ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

bp1000 · 8 October 2020, 03:26 AM

Anyone know where to buy the equivalent of this in the uk ?

https://www.esslinger.com/horofix-sc...tips-included/

I could do with a hollow 1.7 and 1.3 to work on oyster and jubilee

Thanks!

woodruffm · 8 October 2020, 03:37 AM

I picked up the equivalent from amazon last week after baulking at the delivery charges from esslinger , it came via Germany. I can't post links but search for rolex 2100 screwdriver in amazon and you should see a gold coloured equivalent, it works like a charm.

Sent from my SM-G960F using Tapatalk

Tools · 8 October 2020, 04:56 AM

You might try Cousinsuk.com for watch parts and tools in the uk

bp1000 · 8 October 2020, 05:55 AM

Thank you guys appreciated - I’ll take a look at both suggestions

Daveclock · 8 October 2020, 06:00 AM

I can second the Cousins site.
I bought the Horotec, Parallel 1.5mm blade from them for my screwdriver £3.10
Note I said 1.5mm as wanted it for EXP-II bracelet etc.,
I also bought the correct Loctite for screws
(there is a looooonng thread on here that goes into it...)

bp1000 · 9 October 2020, 12:14 AM

Cousins done the Job - thanks again

Ordering a horotec in 1.8mm for my speedmasters and additional blades, 1.6 and 1.3 for oyster and old jubilee.

Got to admit, need to dig a little deeper to find this stuff. I know a screw is a screw but supply of these "accepted" drivers is fairly thin and limited to just a few sellers in the uK.

Russell996 · 9 October 2020, 12:52 AM

H S Walsh also in the UK

https://www.hswalsh.com

london_v · 21 September 2021, 09:09 PM

Sorry to resurrect an old thread. Struggling to find a suitable UK screwdriver to resize my 124270 Explorer. Any recommendations as I appreciate this thread is quite old.

77T · 21 September 2021, 09:16 PM

The reco’s in the thread are still viable despite being almost 1 year old.

For example:

https://www.hswalsh.com/search-produ...ms_per_page=24

Sent from my iPhone using Tapatalk Pro

8 October 2020, 03:26 AM	#1
bp1000 "TRF" Member Join Date: Jul 2014 Location: Midlands, UK Posts: 4,698	Screwdriver UK/Europe Anyone know where to buy the equivalent of this in the uk ? https://www.esslinger.com/horofix-sc...tips-included/ I could do with a hollow 1.7 and 1.3 to work on oyster and jubilee Thanks!

8 October 2020, 04:56 AM	#3
Tools TRF Moderator & 2024 DATE-JUST41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,044	You might try Cousinsuk.com for watch parts and tools in the uk __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

21 September 2021, 09:16 PM	#9
77T 2024 ROLEX DATEJUST41 Pledge Member Join Date: Dec 2010 Real Name: PaulG Location: Georgia Posts: 40,714	Screwdriver UK/Europe The reco’s in the thread are still viable despite being almost 1 year old. For example: https://www.hswalsh.com/search-produ...ms_per_page=24 Sent from my iPhone using Tapatalk Pro __________________ Does anyone really know what time it is?

8 October 2020, 03:37 AM	#2
woodruffm "TRF" Member Join Date: Jun 2017 Location: Surrey, UK Watch: 116600 Posts: 51	I picked up the equivalent from amazon last week after baulking at the delivery charges from esslinger , it came via Germany. I can't post links but search for rolex 2100 screwdriver in amazon and you should see a gold coloured equivalent, it works like a charm. Sent from my SM-G960F using Tapatalk

8 October 2020, 05:55 AM	#4
bp1000 "TRF" Member Join Date: Jul 2014 Location: Midlands, UK Posts: 4,698	Thank you guys appreciated - I’ll take a look at both suggestions

8 October 2020, 06:00 AM	#5
Daveclock "TRF" Member Join Date: Dec 2018 Real Name: Dave Location: UK Watch: ing and waiting! Posts: 864	I can second the Cousins site. I bought the Horotec, Parallel 1.5mm blade from them for my screwdriver £3.10 Note I said 1.5mm as wanted it for EXP-II bracelet etc., I also bought the correct Loctite for screws (there is a looooonng thread on here that goes into it...)

9 October 2020, 12:14 AM	#6
bp1000 "TRF" Member Join Date: Jul 2014 Location: Midlands, UK Posts: 4,698	Cousins done the Job - thanks again Ordering a horotec in 1.8mm for my speedmasters and additional blades, 1.6 and 1.3 for oyster and old jubilee. Got to admit, need to dig a little deeper to find this stuff. I know a screw is a screw but supply of these "accepted" drivers is fairly thin and limited to just a few sellers in the uK.

9 October 2020, 12:52 AM	#7
Russell996 2024 Pledge Member Join Date: May 2016 Location: UK Posts: 4,180	H S Walsh also in the UK https://www.hswalsh.com

21 September 2021, 09:09 PM	#8
london_v "TRF" Member Join Date: Apr 2015 Location: London Watch: 124060 Posts: 295	Sorry to resurrect an old thread. Struggling to find a suitable UK screwdriver to resize my 124270 Explorer. Any recommendations as I appreciate this thread is quite old.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)