ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
8 November 2024, 02:57 AM | #1 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
5513 Very best case restoration regardless of price USA
I'm thinking about restoring the case on my late ‘60s 5513 Submariner to its original factory specs. Since I plan on keeping this watch for the long haul, I figure it’s worth pampering it and bringing it back as close as possible to how it looked when it left Rolex over 50 years ago. The case has seen a lot of polishing over the decades, so I know laser welding will be necessary to bring it back to life.
I’m looking for the top specialist in the U.S. for this kind of restoration, and I’m open to recommendations, regardless of cost. - Does anyone with vintage expertise have advice on where I should send this work? - While price isn't my main concern, what would be a reasonable ballpark range for this kind of restoration? Thanks
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
8 November 2024, 03:11 AM | #2 |
2024 SubLV41 Pledge Member
Join Date: Jan 2019
Location: Valencia, CA
Watch: GMT Master 1675/3
Posts: 2,187
|
Zimmerman Watch Repair, Los Angeles Watch Works (LAWW), and Rolliworks. That's all I got, and I believe in the right order from when I was looking to do the same. Definitely post several before pics and some after pics. Would love to see the results once you make a decision. Cost is dependent on how much work needs to be done, but an estimate for mine (GMT 1675) from LAWW at one point (2020) was about $750 and that was without laser welding, which I still do think it does need a bit to build up the cratering around the lug holes prior to refinishing.
|
8 November 2024, 04:14 AM | #3 |
2024 Pledge Member
Join Date: Apr 2019
Location: 33139/95460
Posts: 1,410
|
As you are right here in Miami, imo it makes sense to take it in to Rolliworks in person and go over it face to face.
|
8 November 2024, 04:15 AM | #4 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,273
|
I have used LAWW and Rolliworks. Both are all right, but a bit inconsistent. Really depends what you are hoping to achieve. Your case will certainly be improved assuming that it is over polished, but you probably shouldn't expect it to look like it did originally.
My understanding is that Zimmerman charges roughly 2x as much, and I've also heard mixed reviews, but that is hearsay.
__________________
@oldwatchdan on IG |
8 November 2024, 05:22 AM | #5 |
"TRF" Member
Join Date: Feb 2023
Real Name: Dom
Location: United Kingdom
Watch: SD16600 & 9411
Posts: 472
|
I'd be fascinated in a restoration update, if/when you get it done, I'd be interested in lug welding, building them back up (a bit) and getting an accurate ball park estimate appears difficult!
__________________
Rolex 16610, 16600, 2 x Tudor 9411/0 black, 2 x blue and a black 79090 |
8 November 2024, 05:40 AM | #6 | |
"TRF" Member
Join Date: Apr 2017
Location: United States
Posts: 203
|
Quote:
I urge anyone who is interested in getting work done to contact ZWR, Rolliworks, and/or LAWW and get a quote. Examples of work done can be found on their respective websites / Instagram page, as well as some photos here and WUS. |
|
8 November 2024, 06:22 AM | #7 |
2024 Pledge Member
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,459
|
Can you post some pictures that aren’t just head-on? I ask because I had laser welding done on a watch where the work needed was only really seen from a side view of the lugs…specifically the ends of them. I used Rolliworks, and am, by and large, happy with the results. Sadly, it was during early Covid days, AND right after the moved to Miami. As a result, they had the watch for….18 months. I’ll dig up the work order and bill.
__________________
|
8 November 2024, 10:07 AM | #8 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,273
|
Good advice.
__________________
@oldwatchdan on IG |
8 November 2024, 10:08 AM | #9 |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 41,962
|
I know you didn't ask the question that I'm suggesting...
I would keep that Sub the way it is unless there is damage I can't see in the photos. But that's just me. Looks like an honest amount of wear gained in its lifetime. Sure, it hasn't got the sharpness it had when born but neither do we... Sent from my iPhone using Tapatalk Pro
__________________
Does anyone really know what time it is? |
8 November 2024, 12:19 PM | #10 |
2024 Pledge Member
Join Date: Apr 2010
Real Name: Jim
Location: Lone Star State
Watch: ...this!
Posts: 216
|
I have a 5513 at Rolliworks as I type this. The case has been there for a while now. They have also done some bracelet work for me before, and the finished work was awesome. Looking forward in seeing the case back soon.
