The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Watch Forum > Rolex & Tudor Watch Topics > Rolex Reference Library

Reply
 
Thread Tools Display Modes
Old 7 April 2010, 08:52 AM   #1
mike
"TRF" Member
 
mike's Avatar
 
Join Date: Jul 2005
Posts: 22,683
Tritium lume markers-CREDIT JEDLY1

before it gets lost in the bevel thread..and it is another thing that quite a few myths exist around. to summarise the discussion to date from years of study and debate over on VRF and elsewhere... a quick précis.

On Rolex watches tritium was introduced as a safe alternative to the previously used radium circa 1962, and is most commonly identified on the dial with swiss < 25t until it was discarded for the safer luminova in the 90's - i wont digress into the whole underline thing.

Although we simply call it tritium it is actually a compound containing a phosphorous substance and within that overall compound there is some tritium which acts as the power source for the phosphorous material ((like the battery).

From the introduction onwards it appears that various different 'recipes' were used for this compound, as well as different physical applications to the dial.

If you line up a whole load of watches in consectutive years you can actually see the pattern of how these mixtures/applications changed, even more so if you use an ultraviolet loupe and can see the make up of the marker and its response to light.

what you tend to see - not as an exact science :

1. up until about 64/5/6. the gilt dials... markers tend to be quite domed and textured in their appearance and when exposed to a strong light source the luminous material will glow green for a short time. Put a UV loupe on them and it is a uniform green finish.

2. 67/68 first of the matt dials.. this seems to have been a cross over period in the manufacturing approach, two extremes along side.. very domed markers like half maltesers for those who know what they are, glow green for a short time if exposed to a strong light source. I guess this is why there are often so many posts requersting opinion from watches in this period as they seemt o create the most confusion.

OR

very flat very thin layer completely dead to light exposure.

3. 68-74/5 - greatly reduced amount of compound applied ,flatish application of the mixture nearly always dead to any light stimulation. you get used to see-ing how the application was made on different models in this time period, some with a very weaved texture., some dead flat. Usually greenish/bluish crystals present as the only glow under a UV loupe. tends to yellow over time.

4. mid 70's back to a more textured appearance with a bit more dome to the markers, often orangey crystals are the only things stimulated as visible under UV loupe. Does not tend to respond to light stimulous but there appears to be some small amount of power left in the tritium and often in a dark room in the middle of the night the markers/hands can be read/seen. Examples often tends to orange/brown as well as just yellow as they age.

5. early 80's - new mix again flat, glossier, no repsonse to light stimulous but often some power left in the tritium that will give some luninous in darkened conditions once the eyes have become accustomed.


thats pretty much where we leave vintage.


the tricky bit is the 60's stuff that still glows green, if you pick up a watch and it does , then it doesnt neccessarily mean its relumed, neither does it mean its OK, the relume question tends to be the trickiest (unless its just a crap job of physical application), is often virtually impossible to address over the net, and even in hand can leave a room split down the middle.

what we do know for the late 60's/70/870's stuff is that it appears from all the long term stored examples discussed, is that left to its own devices the tritium based compound will age, and gain patina. From what we have seen and a few experiments conducted we see that light has a bleaching effect on the mixture which slows the development of patina and keeps it light.

the tricky bit with this is that the mixture can also gain patina through moisture ingress ( especially for example in a humid climate). The trick here is to look for any other seconday signs of mositure.. staining, corrosion etc ..

Ok, not an authorative guide, and off course there will be examples that maybe buck this, it is after all Rolex.
mike is offline   Reply With Quote
Old 26 April 2010, 06:50 AM   #2
truetime
"TRF" Member
 
truetime's Avatar
 
Join Date: Feb 2009
Real Name: Krit
Location: GMT +0
Watch: 1652055131675
Posts: 302
already noted in my book

many thanks for the GREAT INFO

bests,
Krit
truetime is offline   Reply With Quote
Old 20 July 2010, 01:03 AM   #3
jimmy1022
Member
 
Join Date: Jul 2010
Real Name: Jimmy
Location: UK
Watch: Bi GMT
Posts: 57
Newbie first question,
Would say a 96 GMT be the older tritium or luminova dial?

