ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
6 March 2009, 09:10 AM | #1 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Noise from watch...
So just the other day I was commenting (to myself) that my Rolex was silent when it was shaken, and a nice Seiko 5, and my Seiko Kinetic made a noise when shaken. In both the Seiko's it's the rotor turning you can hear.
Well.....I just noticed that my Rolex now has noise when I shake it or shake my wrist. It's not real loud, but you can hear it. It's a high pitched "tick" almost sounds like something hitting the inside of the case or case back. Watch was last serviced in 2004 and is a daily worn watch (not to mention vintage). First, is this normal and I just didn't notice it before? and second, what might it be if it's not normal? Since it's getting close for a service, it might be time. The serial number was hard to read, but from what I can tell it dates to 1977 5500 model Air King.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
6 March 2009, 12:49 PM | #2 |
2024 Pledge Member
Join Date: Jun 2008
Location: So Cal, USA
Watch: Not a ONEWatch Man
Posts: 7,383
|
It's normal to hear the ticks.
for Daytona, you'll hear a swirling sound.
__________________
SS Submariner Date "Z" SS SeaDweller "D" SS Submariner "Random" TT Blue Submariner "P" SS GMT-Master ll "M", Pepsi Pam 311, 524, 297 |
7 March 2009, 01:07 AM | #3 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Thanks for the reply! It's still working fine, so I not going to worry about it for now.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
7 March 2009, 01:23 AM | #4 |
TechXpert & 2016 Patron
Join Date: Aug 2007
Location: Mx
Posts: 1,572
|
No no no, take it in for service ASAP! It is most likely the rotor axle that's either worn, bent or broken and that is now causing the rotor to touch the other metal in you watch, scraping away and developing metal dust! That dust in return will cut away on all the other gears, and basicly destroy everything inside! Please take it to a watchmaker!
__________________
Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA |
7 March 2009, 03:48 AM | #5 | |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Quote:
Wow, OK that changes things! I had thought about sending to the folks over at QualityTyme.net. They advertise a overhaul for $395.00. There were several people at TRF that said they were OK. Unless someone can recommend someone local to the Charlotte, NC area or someone with a better deal than 395.00 and recommended.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
|
7 March 2009, 07:02 AM | #6 | |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Quote:
After looking at the serial # again, it looks like I was off by a few years on it's age. 345XXXX dates it to 1971. I called a local shop in Charlotte and they wanted $675.00 for a basic overhaul. That sounded high to me. I was nice and thanked them for the info. Sounds like they do good work, and the lady was very knowledgeable of what they do. Looks like I'll call QualityTyme. Man I hate to send this watch off...I just got if from my Dad....
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
|
7 March 2009, 11:23 AM | #7 | |
2024 Pledge Member
Join Date: Jun 2008
Location: So Cal, USA
Watch: Not a ONEWatch Man
Posts: 7,383
|
Quote:
Vanessa, I know you're a professional and have no intention to challenge your opinion. However, everyone of my Rolex including new in box had a little clicking sounds when watch is shaken. I don't think all of them are broken?? In addition, I've sent several of them to Rolex for regulation or service and all came back the same way. So maybe we're talking about different noises?
__________________
SS Submariner Date "Z" SS SeaDweller "D" SS Submariner "Random" TT Blue Submariner "P" SS GMT-Master ll "M", Pepsi Pam 311, 524, 297 |
|
7 March 2009, 11:27 AM | #8 |
"TRF" Member
Join Date: Feb 2009
Real Name: Jarrett
Location: San Antonio TX
Watch: ing everybody
Posts: 1,515
|
Mine has the clicking noise also, but its just the SS bracelet knocking around into each other.
|
7 March 2009, 11:59 AM | #9 |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,037
|
The poster has stated that his watch did not make any noise at all until recently......
