The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Watch Forum > Rolex & Tudor Watch Topics > Rolex Reference Library

Reply
 
Thread Tools Display Modes
Old 1 December 2010, 05:30 AM   #1
Tools
TRF Moderator & 2024 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 42,990
Clear Case-back, Thomas Preik New Generation Review

Thomas Preik is a Master Watchmaker located in Germany. He has carved out a niche in the Horological Community with his custom manufactured Clear Case-backs.

We reviewed and installed his First Generation case-back last year here: This year Thomas has developed an exciting New Generation case-back that looks almost factory direct. This new case-back uses a standard 29.5mm Rolex case-back socket. Let's get the advertised specs out of the way:
- High quality Stainless Steel construction
- Sapphire Crystal
- Guaranteed Waterproof and acid proof
- Same height as original

Well, let's spend some time looking over this New Generation case-back and see if the advertised claims hold up.

For our review we have acquired an example that fits the Sub, GMT, Exp II, and a few others... He also has case-backs that will fit a variety of other models. Check out all his offerings here: http://www.customwatchconcepts.com/

Here is the one we will be using:

Copy1ofIMG_0005.jpg

Copy2ofIMG_0001.jpg

Fit and finish are excellent. The sapphire crystal is press fit into the case-back from it's face using a composite gasket. You can see the gasket around the edge of the crystal. This fitment is quite secure and is the same as that used to fit the sapphire crystal on the front of your watch..

Looking at the face we can see the ridges that mate perfectly with the Rolex case-back socket:
- Sapphire thickness - .035"/.900mm
- Sapphire diameter -- 1.025"/26.04mm
- Overall diameter ---- 1.38"/35.05mm
IMG_0007.jpg
Flipping the case-back on it's back, we can see the generous lip that the crystal and gasket fits up against. This lip keeps the crystal where it belongs and prevents any pressure from pressing it in further protecting the movement from damage. Crystal thickness is similar to the dial crystal and so it should be able to hold up to the same surface/atmospheric pressures that the watch encounters.

Copy2ofIMG_0004.jpg

Thomas advertises that it is the same "height" as an original case-back.. We found this to be true when compared with the Sub case-back. When comparing it with the slightly smaller GMT case-back, you can see that it is slightly less than a half mm taller. On the wrist, this is unnoticeable for this model.
IMG_0009.jpg

As mentioned, one of the exciting aspects of this New Generation design is it's use of the standard socket for installation and removal. I use an LG Openall case back tool (see the first gen review for use of this tool). Installation is straightforward and simple to do by any watchmaker.. The standard LG 29.5mm Rolex Socket was used.

IMG_0010.jpg

Here is what the final installation looks like on a Sub-c 116610. Measurements of the thickness of the Sub with an original case-back is .505"/12.83mm , and the measurement with the Preik case-back measured the same:

Copy2ofIMG_0003.jpg

This example is destined for a GMT 16710. Installation was easy and fit was perfect. A pressure check showed the clear case-back to be as watertight as the original steel back. Claims of acid proof were not tested....

After installation and pressure test, which it easily passed:
caseback.jpg


Clear case-backs aren't for everybody. However, if you want to show off that Rolex movement, and you want a bit of customization, this one comes highly recommended..

Thomas on-line sales site: http://www.customwatchconcepts.com/

Neither TRF nor the author have any affiliation with Mr. Preik or his enterprise. This review is for the enjoyment of, and information to, the members of TRF..
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member

Last edited by Tools; 25 October 2019 at 02:57 AM..
Tools is offline   Reply With Quote
Old 1 December 2010, 05:44 AM   #2
t e x
"TRF" Member
 
