ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
15 June 2016, 08:29 AM | #1 |
"TRF" Member
Join Date: Feb 2015
Location: Stratosphere
Posts: 1,990
|
Swapping bezels between a 5513 / 1680
Hey guys.
So I am having trouble mounting the bezel ring fitted on my 1680 to my 5513. I have 3 bezel rings, which all fit the 1680. But only the bezel ring that came with the 5513 will mount onto it. I have tried without the spring as well just to make sure it isnt the spring that is the issue, with no luck still. Anyone faced with a similar issue? How were you able to fix it? Thanks in advance!! |
15 June 2016, 08:54 AM | #2 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2011
Location: RedSox Nation
Watch: U Talkn Bout Wilis
Posts: 5,425
|
Keep in mind the bezels and retaining rings wore together over time and may inhibit quick swapping.
I have a few that are like that.
__________________
I'm a sailor peg. And I've lost my leg. Climbing up the top sails. I've lost my leg! |
15 June 2016, 09:54 AM | #3 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 40,714
|
I suppose this might seem like a stupid question, but are you certain the 2 that won't swap are genuine?
__________________
Does anyone really know what time it is? |
15 June 2016, 10:59 PM | #4 |
"TRF" Member
Join Date: Aug 2012
Location: Switzerland
Posts: 14,293
|
Should work - try pressing it against the edge of a table.
__________________
|
16 June 2016, 05:22 AM | #5 |
"TRF" Member
Join Date: Dec 2008
Location: Boston
Posts: 862
|
Why when you get a new bezel rolex typically replaces the retaining ring.
At one time I owned a 5513, 1680, 9401, 9411, 7016. The 9411 and the 7016 bezels could be swapped (the 7016 was from 68, the 9411 was 73) but wouldn't fit on the 9401, 5513 or the 1680. The 1680, 9401 and 5513 could be swapped amongst themselves but some weren't quite as tight as they should be and all 3 were too big for the 9411 and 7016.
__________________
Formerly John in SC and John in TN How To: Remove a Tudor Pelagos Endlink in 60 Seconds or Less |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.