ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

PhilLynott · 20 November 2019, 09:43 AM

Hey everyone, new here I hope this isn't a topic that's been beaten to death (after all that is how I found this forum with a similar thread).

I took my new Datejust with Jubilee bracelet to my local shop 1. to get a link removed and 2. it was a bit noisy (I thought maybe once it was fitted properly that would go away but wanted it checked anyways). They were a bit concerned but not certain about it being a real Rolex Jubilee and suggested I take it to a Rolex certified dealer. Before I do that, and since none are open this late, I figured I'd see if anyone here sees anything glaringly wrong or has any opinions. Appreciate any help!

Reads: "L9 Steelinox 62510H"

Again appreciate any help. I'm new to this and trying to learn as much as I can. Let me know if any other images or better ones are needed.

Thanks again.

GLADIATOR · 20 November 2019, 12:37 PM

Looks OK to me

PhilLynott · 20 November 2019, 01:46 PM

Thanks for the reply Gladiator. Have spent the last few hours scanning around and feel better about it and your post helps as well.

I found a Rolex certified dealer actually really close to me that I'm going to stop by tomorrow and get confirmation and also still need to get the rattle sound its making sorted. Will update here tomorrow.

Cheers

GLADIATOR · 20 November 2019, 02:19 PM

Let us know.

mrs_LA · 20 November 2019, 03:55 PM

Looks good to me as well

jvmartin · 20 November 2019, 05:12 PM

Looks like a 16014 with an aftermarket sapphire crystal but everything else looks good! Very nice/unique dial!

crowncollection · 20 November 2019, 10:16 PM

Clasp is real, you need to remove a stew from a link and show us to see if the links secretion is authentic or replaced

Sent from my iPhone using Tapatalk

Jabbo84 · 20 November 2019, 10:24 PM

I have the exact bracelet on my date just. Your good

crowncollection · 20 November 2019, 10:29 PM

Quote:

Originally Posted by Jabbo84

I have the exact bracelet on my date just. Your good

So you can tell the links section is not replaced amazing

Sent from my iPhone using Tapatalk

PhilLynott · 21 November 2019, 12:41 AM

Appreciate the replies everyone.

Quote:

Originally Posted by jvmartin

Looks like a 16014 with an aftermarket sapphire crystal but everything else looks good! Very nice/unique dial!

Thanks! The blue dial/roman numerals/fluted bezel was the combination I was on the lookout for I love it. Now just have to get used to the 36mm size compared to my old 41mm Seiko daily wear!

@crown - I don't have a tool to remove links, when I stop by the shop today I'll have them take a look.

crowncollection · 21 November 2019, 12:55 AM

Hey photo of the thread in the screw

Sent from my iPhone using Tapatalk

PhilLynott · 21 November 2019, 01:17 AM

Quote:

Originally Posted by crowncollection

Hey photo of the thread in the screw

Sent from my iPhone using Tapatalk

Is this what you're looking for? If not let me know, again don't have the ability to remove the pins til I get the right tool.

GLADIATOR · 21 November 2019, 01:50 AM

Quote:

Originally Posted by crowncollection

so you can tell the links section is not replaced amazing

sent from my iphone using tapatalk

lol

GradyPhilpott · 21 November 2019, 03:02 AM

Quote:

Originally Posted by crowncollection

Clasp is real, you need to remove a stew from a link and show us to see if the links secretion is authentic or replaced

Sent from my iPhone using Tapatalk

crowncollection · 21 November 2019, 08:38 AM

Quote:

Originally Posted by GradyPhilpott

Typo I meant a screw and definitely not secretion dam word prediction lol

Link sections are removed and clasp and end pieces retained all the time by dealers

Sent from my iPhone using Tapatalk

crowncollection · 21 November 2019, 08:39 AM

Quote:

Originally Posted by PhilLynott

Is this what you're looking for? If not let me know, again don't have the ability to remove the pins til I get the right tool.