EDIT: just checked and it has "Swiss-T< 25" so I guess that would be a yes!
must read posts more slowly.

Regards

Jimmy
jimmy1022 is offline   Reply With Quote
Old 24 July 2010, 10:19 PM   #4
bhoge4848
Member
 
Join Date: Jul 2010
Real Name: Brandon George
Location: Ohio
Watch: President
Posts: 44
Great info!

Awesome info Mike! I am sure that that has been a topic of discussion both on and off TRF for quite some time. I know I have been wondering that for a while now. I have other tritium pieces and my Prez does not glow nearly as bright as them; now I know why.
bhoge4848 is offline   Reply With Quote
Old 26 July 2010, 05:45 AM   #5
Capt G
"TRF" Member
 
Join Date: Jul 2010
Location: Delaware
Posts: 1
Why doesn't Rolex put trititum hands and markers on all their watches?
Capt G is offline   Reply With Quote
Old 11 November 2012, 12:29 AM   #6
Monkeyman
Member
 
Join Date: Nov 2007
Real Name: Daniel
Location: Perth
Watch: OUT!
Posts: 114
Great info thanks
Monkeyman is offline   Reply With Quote
Old 11 December 2012, 04:14 PM   #7
KingsleyWalcott
"TRF" Member
 
Join Date: Nov 2012
Location: SoCal
Posts: 13
Very interesting reading...thanks for posting.
KingsleyWalcott is offline   Reply With Quote
Old 19 January 2013, 09:54 AM   #8
mlastic
"TRF" Member
 
mlastic's Avatar
 
Join Date: Jan 2013
Real Name: MIKE
Location: NJ
Watch: 116610LV "HULK"
Posts: 34
What color is the lume on the "hulk" sub suposed to be? Green(old style) or new blue style
color??

Thx
mlastic is offline   Reply With Quote
Old 28 February 2013, 02:15 PM   #9
Tools
TRF Moderator & 2024 Patron
 
Tools's Avatar
 
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 42,990
Markings Information:

"T SWISS MADE T" indicates that the radioactive material Tritium is present on the wristwatch. The amount of radioactive material emitted is a maximum of 25 milliCurie.

"SWISS T < 25" more specifically indicates that the wristwatch emits an amount of Tritium that is less than the 25 milliCurie limit.

"SWISS T 25" indicates that the wristwatch emits the maximum allowable amount of Tritium at a full 25 milliCurie.

"Swiss" and "Swiss Made" are now used for Luminova, but were previously used for Radium dials prior to ~1960
__________________
(Chill ... It's just a watch Forum.....)
NAWCC Member
Tools is offline   Reply With Quote
Old 19 January 2014, 12:11 AM   #10
mikie1
Banned
 
Join Date: Dec 2013
Location: US Republic
Posts: 230
Still available

How come tritium paint is still available.Opps...not the nanny state just Rolex decision I guess.TE]
mikie1 is offline   Reply With Quote
Old 19 January 2014, 12:42 AM   #11
dysondiver
"TRF" Member
 
dysondiver's Avatar
 
Join Date: Jul 2010
Real Name: tom
Location: northern ireland
Watch: my fins
Posts: 10,063
i love the knowledge and the detail on this site is amazing ,, great info , interesting read too.
dysondiver is offline   Reply With Quote
Old 21 July 2014, 04:31 AM   #12
strafer_kid
"TRF" Member
 
strafer_kid's Avatar
 
Join Date: Oct 2009
Real Name: Kenny
Location: northern ireland
Watch: SDs, Subs & GMTs
Posts: 5,127
Great read- vey informative and much appreciated!
strafer_kid is offline   Reply With Quote
Old 24 October 2014, 03:07 PM   #13
bobswatches
Banned
 
