Who did the service work? Was the movement simply cleaned, reassembled and oiled or were worn parts replaced?
As Greg mentioned above, it sounds like the tube and crown might need replaced as well. He's correct in that it wouldn't affect how smoothly it winds. I suspect worn parts (reversing wheels for example) might not have been replaced. But, that's just a guess based on minimal info. |
10 January 2020, 03:43 AM | #6 | |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,463
|
Quote:
Separately, I had the watch pressure tested by a local, respected watchmaker. I also had the watchmaker check out the winding mechanism and he did a repair using genuine OEM Rolex parts. That all said, when I wind the watch it definitely feels more “stiff” or “gritty” (can’t think of better termS) compared to my other, more modern Rolex watches. This includes a a 116520, 116610, 14060M, 116234, etc. For all the others, the winding action feels smooth (“buttery” or “velvety” - again, can’t think of better words). I guess I am wondering if this sounds like an issue with my watch or something that’s par for the course for a now, 29 year old watch. P.S. Not sure if this is relevant (and an issue), but changing the time/minute hands forward is reverse from my other Rolex watches. Meaning the movement of the crown - clockwise v counter-clockwise. This always catches me a bit by surprise when I haven’t worn the 14060 in a while. Normal? Thanks! |
|
10 January 2020, 09:52 PM | #7 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,463
|
Update: Took to a local, CMW21 and Rolex Certified Watchmaker for service.
Sent from my iPhone using Tapatalk |
11 January 2020, 02:33 AM | #8 |
"TRF" Member
Join Date: Sep 2018
Location: United States
Watch: me buy Watches
Posts: 3,955
|
"Grittiness" is not a good thing. Some resistance can be felt on occasion with new seals compared to older very worn ones, but the gritty feeling . . . .
__________________
“The display of actual intelligence terrifies much of mankind” Rolex "some" Tudor "some" Damasko "some" Misc Pieces "some" Marathon "some" GS Spring Drive "some" Hamilton "some" Findeisen "some" |
13 January 2020, 08:00 AM | #9 |
TechXpert
Join Date: Feb 2009
Real Name: Scott
Location: London
Posts: 2,238
|
Just got clarification, is your watch a 14060 (as you have said) or a 14060M?
If it is the former, that has a different movement generation (30xx vs 31xx) so you’re comparing apples and oranges. If it’s the latter then there shouldn’t be a substantial difference between the two so it may indicate something isn’t quite right. |
13 January 2020, 10:03 PM | #10 | |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,260
|
Quote:
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.