dome and superdome

[seattleal]

Originally Posted by 1665fan

No matter how high they stick up the t39 is always more domed from the sideview and the t39 slightly acts a magnifying glass and makes the lume plots larger from the top view...

Here are two more shots of the PCG 5512. Another from the side and one from above. Doesn't appear to be any distortion or magnification.

[05carbondrz]

Originally Posted by roh123

Most t19’s in the market the last few years are aftermarket as well. Something to consider while you argue.

Couple in this Thread I think.

[Onewatchguy82]

My grandpa's

[Rolexator]

Originally Posted by eton97

All the inserts are the same. I KNOW I KNOW.
Just some inserts sit differently in the bezel AND CAN CHANGE THE LOOK OF THE PLEXI HEIGHT



Sent from my iPhone using Tapatalk

Originally, the old inserts should go higher towards the plexi than the newer service ones, making them more attractive in my opinion because they are masking more of the straight sides of the plexi.

Unfortunately many of those old inserts have been flatten out a bit to better fit into the bezel ring.
So in case you should be looking for an old insert, make sure that it has not been flatten out too much.

[eton97]

Originally Posted by Rolexator

Originally, the old inserts should go higher towards the plexi than the newer service ones, making them more attractive in my opinion because they are masking more of the straight sides of the plexi.



Unfortunately many of those old inserts have been flatten out a bit to better fit into the bezel ring.

So in case you should be looking for an old insert, make sure that it has not been flatten out too much.

At last! somebody who understands what I was trying to say.
Exactly as I was pointing out....The insert on my drsd slopes up vs the insert on my 5513 that is flat


Sent from my iPhone using Tapatalk

[Onewatchguy82]

was the dome a rare thing ? or on all the subs ? and when did it stop?

[Onewatchguy82]

??

[swish77]

Originally Posted by Onewatchguy82

does anyone have pics of their subs with dome and superdome ?
and were the lugs ever thick on the 5512

Here's my 5512 with original dome and what I believe is an unpolished case. And, yes, the lugs were thick on the 5512, unless they were polished, of course.

[Onewatchguy82]

Originally Posted by swish77

Here's my 5512 with original dome and what I believe is an unpolished case. And, yes, the lugs were thick on the 5512, unless they were polished, of course.

thank you
this looks just like my grandpas
thick lugs and dome

[linesiders]

Originally Posted by seattleal

Here are two more shots of the PCG 5512. Another from the side and one from above. Doesn't appear to be any distortion or magnification.

Well, your plots are oval, not round. Hence distortion ; )

Beautiful piece

[Onewatchguy82]

My grandpa's