ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

BMW Guy · 29 June 2023, 12:23 PM

I have a Deep Sea DSSD 116660 with a noisy winding movement. I was quoted $1500 for LABOR ONLY, to do a full service including polishing.
Parts which I understand are extra and don't have an issue with. How much does a RSC or other qualified stores charge for just the labor part ?
Thank you in advance for any insight !

m j b · 30 June 2023, 03:48 AM

Need picture of BMW.

I think RSC service these days is around $800.

Tools · 30 June 2023, 07:14 AM

You probably need to define "noisy" as they are all noisy now days with the ball bearing rotor.

At the RSC, movement parts are included in the service, so the only extras might be new cosmetic parts or a crown if it isn't serviceable.

BMW Guy · 30 June 2023, 11:43 AM

The movement feels gritty for lack of better word, it doesn't move freely. If I don't wind up the watch (20 turns on the crown) every other day watch stops working.

BMW Guy · 30 June 2023, 11:45 AM

Quote:

Originally Posted by m j b

Need picture of BMW.

I think RSC service these days is around $800.

I have an 88 M3 and my other one is a 93 850ci. The new models don't do much for me.

Al Roy · 24 July 2023, 08:37 AM

Southeastern Service Inc..Independent Rolex Service Center. Ormond Beach,Florida..Pam Brotsky.. (386) 677-6355 all they service is Rolex with a Factory Parts Account 30 some years experience.. I just had 2 Rolex serviced and very happy with final outcome..They completely inspect the watch and will give you a written estimate on need repairs within a day or less..Mine run and look like the day I purchased them back in 2002 & 2006

Mulletmaster · 11 August 2023, 10:15 PM

1050 GBP quote here on a routine service on a 2010 sub date. Gave that a pass.

Sent from my Pixel 6 using Tapatalk

502 to Right · 10 September 2023, 01:00 PM

I was told by my Rolex AD watchmaker that they have recently separated pricing for service + polish vs. just service. As of this writing, service + polish is $800. Just service is $650. That is total cost including parts of the movement that need replacing. If you need parts outside of the movement (e.g., dial, hands, bezel, bezel insert, caseback, crown, etc.) those parts would cost extra.

29 June 2023, 12:23 PM	#1
BMW Guy "TRF" Member Join Date: Feb 2014 Real Name: Thomas Location: Tampa, FL Watch: DSSD,Sub,YMII,SD43 Posts: 151	How much should I spend on a full Service ? I have a Deep Sea DSSD 116660 with a noisy winding movement. I was quoted $1500 for LABOR ONLY, to do a full service including polishing. Parts which I understand are extra and don't have an issue with. How much does a RSC or other qualified stores charge for just the labor part ? Thank you in advance for any insight !

30 June 2023, 03:48 AM	#2
m j b "TRF" Member Join Date: Mar 2011 Real Name: Michael Location: RTP, NC, USA Watch: ♕& Ω Posts: 4,943	Need picture of BMW. I think RSC service these days is around $800. __________________ Enjoy life - it has an expiration date. Disclaimer: Please note that the avatar is not an accurate representation of how I look. The camera adds 10 pounds...

30 June 2023, 07:14 AM	#3
Tools TRF Moderator & 2023 EXPLORER 40 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 42,499	You probably need to define "noisy" as they are all noisy now days with the ball bearing rotor. At the RSC, movement parts are included in the service, so the only extras might be new cosmetic parts or a crown if it isn't serviceable. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30 June 2023, 11:43 AM	#4
BMW Guy "TRF" Member Join Date: Feb 2014 Real Name: Thomas Location: Tampa, FL Watch: DSSD,Sub,YMII,SD43 Posts: 151	The movement feels gritty for lack of better word, it doesn't move freely. If I don't wind up the watch (20 turns on the crown) every other day watch stops working.

24 July 2023, 08:37 AM	#6
Al Roy "TRF" Member Join Date: May 2023 Real Name: Al Roy Location: Melbourne,Florida Watch: SS Sub & TT DJ MOP Posts: 12	Southeastern Service Inc..Independent Rolex Service Center. Ormond Beach,Florida..Pam Brotsky.. (386) 677-6355 all they service is Rolex with a Factory Parts Account 30 some years experience.. I just had 2 Rolex serviced and very happy with final outcome..They completely inspect the watch and will give you a written estimate on need repairs within a day or less..Mine run and look like the day I purchased them back in 2002 & 2006

11 August 2023, 10:15 PM	#7
Mulletmaster "TRF" Member Join Date: Apr 2023 Location: UK Posts: 16	1050 GBP quote here on a routine service on a 2010 sub date. Gave that a pass. Sent from my Pixel 6 using Tapatalk

10 September 2023, 01:00 PM	#8
502 to Right "TRF" Member Join Date: Apr 2017 Location: United States Posts: 119	I was told by my Rolex AD watchmaker that they have recently separated pricing for service + polish vs. just service. As of this writing, service + polish is $800. Just service is $650. That is total cost including parts of the movement that need replacing. If you need parts outside of the movement (e.g., dial, hands, bezel, bezel insert, caseback, crown, etc.) those parts would cost extra.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)