ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
19 March 2012, 08:23 AM | #1 |
Banned
Join Date: Jan 2012
Location: Florida
Posts: 39
|
Help: Burn-like mark on bracelet from polishing? See Pic
Hello. My GMT II was recently polished by a local watchmaker. I have noticed that under certain angles one of the center polished links has a "cloudy, smokey like" stain.
The pic below is he best I could do to show it. Could this happen from polishing? How do I fix it? Thanks |
19 March 2012, 08:29 AM | #2 |
2024 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,870
|
It was over buffed, leaving the wheel in the same spot for too long. Have them repolish.
|
19 March 2012, 08:32 AM | #3 |
Banned
Join Date: Jan 2012
Location: Florida
Posts: 39
|
|
19 March 2012, 08:33 AM | #4 |
"TRF" Member
Join Date: Jul 2011
Real Name: Gunter
Location: AL/NJ
Watch: DSSD; 116610LN
Posts: 5,509
|
Incorrect polish. I would take it somewhere else. It wasn't moved around enough and that spot must've really heated up. I have no idea how to have it fixed though. Have you tried scrubbing it? Maybe the cape Cod might work.
|
19 March 2012, 08:43 AM | #5 |
"TRF" Member
Join Date: Jan 2008
Location: Everywhere
Posts: 1,434
|
I would try with Simichrome, it should work in seconds !
Ciao Engi |
19 March 2012, 08:46 AM | #6 |
"TRF" Member
Join Date: Feb 2011
Location: US
Watch: Sub
Posts: 3,175
|
If the metal has "changed color" due to over-heating...it might be quite difficult to correct and could possibly be more than just a surface effect. Depends on a lot of factors.
Hopefully you can get it corrected quickly/easily. Good luck.
__________________
侘 寂 -- wabi-sabi -- acceptance of transience and imperfection by finding beauty in that which is imperfect, impermanent, and incomplete Commissioner of WEIRD POLICE , Badge # ecsub44 |
19 March 2012, 08:47 AM | #7 | |
"TRF" Member
Join Date: Oct 2009
Real Name: Marc
Location: SoCal
Watch: Not enough ;-)
Posts: 21,232
|
Quote:
Don't know if they can really remove it . . . Just go back and show it to them ! You paid for a good job ! Good luck |
|
19 March 2012, 08:52 AM | #8 |
2024 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,870
|
|
19 March 2012, 09:06 AM | #9 |
"TRF" Member
Join Date: Sep 2011
Location: Canada
Posts: 6,773
|
Have it polished by someone who knows what they`re doing.
|
19 March 2012, 11:45 AM | #10 |
"TRF" Member
Join Date: Apr 2008
Real Name: Brian
Location: Hamilton, MI USA
Watch: My beloved TT DJ
Posts: 3,831
|
That would make me crazy.
__________________
My Trusty TT DJ |
19 March 2012, 12:00 PM | #11 |
"TRF" Member
Join Date: Mar 2011
Location: Nj
Watch: 116200, 116610
Posts: 1,191
|
Call me stupid but I hear or read that polishing is no good.. Why polish a watch that is not 5 years old yet? I am new to the watch thing so what is your take on polishing watches.. I read that polishing can actully devalue a watch a little.. Is this correct?
|
19 March 2012, 12:01 PM | #12 |
"TRF" Member
Join Date: Apr 2009
Real Name: Clark
Location: Ramsey Minnesota
Watch: GMT Master II
Posts: 953
|
No way you'll be able to live with that!!!So just send it to me!!!
__________________
GMT Master II 126300 41 White stick smooth Explorer 39mm SOLD ,, 114060 SOLD NIB Sub ND SOLD,,Shouldn't have!!!Crap! |
19 March 2012, 12:30 PM | #13 |
"TRF" Member
Join Date: May 2008
Location: Earth
Posts: 1,694
|
dont polish your watches, leave them og, original gangstar, i mean original
__________________
PP Geneva |
19 March 2012, 12:34 PM | #14 |
"TRF" Member
Join Date: Aug 2008
Real Name: Eric
Location: Hong Kong
Watch: 1665
Posts: 1,495
|
__________________
_____________ All GREEN |
19 March 2012, 01:06 PM | #15 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: New Mexico
Watch: 116710 BLNR
Posts: 34,345
|
That's pathetic.
I'd want my money back and the price of having it fixed by someone else, preferably Rolex.