I agree with Vanessa, the rotor axle is the weak point on a Rolex, and many that are not serviced routinely wear at the axle causing the self-wind counter weight to wobble when it spins and "nick" the back of the movement at the low point... This is extremely common and can easily be checked by opening the back and looking to see if any marks show from where the metal to metal contact has been made.. Here is a worn axle.........the red stuff is metal dust (ground metal) the the groove at the small end is where the bushing has dug into the smooth surface from lack of lulbrication.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
7 March 2009, 12:54 PM | #10 | |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Quote:
For those that know, is this rotor axle usually covered in the standard overhaul or is it one of those extra costs?
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
|
7 March 2009, 01:07 PM | #11 |
2024 Pledge Member
Join Date: Jun 2008
Location: So Cal, USA
Watch: Not a ONEWatch Man
Posts: 7,383
|
Please let us know what RSC find.
__________________
SS Submariner Date "Z" SS SeaDweller "D" SS Submariner "Random" TT Blue Submariner "P" SS GMT-Master ll "M", Pepsi Pam 311, 524, 297 |
7 March 2009, 03:25 PM | #12 |
"TRF" Member
Join Date: Jan 2009
Real Name: Russel
Location: N/A
Watch: N/A
Posts: 755
|
I once dropped my Rolex on the floor and about a couple of days later, I noticed that the power reserve was low. The watch was also making a sound as if something was hitting the back of the case. It actually was as I could feel each bump go through. I took it to Rolex for a service, it was obvious that the rotor had become loose due to the inability to wind correctly.
I did notice something a couple of months back too. The watch does make the same sound. In fact, I took my watch in to the RSC and the watch maker didn't notice anything. Anyhows, looks like you are already putting it in for a look. Let us know what they find. |
8 March 2009, 06:07 AM | #13 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
I'll post the results, as I just sent her off...
I'm sporting the Timex till she gets back, because my Seiko needs some work too
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
9 March 2009, 01:56 PM | #14 | |
TechXpert & 2016 Patron
Join Date: Aug 2007
Location: Mx
Posts: 1,572
|
Quote:
But don't pay more than $600, coz that's the approximate charge when you send it to a RSC. Good luck!
__________________
Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA |
|
9 March 2009, 01:58 PM | #15 | |
Banned
Join Date: Oct 2008
Real Name: Greg Dolley
Location: Los Angeles
Watch: Rose Gold Daytona
Posts: 1,283
|
Quote:
However, on my DJ, it took a much more forceful shake to make the sound when it was brand new. After a few months, it took less force. Also when it was new, it took a lot more movement of my wrist to keep the power reserve up - so much so, that it'd sometimes stop at night when I was sleeping. Now the problem doesn't happen. I don't think it's coincidence. I believe that my DJ was sitting on my AD's shelf for at least a year before I bought it (according to the serial #) and because of this, maybe the lubrication needed some time to "break-in." These noises are different from a "grinding" sound which I hear from my very old Tudor (I don't know its original year, but based on stuff I've read from this forum, I suspect that it's from 1969). I agree with Vanessa that this is most likely the rotor grinding against the inside of the case. I'm not the original owner of the Tudor, however I know that it has never been serviced - so this makes sense. -Greg |
|
26 March 2009, 10:21 AM | #16 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Just an update (No update really). Still no word from the Watchmaker. They have had it 2 weeks now, and I am almost sure they are in Basel now, considering I sent it to John Brozek (He wont miss that show). He said to expect a call hopefully this week to give me the report on it and the cost. I am really missing my watch!
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
26 March 2009, 11:59 AM | #17 |
Member
Join Date: Aug 2008
Real Name: Jeannie
Location: North Carolina
Posts: 533
|
Just so long as you can tell when it's 9:57 Thursday night. I think we have a date with 'nova.
Gonna give us a hard time. Our team doesn't do well against teams with quick, athletic guards. Jeannie |
31 March 2009, 01:13 AM | #18 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
OK I got the damage report today. OUCH!!!
