ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
24 May 2022, 02:47 AM | #1 |
"TRF" Member
Join Date: Jun 2009
Real Name: Chris
Location: Mass
Watch: Rolex Sub & SD 43
Posts: 195
|
SS Bracelet scratch question...
I own a 1998 Sub and Just got a SD 43.
I see soooo many watches with almost perfect bracelet clasps. Even on the older ones for sale. My question is basically how do most people avoid getting scratches? My SD 43 has some and it's only 2-3 weeks old. In a year I fully expect it to look more worn then some from a decade ago. My Sub went in for service in 2008, and obviously is scratched up since (they polished it) as I wear it daily doing everything while wearing. it. This is not a how do I keep mine from scratching post, it's a curiosity question. I know most wear these daily and do not pamper them. Thx. |
24 May 2022, 02:53 AM | #2 |
"TRF" Member
Join Date: Apr 2019
Location: Uk
Posts: 133
|
Not sure you can. I have seen like a thin plastic coating you can apply, similar to a phone cover if that makes sense. However not sure how good it is or how often it needs replacing.
Mine was scratched after a few days of buying it brand new and was wounded for the first 5 minutes. Now it's an expensive wrist watch I wear daily, enjoy and don't worry about the scratches. Sent from my SM-G991B using Tapatalk |
24 May 2022, 03:04 AM | #3 |
"TRF" Member
Join Date: Dec 2018
Real Name: Frank
Location: Dallas,NY,Colo.
Watch: Patek 5168, 5170P
Posts: 2,405
|
Nearly all dealers will have a watch polished before offering it for sale. Some do a great job, others not so much.
|
24 May 2022, 03:06 AM | #4 |
"TRF" Member
Join Date: Dec 2016
Real Name: Luis
Location: Texas
Watch: SS Submariner Date
Posts: 1,382
|
A question for you....before you got a Rolex, were all your others watches scratched up?
Broken or torn bands? Busted crystal or cracked? I've had my share of damaged watches, done by my carelessness or by others or accidents! So i learned to try and take care of them, but sometimes they get scratched, shit happens! Just be more aware and just enjoy it your Rolex...mine has a few little scratches...and ive bumped my crystal a few more times than ive cared to say....but remember, it's just a watch, i love to look to see what the date and time is....Enjoy! |
24 May 2022, 03:39 AM | #5 | |
"TRF" Member
Join Date: Jun 2009
Real Name: Chris
Location: Mass
Watch: Rolex Sub & SD 43
Posts: 195
|
Quote:
I have a big scratch in the case of my Sub from a door. Still there. It also was involved in a motorcycle accident where the bezel, crystal and some links got ground down (trying to find a pic, no luck) but I have a few posts here from that accident after it happened, had hoped to find a pic. But got it repaired (Ins. paid for that). So its character lines, not scratches. lol. |
|
24 May 2022, 04:54 AM | #6 | |
"TRF" Member
Join Date: Jan 2007
Location: USA
Watch: Daytona
Posts: 6,063
|
Quote:
Check on ebay or google search |
|
24 May 2022, 05:12 AM | #7 |
TRF Moderator & 2024 DATE-JUST41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,049
|
You can't avoid getting scratches, especially those from just moving your wrist at the desk while on the computer.
But it easy to brush them out, which is what almost every watch for sale or photography has had done. https://www.rolexforums.com/showthread.php?t=111743
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
24 May 2022, 05:22 AM | #8 |
"TRF" Member
Join Date: Apr 2020
Location: NYC & Boston
Posts: 74
|
If you are looking to get our watch refinished, might be worth it to look up Rollieworks, now based in Florida I believe or there is a guy based in PA something Zimmerman? who also does magic. They can pretty much make your worn watches look almost brand new. Replacement parts like bezel insert i'm not sure if they have spares laying around the shop. Worth a shot. Those are probably the two i'd suggest based in the East coast.
|
24 May 2022, 05:31 AM | #9 | |
"TRF" Member
Join Date: Jul 2011
Location: Submarine
Posts: 376
|
Quote:
|
|
24 May 2022, 05:44 AM | #10 |
"TRF" Member
Join Date: Aug 2019
Real Name: Jay
Location: England
Watch: SkyD
Posts: 6,234
|
Any watch can be restored to full factory perfection if you want it to be.
|
24 May 2022, 05:44 AM | #11 | |
"TRF" Member
Join Date: Jun 2009
Real Name: Chris
Location: Mass
Watch: Rolex Sub & SD 43
Posts: 195
|
Quote:
|
|
24 May 2022, 05:53 AM | #12 |
"TRF" Member
Join Date: Aug 2019
Real Name: Martin
Location: England
Watch: 124060 Submariner
Posts: 2,871
|
It’s a life issue unfortunately, if you use something it gets scratched, chipped, dented and the like, this applies to just about everything including ourselves.