t e x's Avatar
 
Join Date: Mar 2010
Real Name: Joel
Location: Renton, WA
Watch: 16610LV
Posts: 2,990
Splendid Larry
__________________
___/ /_/ /_____ 16610LV; Ball Diver EMT II
\:::::::::::::::/
~~~~~~~~~~
t e x is offline   Reply With Quote
Old 1 December 2010, 05:44 AM   #3
STEELINOX
2024 Pledge Member
 
STEELINOX's Avatar
 
Join Date: Oct 2008
Real Name: Sink-O!
Location: a praire in AZ
Watch: ROLEX-less atm...
Posts: 14,004
Giddy Up Larry !
__________________

*Positive Waves Baby*
Lug Hole Loyalist / Chamfer Line Inspector
INFORTHE WIN
289
STEELINOX is offline   Reply With Quote
Old 1 December 2010, 05:48 AM   #4
dddrees
"TRF" Member
 
dddrees's Avatar
 
Join Date: May 2010
Real Name: Dan
Location: USA
Watch: This N That
Posts: 34,251
Excellent review, thanks for sharing Larry.

Definitely worth considering.
dddrees is online now   Reply With Quote
Old 1 December 2010, 05:52 AM   #5
buz-lh
"TRF" Member
 
buz-lh's Avatar
 
Join Date: Dec 2007
Real Name: Buz
Location: Atlanta
Watch: Rolex Tudor Pam
Posts: 5,108
Excellent writeup and pictures Larry. Looks like a great option.
__________________
Buz
The faster you move, the slower time passes, the longer you live. Peter Diamandis

buz-lh is offline   Reply With Quote
Old 1 December 2010, 06:04 AM   #6
Danand
"TRF" Member
 
Join Date: Aug 2010
Real Name: Jonathan
Location: Ottawa
Watch: 116610LN
Posts: 1,246
Thank you. Very interesting AND very tempting. Although I think it would be prudent to wait until the watch is out of warranty- wouldn't this void a warranty?
Cheers.
Danand is offline   Reply With Quote
Old 1 December 2010, 06:09 AM   #7
watchteacher
Member
 
Join Date: Mar 2010
Location: Northern NJ
Watch: Tiffany blue Sub
Posts: 244
'Guaranteed waterproof'? No watch is waterproof.
watchteacher is offline   Reply With Quote
Old 1 December 2010, 06:15 AM   #8
Danand
"TRF" Member
 
Join Date: Aug 2010
Real Name: Jonathan
Location: Ottawa
Watch: 116610LN
Posts: 1,246
Quote:
Originally Posted by watchteacher View Post
'Guaranteed waterproof'? No watch is waterproof.
True but as tools showed the watch pressure tests to the original specs, and given that the watchmaker is German it is possible he doesn't get the exact nuance of the wording in English. Would you prefer "garanteed water resistant"? Waterproof was a term used commonly not that long ago( ok maybe 35-40 years ago) so perhaps that is the term he is used to.

Last edited by Danand; 1 December 2010 at 06:17 AM.. Reason: Edit
Danand is offline   Reply With Quote
Old 1 December 2010, 06:19 AM   #9
esm
"TRF" Member
 
esm's Avatar
 
Join Date: Jul 2008
Real Name: Eric
Location: Location,Location
Watch: this, bro...
Posts: 15,340
awesome review Larry.
i think the Rolex movement looks great!
esm is offline   Reply With Quote
Old 1 December 2010, 06:19 AM   #10
Danand
"TRF" Member
 
Join Date: Aug 2010
Real Name: Jonathan
Location: Ottawa
Watch: 116610LN
Posts: 1,246
Btw I can assure you his English is wayyyyy better than my German!
Danand is offline   Reply With Quote
Old 1 December 2010, 06:29 AM   #11
TSW
"TRF" Member
 
TSW's Avatar
 
Join Date: Feb 2009
Real Name: TSW
Location: Le Brassus
Watch: Rolex & AP's
Posts: 27,449
Great review as always Larry
__________________

AP Owners Club
IG @swiss.watch.connection
TSW is offline   Reply With Quote
Old 1 December 2010, 06:36 AM   #12
spuds
"TRF" Member
 
spuds's Avatar
 
Join Date: Nov 2009
Real Name: Dan
Location: Essex, UK
Watch: West Ham! COYI!!
Posts: 7,941
Excellent!!

Thanks for sharing & I'd certainly do it!
__________________
Onwards & Upwards Rodders...... Onwards & Upwards.

Life is not about how fast you can run or how high you can climb...........
It's about how well you can bounce!!



TRF HALL OF FAME JANUARY 2010
spuds is offline   Reply With Quote
Old 1 December 2010, 06:44 AM   #13
watchteacher
Member
 
Join Date: Mar 2010
Location: Northern NJ
Watch: Tiffany blue Sub
Posts: 244
Quote:
Originally Posted by Danand View Post
True but as tools showed the watch pressure tests to the original specs, and given that the watchmaker is German it is possible he doesn't get the exact nuance of the wording in English. Would you prefer "garanteed water resistant"? Waterproof was a term used commonly not that long ago( ok maybe 35-40 years ago) so perhaps that is the term he is used to.
I just ordered one for my two tone blue sub, so I'll test it myself after I install it. For clarity, I just wanted to correct the term; people toss the word waterproof often around. And water resistance is a condition; you can have the watch tested in the morning, knock the watch on its crown an hour later and have it now be not water resistant, or indeed less water resistant.

And the price to me was under $160 to me, the price on the website includes the heavy VAT tax, which doesn't apply to US residents.
watchteacher is offline   Reply With Quote
Old 1 December 2010, 06:48 AM   #14
Danand
"TRF" Member
 
Join Date: Aug 2010
Real Name: Jonathan
Location: Ottawa
Watch: 116610LN
Posts: 1,246
Quote:
Originally Posted by watchteacher View Post
I just ordered one for my two tone blue sub, so I'll test it myself after I install it. For clarity, I just wanted to correct the term; people toss the word waterproof often around. And water resistance is a condition; you can have the watch tested in the morning, knock the watch on its crown an hour later and have it now be not water resistant, or indeed less water resistant.

And the price to me was under $160 to me, the price on the website includes the heavy VAT tax, which doesn't apply to US residents.
You'll have to post a thread later to let us all know how it goes. Is your watch old enough to be out of warranty? Good luck with it. I think it looks like a really nice option.
Just saw that your sub is a Tiffany so I'll assume it's out of warranty!

Last edited by Danand; 1 December 2010 at 06:50 AM.. Reason: Edit
Danand is offline   Reply With Quote
Old 1 December 2010, 06:56 AM   #15
SteKos
Member
 
Join Date: Mar 2009
Location: Wisconsin
Posts: 150
It's been a while since I've been on his page, I see he now has one for the 116713. Looks like it's time to mod my GMT.
SteKos is offline   Reply With Quote
Old 1 December 2010, 07:08 AM   #16
Numismatist
"TRF" Member
 
Numismatist's Avatar
 
Join Date: Nov 2007
Real Name: Chris
Location: Camden ME & STT
Watch: 116600
Posts: 6,350
I'm waiting for that toothed 2nd generation to be available for a datejust, then I'm all in!
__________________
Rolex 116600 Sea-dweller
Montblanc Solitaire Doué Black & White Legrand FP
Montblanc Solitaire Doué Black & White RB
Montblanc Meisterstück Diamond Mozart BP
Montblanc Meisterstück Mozart BP
Numismatist is offline   Reply With Quote
Old 1 December 2010, 07:14 AM   #17
1340jas
"TRF" Member
 
Join Date: Dec 2009
Real Name: Jason
Location: Wales
Watch: SS Sub Date 'V'
Posts: 199
What a great review with very good photographs. I am seriously considering one of these casebacks.
Well done Larry.
1340jas is offline   Reply With Quote
Old 1 December 2010, 07:31 AM   #18
t e x
"TRF" Member
 
t e x's Avatar
 
Join Date: Mar 2010
Real Name: Joel
Location: Renton, WA
Watch: 16610LV
Posts: 2,990
Quote:
Originally Posted by Danand View Post
Thank you. Very interesting AND very tempting. Although I think it would be prudent to wait until the watch is out of warranty- wouldn't this void a warranty?
Cheers.
'

Why can't one replace with the original caseback prior to any warranty work that may be needed?
__________________
___/ /_/ /_____ 16610LV; Ball Diver EMT II
\:::::::::::::::/
~~~~~~~~~~
t e x is offline   Reply With Quote
Old 1 December 2010, 07:41 AM   #19
Skullring
"TRF" Member
 