Join Date: Aug 2010
Location: Huntington Beach
Watch: Newman Daytona
Posts: 344
Excellent reference on Rolex watches and some history. thanks!!
bobswatches is offline   Reply With Quote
Old 19 February 2015, 12:48 PM   #14
jkyrolex
"TRF" Member
 
jkyrolex's Avatar
 
Join Date: Feb 2015
Real Name: Jon
Location: Loudoun County VA
Watch: 1995 GMT16700 S
Posts: 10
I have a 95 GMT. It doesn't glow in the dark anymore. Is there a way to revive the glow? Mine says Swiss T <25
jkyrolex is offline   Reply With Quote
Old 20 February 2015, 12:56 AM   #15
nickb732
"TRF" Member
 
nickb732's Avatar
 
Join Date: Feb 2014
Real Name: Nicholas
Location: UK
Posts: 2,630
Quote:
Originally Posted by jkyrolex View Post
I have a 95 GMT. It doesn't glow in the dark anymore. Is there a way to revive the glow? Mine says Swiss T <25
You can get a Service luminova dial.
__________________


Nick
nickb732 is offline   Reply With Quote
Old 21 February 2015, 10:47 PM   #16
jkyrolex
"TRF" Member
 
jkyrolex's Avatar
 
Join Date: Feb 2015
Real Name: Jon
Location: Loudoun County VA
Watch: 1995 GMT16700 S
Posts: 10
Quote:
Originally Posted by nickb732 View Post
You can get a Service luminova dial.
Does that devalue the watch?
jkyrolex is offline   Reply With Quote
Old 23 February 2015, 01:52 PM   #17
d-rock
"TRF" Member
 
Join Date: Sep 2010
Location: CONUS
Posts: 76
Quote:
Originally Posted by jkyrolex View Post
Does that devalue the watch?
To a collector...Yes.
To others wanting luminova on the dial/hands, maybe not so much.
d-rock is offline   Reply With Quote
Old 19 April 2015, 03:15 AM   #18
ticktack
Banned
 
Join Date: Apr 2015
Real Name: Elly
Location: states
Watch: rolex and others
Posts: 127
this is my first post.

many thanks for this great info
ticktack is offline   Reply With Quote
Old 3 June 2015, 08:41 AM   #19
kpblasko
"TRF" Member
 
Join Date: May 2015
Location: Long Beach, CA
Posts: 1
Recently picked up an early 90s 16570 that shows no apparent lume on the markers. The markers appear super clean and just very slightly off white. Under a UV flashlight, I can see some small bits of glowing residue on a few of the markers. The dial also shows the period expected T<25. Am I safe to assume this is an all original dial whose tritium markers have just worn out completely?
kpblasko is offline   Reply With Quote
Old 8 August 2015, 04:41 AM   #20
R-H
"TRF" Member
 
R-H's Avatar
 
Join Date: May 2015
Real Name: Robert
Location: Palm Springs CA.
Watch: 1967 5513
Posts: 385
Mike, thanks for the great article, myself being new to vintage watches found it highly informative. I came into a 1967, 5513, 1,73x,xxx ser.# a few month back, I have left it in the bright sun for an hour, brought it into to a dark room, but no glow. The other night the I had a LED flash light shining on it and got the green glow , was very bright for about 2 minutes, and slowly faded.

SAM_0527.jpg
R-H is offline   Reply With Quote
Old 10 August 2015, 08:32 PM   #21
45adolffwatsonn
Banned
 
Join Date: Aug 2015
Location: INDIA
Posts: 1
Hi, welcome to this forum site . I think you should ask for this query to the expert .I apologize that I can't help for your problem
45adolffwatsonn is offline   Reply With Quote
Old 23 August 2015, 09:58 AM   #22
Pharmlou
"TRF" Member
 
Pharmlou's Avatar
 
Join Date: Apr 2015
Real Name: Louis
Location: Australia
Watch: 114060 16710 5513
Posts: 95
5513 1967 tritium

Quote:
Originally Posted by R-H View Post
Mike, thanks for the great article, myself being new to vintage watches found it highly informative. I came into a 1967, 5513, 1,73x,xxx ser.# a few month back, I have left it in the bright sun for an hour, brought it into to a dark room, but no glow. The other night the I had a LED flash light shining on it and got the green glow , was very bright for about 2 minutes, and slowly faded.