No I need to see the thread end

Sent from my iPhone using Tapatalk

GradyPhilpott · 21 November 2019, 10:52 AM

Quote:

Originally Posted by crowncollection

Typo I meant a screw and definitely not secretion dam word prediction lol

Link sections are removed and clasp and end pieces retained all the time by dealers

Sent from my iPhone using Tapatalk

I know.

It was the link secretions that really cracked me up.

Sent from my SM-G975U using Tapatalk

Knappo 1307 · 21 November 2019, 10:57 AM

Quote:

Originally Posted by GradyPhilpott

I know.

It was the link secretions that really cracked me up.

Sent from my SM-G975U using Tapatalk

Grady I had that once in college, a little penicillin cleared it up...

Just playing David

PhilLynott · 21 November 2019, 12:25 PM

Went to a local certified dealer today and had a great experience. The jubilee checked out fine and they fitted it for me and answered a few questions and when I asked how much I owed they said to not worry about it and just promise to stop by next time I was looking to buy and I most definitely will. I got away with buying this one online and love the watch it was exactly what I was after but I think I'd much prefer in person dealings in the future so it's nice to have a local place to lean on.

Thanks again for all the responses this forum is a great resource looking forward to learning a ton here.

crowncollection · 21 November 2019, 01:31 PM

Quote:

Originally Posted by GradyPhilpott

I know.

It was the link secretions that really cracked me up.

Sent from my SM-G975U using Tapatalk

Quote:

Originally Posted by Knappo 1307

Grady I had that once in college, a little penicillin cleared it up...

Just playing David

You guys crack me up lol

Have a great day boys cheers

Sent from my iPhone using Tapatalk

GradyPhilpott · 21 November 2019, 02:40 PM

Quote:

Originally Posted by Knappo 1307

Grady I had that once in college, a little penicillin cleared it up...

Just playing David

Sent from my SM-G975U using Tapatalk

Knappo 1307 · 21 November 2019, 10:32 PM

Quote:

Originally Posted by PhilLynott

Went to a local certified dealer today and had a great experience. The jubilee checked out fine and they fitted it for me and answered a few questions and when I asked how much I owed they said to not worry about it and just promise to stop by next time I was looking to buy and I most definitely will. I got away with buying this one online and love the watch it was exactly what I was after but I think I'd much prefer in person dealings in the future so it's nice to have a local place to lean on.

Thanks again for all the responses this forum is a great resource looking forward to learning a ton here.

I'm from Illinois, would love to hear where you went?

PhilLynott · 22 November 2019, 12:11 AM

Quote:

Originally Posted by Knappo 1307

I'm from Illinois, would love to hear where you went?

It was at Oak Brook mall. If you've ever been there it's at least for me always impossible to find anything and I walked in and turned the corner and got hit with a huge rolex sign instantly, was meant to be haha

Knappo 1307 · 22 November 2019, 12:33 AM

Quote:

Originally Posted by PhilLynott

It was at Oak Brook mall. If you've ever been there it's at least for me always impossible to find anything and I walked in and turned the corner and got hit with a huge rolex sign instantly, was meant to be haha

CD peacock.

PhilLynott · 22 November 2019, 02:13 AM

Quote:

Originally Posted by Knappo 1307

CD peacock.

Yep that's the one

Knappo 1307 · 22 November 2019, 02:37 AM

Quote:

Originally Posted by PhilLynott

Yep that's the one

I know it well. Congrats on a beautiful watch!

PhilLynott · 22 November 2019, 04:07 AM

Quote:

Originally Posted by Knappo 1307

I know it well. Congrats on a beautiful watch!

Thanks I love it! Didn't take long to get used to the 36mm size compared to my old 41mm Seiko either, already feels right.