It needs a new tube and crown, new rotor axle, and several gears. In addition to a complete overhaul/service. There were metal shavings everywhere. The pinging I started hearing was indeed the Rotor hitting the caseback and movement. The repair cost was a little more than I expected, but it's getting fixed. Hopefully I'll have it back in a few weeks.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
31 March 2009, 07:13 PM | #19 |
"TRF" Member
Join Date: Dec 2008
Real Name: Brett
Location: leeds,uk
Watch: BLUE ARAB DAYTONA
Posts: 691
|
sorry if this is cheeky but how much is it costing you?
dont have to answer if you dont wish |
1 April 2009, 01:47 AM | #20 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Well this will be a good discussion, Maybe Tools or Vanessa will chime in on this one.
When a watch is sent in to RSC for an overhaul, from what I have described, does it sound to be within the normal of items that would be covered in their standard overhaul price? I think their standard price is $600 correct? If that is the case, I am paying a little more than if I would had sent it to Rolex. If not, I may be getting out cheaper. All parts that are being replaced are 100% Rolex, he doesn't use aftermarket. My watch is getting close if not already over the age RSC work on (71-72 year). So RSC may not have been an option anyway. My repair bill was $691.00 and I have to pay for shipping back so it's a little more than that actually.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
1 April 2009, 02:25 AM | #21 |
2024 Pledge Member
Join Date: Aug 2008
Posts: 5,430
|
Mine makes the same noise and IT IS NORMAL. My watch is a Z serial and was recently seen by a watchmaker at the local AD.
|
1 April 2009, 03:10 AM | #22 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
I assume you didn't read the entire thread. It's not normal, there was damage to my movement. When it sounds like BB's inside the watch movement it's not normal.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
1 April 2009, 10:49 AM | #23 |
TRF Moderator & DATE-JUST41 2024 Patron
Join Date: Oct 2005
Location: .
Watch: 126610LN
Posts: 35,357
|
A service from an RSC costs $555. That includes a bezel insert also
__________________
JJ |
1 April 2009, 11:22 AM | #24 | |
Member
Join Date: Feb 2009
Real Name: Danny
Location: Ca
Watch: 116710LN
Posts: 936
|
Quote:
Curious though have you had it fixed? If so what was wrong? And for future reference neither my 1570 movement or 3186 movement make a noise. |
|
1 April 2009, 12:32 PM | #25 | |
Banned
Join Date: Oct 2008
Real Name: Greg Dolley
Location: Los Angeles
Watch: Rose Gold Daytona
Posts: 1,283
|
Quote:
"It needs a new tube and crown, new rotor axle, and several gears. In addition to a complete overhaul/service. There were metal shavings everywhere. The pinging I started hearing was indeed the Rotor hitting the caseback and movement. The repair cost was a little more than I expected, but it's getting fixed. Hopefully I'll have it back in a few weeks. " |
|
14 April 2009, 02:30 AM | #26 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
Update: I should have it back tomorrow (Unless I miss the FedEx truck). I'll post some pic's if it's worthy
Thanks to all for the response on the issue. I am glad I sent it in, otherwise I may have caused more damage.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
15 April 2009, 03:33 AM | #27 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
It's back and it looks pretty good for a 37 year old watch!
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
15 April 2009, 03:55 AM | #28 |
Member
Join Date: Mar 2009
Real Name: Warren
Location: Arizona
Watch: Air King
Posts: 205
|
Beautiful!!
|
17 April 2009, 11:31 PM | #29 |
"TRF" Member
Join Date: Feb 2009
Location: Pittsburgh Pa
Posts: 12
|
The watch looks great, is it keeping accurate time?
|
18 April 2009, 12:36 AM | #30 |
"TRF" Member
Join Date: Dec 2008
Real Name: Chris
Location: North Carolina
Watch: 72' Rolex Air King
Posts: 421
|
I've only had it back a few days, and so far it's prett good. It was running 1 min fast per day before, and it's far less than that now. I have been wearing it since Tuesday, and it's not lost or gained more than a few seconds maybe. So that's alot better than before.
__________________
Rolex Air-King 5500 Omega Seamaster Pro 300 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.