The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 21 February 2020, 03:59 AM   #1
Rick Deckard
"TRF" Member
 
Rick Deckard's Avatar
 
Join Date: Jan 2019
Location: SW-Florida
Posts: 240
Springbars Part# / where to get?

I have a quick question regarding a part number and/or source for a couple of spring bars. Using the information from the thread copied in below, I verified, that I need a pair of Explorer springbars (2.00mm x 1.2mm).

Yes, I am looking for the best possible "126710 with 78200 Oyster" fit.

Does anyone have the part number for these springbars by any chance, so I can go and see if my AD will give me some or a good source for quality aftermarket parts?

Many thanks!

Chris


Quote:
Originally Posted by 037 View Post

The correct measurements are as follows:
  • 1.50mm / 1.20mm (GMT 12671x - 69200/79201/79205)
  • 1.80mm / 0.90mm (Daytona 1165xx - 78590)
  • 2.00mm / 0.90mm (Submariner 116610 - 97200)
  • 2.00mm / 1.20mm (Explorer 214270 - 77200)

I added the 214270 Explorer in case an endlink with 2.00mm springbar holes matches up with a 126710 GMT since it uses 1.20mm pivots.
HTH
__________________
Life is too short for just one Rolex!

Lineup: 1601 (SD) - 16030 (SD) - 126334 (BLSO) -116600 - 116610LV Mk.III - 126610LV - 126710BLRO Mk.III (Jubilee/Oyster) - 116500LN-0072 (BD/SD)
Rick Deckard is offline   Reply With Quote
Old 21 February 2020, 02:55 PM   #2
6538
"TRF" Member
 
6538's Avatar
 
Join Date: Mar 2012
Location: USA
Posts: 136
Quote:
Originally Posted by Rick Deckard View Post
I have a quick question regarding a part number and/or source for a couple of spring bars. Using the information from the thread copied in below, I verified, that I need a pair of Explorer springbars (2.00mm x 1.2mm).

Yes, I am looking for the best possible "126710 with 78200 Oyster" fit.

Does anyone have the part number for these springbars by any chance, so I can go and see if my AD will give me some or a good source for quality aftermarket parts?

Many thanks!

Chris
I use this website for 20mm OEM Rolex spring bars.

https://www.toxicnatos.com/collectio...bars-maxi-case
6538 is offline   Reply With Quote
Old 22 February 2020, 09:30 AM   #3
Rick Deckard
"TRF" Member
 
Rick Deckard's Avatar
 
Join Date: Jan 2019
Location: SW-Florida
Posts: 240
I will try those. Thank you.
__________________
Life is too short for just one Rolex!

Lineup: 1601 (SD) - 16030 (SD) - 126334 (BLSO) -116600 - 116610LV Mk.III - 126610LV - 126710BLRO Mk.III (Jubilee/Oyster) - 116500LN-0072 (BD/SD)
Rick Deckard is offline   Reply With Quote
Old 22 February 2020, 09:33 AM   #4
Tools
TRF Moderator & 2024 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 42,991
Otto Frei in Oakland, CA. sells high quality spring-bars.

They are carried by size, so look up what you want.
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 22 February 2020, 09:58 AM   #5
6538
"TRF" Member
 
6538's Avatar
 
Join Date: Mar 2012
Location: USA
Posts: 136
Quote:
Originally Posted by Rick Deckard View Post
I will try those. Thank you.
6538 is offline   Reply With Quote
Old 22 February 2020, 11:08 AM   #6
Rick Deckard
"TRF" Member
 
Rick Deckard's Avatar
 
Join Date: Jan 2019
Location: SW-Florida
Posts: 240
Quote:
Originally Posted by Tools View Post
Otto Frei in Oakland, CA. sells high quality spring-bars.

They are carried by size, so look up what you want.
That was my first choice, but I could not find any 2.0mm x 20mm with a 1.2mm tip in their webshop. And I found the site a bit hard to navigate.
__________________
Life is too short for just one Rolex!

Lineup: 1601 (SD) - 16030 (SD) - 126334 (BLSO) -116600 - 116610LV Mk.III - 126610LV - 126710BLRO Mk.III (Jubilee/Oyster) - 116500LN-0072 (BD/SD)
Rick Deckard is offline   Reply With Quote
Old 23 February 2020, 01:53 PM   #7
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
Quote:
Originally Posted by Rick Deckard View Post
That was my first choice, but I could not find any 2.0mm x 20mm with a 1.2mm tip in their webshop. And I found the site a bit hard to navigate.
It is tough to navigate. They also charge $10 to ship an envelope.
toxicavenger is offline   Reply With Quote
Old 23 February 2020, 01:53 PM   #8
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
Quote:
Originally Posted by 6538 View Post
I use this website for 20mm OEM Rolex spring bars.

https://www.toxicnatos.com/collectio...bars-maxi-case
Thanks for the props bro!
toxicavenger is offline   Reply With Quote
Old 26 February 2020, 01:31 AM   #9
Rick Deckard
"TRF" Member
 
Rick Deckard's Avatar
 
Join Date: Jan 2019
Location: SW-Florida
Posts: 240
Quote:
Originally Posted by toxicavenger View Post
It is tough to navigate. They also charge $10 to ship an envelope.
Hi Toxic!

I got your package with the 20/2.0/1.2 spring bars yesterday. Unfortunately, what I was trying to do, did not work out. But I keep on trying.

Would you, by any chance, have a 20mm x 1.8mm double flange with a 1.2mm tip I could buy? (1.8 width could also be 1.78 or anything around it).

I don't think I found those in your web shop.

Thanks for your help

Chris
__________________
Life is too short for just one Rolex!

Lineup: 1601 (SD) - 16030 (SD) - 126334 (BLSO) -116600 - 116610LV Mk.III - 126610LV - 126710BLRO Mk.III (Jubilee/Oyster) - 116500LN-0072 (BD/SD)
Rick Deckard is offline   Reply With Quote
Old 11 March 2020, 12:41 PM   #10
toxicavenger
"TRF" Member
 
toxicavenger's Avatar
 
Join Date: Feb 2010
Location: Colorado Springs
Watch: Seiko's
Posts: 2,563
Quote:
Originally Posted by Rick Deckard View Post
Hi Toxic!

I got your package with the 20/2.0/1.2 spring bars yesterday. Unfortunately, what I was trying to do, did not work out. But I keep on trying.

Would you, by any chance, have a 20mm x 1.8mm double flange with a 1.2mm tip I could buy? (1.8 width could also be 1.78 or anything around it).

I don't think I found those in your web shop.

Thanks for your help

Chris
Chris sorry for the late reply. These will work for you https://www.toxicnatos.com/collectio...fat-1-1mm-ends
toxicavenger is offline   Reply With Quote
Old 25 March 2020, 08:08 AM   #11
Rick Deckard
"TRF" Member
 
Rick Deckard's Avatar
 
Join Date: Jan 2019
Location: SW-Florida
Posts: 240
Quote:
Originally Posted by toxicavenger View Post
Chris sorry for the late reply. These will work for you https://www.toxicnatos.com/collectio...fat-1-1mm-ends

Thank you - I just ordered them.

Chris
__________________
Life is too short for just one Rolex!

Lineup: 1601 (SD) - 16030 (SD) - 126334 (BLSO) -116600 - 116610LV Mk.III - 126610LV - 126710BLRO Mk.III (Jubilee/Oyster) - 116500LN-0072 (BD/SD)
Rick Deckard is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.