Skullring's Avatar
 
Join Date: Mar 2009
Real Name: Phillip
Location: Alabama
Watch: Triple 6 SD
Posts: 1,720
Very nice. Thorough as always Larry. Thanks for the review.
__________________
It is only with the heart that one can see rightly; what is essential is invisible to the eye.
- Antoine de Saint Exupéry
Skullring is offline   Reply With Quote
Old 1 December 2010, 08:00 AM   #20
Dr.Brian
2024 Pledge Member
 
Dr.Brian's Avatar
 
Join Date: Sep 2009
Real Name: Brian
Location: CA dreamin'
Watch: ing the market.
Posts: 5,895
Thanks for the review Larry. Looks good and the price is very appealing. My only reservation is that I take my SD in the ocean/pool all the time.
__________________
-Brian
AUDENTES FORTUNA IUVAT

十人十色
Dr.Brian is offline   Reply With Quote
Old 1 December 2010, 08:17 AM   #21
conrail
"TRF" Member
 
conrail's Avatar
 
Join Date: Sep 2010
Location: Boston
Posts: 3,177
Looks great, thanks for the write up and great pictures!
__________________
"Oh, you give a f****' aspirin a headache, pal!"
conrail is offline   Reply With Quote
Old 1 December 2010, 08:31 AM   #22
Danand
"TRF" Member
 