20 November 2019, 09:43 AM	#1
PhilLynott "TRF" Member Join Date: Nov 2019 Location: Illinois Watch: Breguet marine Posts: 698	Any Issues With This Jubilee Bracelet? Hey everyone, new here I hope this isn't a topic that's been beaten to death (after all that is how I found this forum with a similar thread). I took my new Datejust with Jubilee bracelet to my local shop 1. to get a link removed and 2. it was a bit noisy (I thought maybe once it was fitted properly that would go away but wanted it checked anyways). They were a bit concerned but not certain about it being a real Rolex Jubilee and suggested I take it to a Rolex certified dealer. Before I do that, and since none are open this late, I figured I'd see if anyone here sees anything glaringly wrong or has any opinions. Appreciate any help! Reads: "L9 Steelinox 62510H" Again appreciate any help. I'm new to this and trying to learn as much as I can. Let me know if any other images or better ones are needed. Thanks again.

20 November 2019, 12:37 PM	#2
GLADIATOR "TRF" Member Join Date: Mar 2010 Real Name: Adam Location: Costa Blanca, Watch: YMII,GMTII,DAYTONA Posts: 5,288	Looks OK to me __________________ The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is. Winston Churchill "We judge ourselves by what we feel capable of doing, while others judge us by what we have already done."

20 November 2019, 02:19 PM	#4
GLADIATOR "TRF" Member Join Date: Mar 2010 Real Name: Adam Location: Costa Blanca, Watch: YMII,GMTII,DAYTONA Posts: 5,288	Let us know. __________________ The truth is incontrovertible. Malice may attack it, ignorance may deride it, but in the end, there it is. Winston Churchill "We judge ourselves by what we feel capable of doing, while others judge us by what we have already done."

20 November 2019, 03:55 PM	#5
mrs_LA 2024 Pledge Member Join Date: Mar 2018 Location: SoCal Posts: 3,686	Looks good to me as well __________________ Instagram: @angelcitytime

20 November 2019, 05:12 PM	#6
jvmartin "TRF" Member Join Date: Feb 2014 Location: Los Angeles Posts: 2,349	Looks like a 16014 with an aftermarket sapphire crystal but everything else looks good! Very nice/unique dial! Last edited by jvmartin; 20 November 2019 at 05:13 PM.. Reason: sapphire

20 November 2019, 01:46 PM	#3
PhilLynott "TRF" Member Join Date: Nov 2019 Location: Illinois Watch: Breguet marine Posts: 698	Thanks for the reply Gladiator. Have spent the last few hours scanning around and feel better about it and your post helps as well. I found a Rolex certified dealer actually really close to me that I'm going to stop by tomorrow and get confirmation and also still need to get the rattle sound its making sorted. Will update here tomorrow. Cheers

20 November 2019, 10:16 PM	#7
crowncollection "TRF" Member Join Date: Jan 2011 Real Name: David Location: australia Posts: 20,157	Clasp is real, you need to remove a stew from a link and show us to see if the links secretion is authentic or replaced Sent from my iPhone using Tapatalk __________________ watches many

20 November 2019, 10:24 PM	#8
Jabbo84 Banned Join Date: May 2019 Real Name: John Location: Tyler,Texas Watch: Rolex/Piaget Posts: 966	I have the exact bracelet on my date just. Your good

21 November 2019, 12:55 AM	#11
crowncollection "TRF" Member Join Date: Jan 2011 Real Name: David Location: australia Posts: 20,157	Hey photo of the thread in the screw Sent from my iPhone using Tapatalk __________________ watches many

21 November 2019, 12:25 PM	#19
PhilLynott "TRF" Member Join Date: Nov 2019 Location: Illinois Watch: Breguet marine Posts: 698	Went to a local certified dealer today and had a great experience. The jubilee checked out fine and they fitted it for me and answered a few questions and when I asked how much I owed they said to not worry about it and just promise to stop by next time I was looking to buy and I most definitely will. I got away with buying this one online and love the watch it was exactly what I was after but I think I'd much prefer in person dealings in the future so it's nice to have a local place to lean on. Thanks again for all the responses this forum is a great resource looking forward to learning a ton here.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)