__________________
JJ Inaugural TRF $50 Watch Challenge Winner |
19 March 2012, 01:06 PM | #16 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Sep 2008
Location: New Mexico
Watch: 116710 BLNR
Posts: 34,345
|
That's pathetic.
I'd want my money back and the price of having it fixed by someone else, preferably Rolex.
__________________
JJ Inaugural TRF $50 Watch Challenge Winner |
19 March 2012, 05:41 PM | #17 |
"TRF" Member
Join Date: Sep 2008
Real Name: Brett
Location: Bahrain, Dubai
Watch: Rolex and AP
Posts: 5,538
|
Very poor job on the polish...I would take it back to show them the 'damage', have a
Rolex AD or RSC do the work, then give the bill to your local watchmaker.....this is one of the many reasons I don't polish my watches...ever....not even during service. Good luck mate! |
19 March 2012, 06:00 PM | #18 |
"TRF" Member
Join Date: Mar 2012
Location: Isabella8688
Posts: 1
|
|
19 March 2012, 06:09 PM | #19 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,792
|
If that has been caused by heat then the colour will be very deep.
New parts might be needed at your local watchmakers cost IMO. I doubt if polishing will remove it completely.
__________________
E |
19 March 2012, 06:32 PM | #20 |
2024 Pledge Member
Join Date: Aug 2009
Real Name: Travis
Location: FL / NYC
Watch: Yes..
Posts: 32,192
|
That would bother me.
Hopefully can be a quick fix.
I might try a different watchmaker. Let us know... |
19 March 2012, 07:08 PM | #21 |
Member
Join Date: Aug 2008
Real Name: Christophe
Location: Belgium
Watch: The 1 on my wrist.
Posts: 68
|
I think I can help here...
From time to time I repolish parts of my watches carefully.
However, I recently had a similar mark on the side of one of my watches, although less pronounced. The reason was the rotating felt that is engorged with blackened polishing powder. It tends to leave a brownish colouring on the microscopic pores of the metal. I simply took a piece of Brasso copper-cleaning cotton and rubbed it with my thumb. Within seconds it was all gone and good as new. This type of steel would really need extremely high temperatures to start discolouring. I'm not saying this is not the case. (I hope not!) But I think the Brasso could help you presto. Good luck! |
19 March 2012, 07:15 PM | #22 |
2024 ROLEX DATEJUST41 Pledge Member
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 36,792
|
I hope you are correct.
__________________
E |
19 March 2012, 07:21 PM | #23 |
Member
Join Date: Aug 2008
Real Name: Christophe
Location: Belgium
Watch: The 1 on my wrist.
Posts: 68
|
Hopefully...
Yes I hope so too, because if it really is heat-discolouring, the only way to remove it would be to re-melt the steel.
Anyway, it worked for me. I was really bothered with that brown streak and walked around with it for a couple of weeks before thinking of the Brasso. Sometimes one gets lucky... |
19 March 2012, 08:21 PM | #24 |
"TRF" Member
Join Date: Jul 2010
Real Name: tom
Location: northern ireland
Watch: my fins
Posts: 10,063
|
i find heat colour only effects the surface where the oxygen is present , quick rub of duraglit would sort it out , and never return to the guy who did it in the first place..
|
20 March 2012, 01:13 AM | #25 |
"TRF" Member
Join Date: Nov 2007
Real Name: Jon
Location: Chicago
Watch: IIc,DJII,P244,A1-Z
Posts: 2,857
|
Did they polish a groove into it too?
|
20 March 2012, 01:16 AM | #26 |
"TRF" Member
Join Date: Apr 2010
Real Name: J
Location: The great Midwest
Watch: youlookinat?
Posts: 2,369
|
Ive found that this is from not refreshing your rouge. In other words, not applying new rouge/dressing the wheel often enough while polishing. It's usually corrected with a quick rebuff and is not serious. It should have been caught before it was handed to you but poor lighting can allow such slip-ups.
|
20 March 2012, 01:58 AM | #27 |
"TRF" Member
Join Date: Nov 2009
Location: netherlands
Posts: 2,177
|
Let us know how this plays out..
__________________
116718LN Black dial |
20 March 2012, 02:07 AM | #28 |
Banned
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
|
Boy, you guys are tough for a Monday.
Anyone can make a mistake and a watchmaker that works on a bunch of watches each week can make a mistake like anyone else. It should not be grounds for termination I would bring it to their attention and see how they fix the issue. In my opinion, customer service or fixing an issue is what seperates someone I would do business with and someone I would not We all make mistakes, it's how they are fixed that matters |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.