Join Date: Aug 2010
Real Name: Jonathan
Location: Ottawa
Watch: 116610LN
Posts: 1,246
Quote:
Originally Posted by t e x View Post
'

Why can't one replace with the original caseback prior to any warranty work that may be needed?
I guess I just get a little paranoid about these sorts of things
Danand is offline   Reply With Quote
Old 1 December 2010, 08:36 AM   #23
Dan Pierce
2024 Pledge Member
 
Dan Pierce's Avatar
 
Join Date: Dec 2006
Real Name: D'OH!
Location: Kentucky
Watch: Rolex-1 Tudor-3
Posts: 35,662
Picture perfect, Larry. Well done!
dP
__________________
TRF Member# 1668
Bass Player in TRF "AFTER DARK" Bar & NightClub Band
Commander-in-Chief of The Nylon Nation
The Crown & Shield Club
Honorary Member of P-Club
Dan Pierce is offline   Reply With Quote
Old 1 December 2010, 09:48 AM   #24
jmsrolls
Banned
 
Join Date: May 2008
Location: USA
Posts: 3,185
Looks good, Larry!

As you know, I tried one of his Gen I backs on my EXPII but the dimensions changed the way the watch sat on my wrist so I put the steel back on.



I also ordered one of his display backs for my Omega SMP and he sent me the wrong size (mid-size). Eventually he sent the correct back but the edge-to-edge diameter was .5mm too large which prevented the back from screwing all the way down for a seal. Fortunately my watchmaker was able to machine the edge down and make it fit. (The machining cost me an extra $50.)

I hope someone will install a Gen II on an EXPII and provide measurements for a comparison with the OEM.

Fr. John†
jmsrolls is offline   Reply With Quote
Old 1 December 2010, 09:52 AM   #25
xjeeunitx
2024 Pledge Member
 
xjeeunitx's Avatar
 
Join Date: Aug 2008
Posts: 5,430
This is very cool and tempting!
xjeeunitx is offline   Reply With Quote
Old 1 December 2010, 10:06 AM   #26
HL65
TRF Moderator & 2024 Patron
 
HL65's Avatar
 
Join Date: Dec 2007
Real Name: Ken
Location: SW Florida
Watch: One on my wrist.
Posts: 63,323
Very cool Larry!!! Great review!
__________________

SPEM SUCCESSUS ALIT
HL65 is offline   Reply With Quote
Old 1 December 2010, 10:41 AM   #27
globalmedia33
"TRF" Member
 
globalmedia33's Avatar
 
Join Date: Mar 2009
Real Name: Thien
Location: Frisco,TX/Saigon
Watch: All Rolex
Posts: 2,754
Very nice. Thanks for sharing Larry....
__________________
Sub. 5513
116710LN
116610LV
“I THINK PERFECTION IS UGLY. SOMEWHERE IN THE THINGS HUMANS MAKE, I WANT TO SEE SCARS, FAILURE, DISORDER AND DISTORTION" - YOHJI YAMAMOTO
globalmedia33 is offline   Reply With Quote
Old 1 December 2010, 10:49 AM   #28
rfknauss
2024 Pledge Member
 
rfknauss's Avatar
 
Join Date: Nov 2009
Real Name: Richard
Location: Macungie, PA
Watch: 5513 Sub, LV Sub
Posts: 14,491
Awesome Larry ..... thank you for sharing!
__________________


"Few things in life give man as great a pleasure as wearing a Rolex!"

TRF's "AFTER DARK" Bar & NightClub Patron
rfknauss is offline   Reply With Quote
Old 1 December 2010, 10:58 AM   #29
sleddog
TRF Moderator & 2024 Patron
 
sleddog's Avatar
 
Join Date: Jul 2007
Real Name: Rob
Location: Nearby.
Posts: 24,898
A great post Larry!!
__________________
He who wears a Rolex is always on time, even when late!!

TRF's "After Dark" Bar & Nightclub Patron-Founding Member..
sleddog is offline   Reply With Quote
Old 1 December 2010, 11:47 AM   #30
Latrodectus
2024 Pledge Member
 
Latrodectus's Avatar
 
Join Date: Sep 2008
Real Name: Fred
Location: KY, USA
Watch: GMT-Master II
Posts: 9,986
Very beautiful, Larry. I want one too!
__________________

Member # 16057
4-Hands Club
Tosser Club Member
TRF Skypers Group
Latrodectus is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.