Live with it, if you don’t want to get scratches on your watch then wrap it up leave it in the box and put it away somewhere, but what’s the point in that, you bought it to wear and enjoy and you will, scratches and all. My wife wore her TT DJ to the Lake District a few years back, whilst out walking up a fell she reached up and the bit of wall she grabbed to steady herself wasn’t very solid and all she ended up doing was moving a piece of slate down onto her wrist and bang onto the side of the watch case, resulting in a large scratch on the case and fluted bezel. She loves it, the mark reminds her where it happened and she can tell the tale, will she get it taken out at service, I’m not sure she will. Nothing remains pristine unless it isn’t touched or worn, wear your watches, wear them with pride and enjoy the life scars they pick up along the way.
__________________
Martin Small Rolex, Omega, Seiko and Oris Collection |
24 May 2022, 07:07 AM | #13 |
"TRF" Member
Join Date: Jun 2020
Location: United Kingdom
Watch: Rollie
Posts: 680
|
Just being aware of what's on your wrist and not wearing jackets with coarse cuff material seems to work well. I also never rest my watch on a hard surface.
|
24 May 2022, 07:34 AM | #14 |
"TRF" Member
Join Date: Sep 2011
Location: Laguna Beach, CA
Watch: Deep Sea Blue
Posts: 230
|
For years I have been using a small piece of satin finish Scotch tape on the clasp of all my watches. I keep the Scotch tape in my safe with my watches and apply the tape after I put on the watch. At the end of the day, I peel the tape off when I put the watch back in the safe. My clasps look brand new and the tape is a cheap and easy solution to scratches.
Attached is picture of the tape and a 30 year old Omega Speedmaster with flawless clasp! |
24 May 2022, 08:18 AM | #15 |
"TRF" Member
Join Date: Feb 2021
Location: MD/NC
Watch: 114060
Posts: 2,591
|
The used ones you see for sale are (re)polished. For that matter, some of the new ones for sale are likely also cosmetically touched up from handling marks that may occur before they make it to the new owner.
In terms of prevention, there really is none as the stainless steel used on watches is a good bit softer than many of the things it makes contact with. That said, brushed finishes are pretty easy to manually touch up with the most minimal of tools if you want. As I've noted previously, the ultimate mecca for scratch protection would be a ceramic coating similar to those used on cars, that have a minimal impact on aesthetic appearance, but add a layer that has meaningful and durable scratch protection that can last for years. I would not be shocked if such a product appeared on the watch market in the not-too-distant future (and also would not be shocked if ADs offered it as a 'premium service'.) There is prospectively a huge market for this sort of product, although the application would probably not be a DIY job. It would also make cleaning the watch much easier and it would further enhance corrosion resistance. (Downside is the watch wouldn't 'feel' the same, and I like the way the brushed stainless feels.) |
24 May 2022, 12:19 PM | #16 |
2024 Pledge Member
Join Date: Jun 2016
Real Name: Jeff
Location: PNW
Posts: 1,308
|
I wear them and the scratches blend over time.
|
24 May 2022, 02:10 PM | #17 |
Banned
Join Date: Jan 2022
Location: Concord,NC
Posts: 304
|
"A ship in the harbor is safe but that is not what ships are built for. "
Set sail...and don't tape your watch. |
24 May 2022, 02:18 PM | #18 |
"TRF" Member
Join Date: Feb 2008
Real Name: Chris
Location: .
Watch: Daytonas/Subs/GMTs
Posts: 12,608
|
Bergeon 2290 .Dark grey for brushed area scratches.Like magic!
|
24 May 2022, 07:47 PM | #19 | |
"TRF" Member
Join Date: Jul 2009
Real Name: Scott
Location: UK
Watch: ^^^ for now
Posts: 5,638
|
Quote:
My wife has none. Her watches clasps and bracelets look worse after 1 week than mine do after 5 years.
__________________
Past: 6239 (yes, I know...), 16610, 16600, 116515, 116613LN, 126600, 126711 CHNR Present: 16600, 116509, Cartier Santos Green. |
|
24 May 2022, 09:09 PM | #20 |
"TRF" Member
Join Date: Aug 2008
Location: FL
Watch: maker in the US
Posts: 172
|
Instead of green scotch Brite, opt for the 3M ultra fine sanding pads. They are gray scotch Brite style pads impregnated with finer grit. These are inexpensive and I'd compare them to Bergeon satin finish pads in terms of quality. Cut a small square off and work in straight same direction strokes. For stubborn scuffs you can rub harder back and forth, just return to straight same direction strokes at the end. A master trick for the ultimate satin finish is once you finish the brushing stage with the 3M ultra fine, you cut a square of cape cod and do 1-2 passes (do not overdo!). This creates a factory finish when done right and is how I brush oyster bracelets back to like-new.
|
25 May 2022, 01:55 AM | #21 | |
"TRF" Member
Join Date: Jun 2009
Real Name: Chris
Location: Mass
Watch: Rolex Sub & SD 43
Posts: 195
|
Quote:
I'll check out the Pad you mentioned Like I said above, not too concerned with scratches, I use the above to touch up my Sub. Just getting some wear fast on my new SD. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.