Attachment 647879
Hey Robert,
did you find out any information about you dial. I'm looking at buying the same year Sub for myself and it seems to exhibit the same glow only to artificial light.

Cheers, Lou
Pharmlou is offline   Reply With Quote
Old 15 October 2015, 11:27 AM   #23
5512vs5513
"TRF" Member
 
Join Date: May 2015
Location: Miami
Posts: 54
Icon14

Wow, that is some great info. I think the fact that it was written 10 years a go, makes even cooler!

Anyway, my question is towards the late 60s models. I recently saw a GMT that the color in the markers had a bit of white in one of the markers. Is this normal??

This is marked as just Swiss, and is an "exclamation point" dial.

Thanks
5512vs5513 is offline   Reply With Quote
Old 8 August 2016, 08:38 AM   #24
ched
Banned
 
Join Date: Aug 2016
Location: U.S
Posts: 53
great information mate
ched is offline   Reply With Quote
Old 8 August 2016, 08:49 AM   #25
droptopman
"TRF" Member
 
droptopman's Avatar
 
Join Date: Jun 2015
Real Name: Mark
Location: Washington State
Watch: SUBS and GMT's!
Posts: 9,664
Great stuff here. Thanks for the excellent summary!
__________________
Judge Smails: Ty, what did you shoot today?
Ty: Oh, Judge, I don't keep score.
Judge Smails: Then how do you measure yourself with other golfers?
Ty: By height.
droptopman is offline   Reply With Quote
Old 27 October 2016, 05:14 AM   #26
rilox
"TRF" Member
 
Join Date: Oct 2014
Location: italy
Watch: rolex 5513
Posts: 5
good job
rilox is offline   Reply With Quote
Old 11 March 2017, 09:54 AM   #27
Chris Was Here
"TRF" Member
 
Join Date: Mar 2017
Location: Basement
Watch: A McCallitt
Posts: 3
Quote:
Originally Posted by R-H View Post
Mike, thanks for the great article, myself being new to vintage watches found it highly informative. I came into a 1967, 5513, 1,73x,xxx ser.# a few month back, I have left it in the bright sun for an hour, brought it into to a dark room, but no glow. The other night the I had a LED flash light shining on it and got the green glow , was very bright for about 2 minutes, and slowly faded.

Attachment 647879
Not bad!! I'm wondering if I have a tritium dial with Luminova hands
Attached Images
File Type: jpg tritium luminova.jpg (45.5 KB, 2191 views)
Chris Was Here is offline   Reply With Quote
Old 23 June 2017, 05:27 AM   #28
Raakhi
"TRF" Member
 
Join Date: Jun 2017
Location: india
Posts: 1
Wow, that is some great info. I think the fact that it was written 10 years a go, makes even cooler!

Anyway, my question is towards the late 60s models. I recently saw a GMT that the color in the markers had a bit of white in one of the markers. Is this normal??

This is marked as just Swiss, and is an "exclamation point" dial.
Raakhi is offline   Reply With Quote
Old 13 July 2017, 08:21 AM   #29
Phat4
"TRF" Member
 
Join Date: Nov 2016
Location: Twickenham
Watch: GMT 1675
Posts: 33
Tritium

Thanks for the reminder. Read up on this a while back and forgot that I forgot. Ive been buying newer models so that info was shelved but I agree its important to remember (at least some of it), so I'll work on my memory. Thanks for taking the time to post that.
Phat4 is offline   Reply With Quote
Old 24 October 2017, 12:33 AM   #30
Hyoulden
"TRF" Member
 
Join Date: Sep 2017
Location: Burlingame CA
Posts: 17
Thank you, very helpful info as I am just getting into my Rolex History
Hyoulden is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Takuya Watches

Bobs Watches

Asset Appeal

My Watch LLC

OCWatches

DavidSW Watches

Coronet


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.