__________________
114060, 116010lv, 126710BLRO, 126610, 116600, 4x5513, 4x1675, 2x16610, 2x1680, 16610LV, 16710, 116500, 124300, 16803, 5512, 114300, 126618, 2x6536/1, 6205, 18038, 16570, 1665, 126333, 126603 |
8 November 2024, 12:47 PM | #11 | |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Quote:
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
|
8 November 2024, 12:53 PM | #12 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
I know that Rolliworks is my closest option geographically, however, I can’t erase from my memory a thread I read on here in which the OP had issues with them and others who chimed in stated that sometimes the chamfering is too pronounced (when compared to OEM) or the crown guards were built back up with laser weld wrongly. Again, it could have been a one-off issue and not indicative of their usual workmanship. That’s why I am asking here to be honest. I would prefer to ship anywhere instead of getting under par work geographically closer if that makes sense?
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
8 November 2024, 12:54 PM | #13 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Why would they have it a while? Did they not provide a reasonable timeframe to carry out the restoration? Again, these are comments I appreciate but do worry me.
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
8 November 2024, 01:12 PM | #14 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,273
|
If this is going to bother you, don't send your watch anywhere. In my experience, you really can't count on anyone sticking with their estimated timelines. Sometimes yes, sometimes no.
__________________
@oldwatchdan on IG |
8 November 2024, 04:30 PM | #15 |
"TRF" Member
Join Date: Apr 2017
Location: United States
Posts: 203
|
ZWR laser welded my 114270 Explorer case this year. The turnaround was 2 months exactly and communication was excellent. I thought their pricing was reasonable and it was cheaper than what was quoted by Rolliworks. I did not get a quote from LAWW as I prefer to not deal with California businesses whenever possible (nothing against LAWW personally).
|
8 November 2024, 05:15 PM | #16 |
2024 Pledge Member
Join Date: Jan 2014
Location: london
Posts: 6,151
|
Have you considered upgrading? For example Jacek is selling a lovely 5513 (at quick glance) with a great looking case.
__________________
@imrootbeer7 |
8 November 2024, 09:00 PM | #17 | |
2024 SubLV41 Pledge Member
Join Date: Dec 2011
Location: RedSox Nation
Watch: U Talkn Bout Wilis
Posts: 5,502
|
Quote:
BEAT LA
__________________
I'm a sailor peg. And I've lost my leg. Climbing up the top sails. I've lost my leg! |
|
8 November 2024, 10:30 PM | #18 |
2024 SubLV41 Pledge Member
Join Date: Nov 2010
Location: North Carolina
Watch: Rolex/Others
Posts: 47,685
|
I would either keep it the way that it is or trade it for a better example. There are too many things that can go wrong and at best what are you hoping for? A newer looking watch? By the time you get this work done the money maybe close to getting the better example. Good luck and let us know what you decide.
|
8 November 2024, 10:47 PM | #19 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,273
|
If that's the one I'm looking at, the case has clearly been refinished, as with most of his watches these days. That's not a problem for the OP, obviously, but I don't see a big advantage in buying a watch with a refinished case over having his own case refinished, since he clearly like his watch overall.
__________________
@oldwatchdan on IG |
8 November 2024, 11:38 PM | #20 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Where can I see that pls?
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
8 November 2024, 11:44 PM | #21 | |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Quote:
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
|
8 November 2024, 11:45 PM | #22 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Thanks to everyone so far. All your responses are immensely helpful as I navigate this decision
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
8 November 2024, 11:46 PM | #23 |
2024 Pledge Member
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,459
|
__________________
|
9 November 2024, 12:05 AM | #24 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,273
|
As suggested above, I would urge you to contact the various shops and put these questions to them directly.
__________________
@oldwatchdan on IG |
9 November 2024, 07:37 AM | #25 |
2024 SubLV41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,661
|
I worked with Zimmerman on a 5512. Great experience.
Sent from my iPad using Tapatalk |
9 November 2024, 08:12 AM | #26 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
That does look excellent. May I ask if they rebuilt the lugs and crown guards or just lugs? Are you willing to share a ballpark figure for cost? I like the results.
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
9 November 2024, 10:05 AM | #27 |
2024 SubLV41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,661
|
Both lugs and crown guards to get to original spec. Shared some photos and Zimmerman also has a library of models and measurements.
I can’t recall the total price, but it was not much more than an RSC Service, all in. All my other watches are unpolished, and it was cool to see this one get new life. |
9 November 2024, 11:15 AM | #28 |
Facilitator
Join Date: Nov 2005
Real Name: Steve
Location: Omnipresent
Posts: 33,569
|
Wow that is a great result on that 5512.
So laser welding can restore crown guards, I didn't know that.
__________________
Most folks are about as happy as they make up their minds to be. ~Abraham Lincoln Nothing compares to the simple pleasure of a bike ride. ~John F. Kennedy ROLEXploitation - yeah I'm a victim |
10 November 2024, 01:08 AM | #29 | |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,895
|
Quote:
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
|
10 November 2024, 01:13 AM | #30 |
2024 SubLV41 Pledge Member
Join Date: Dec 2013
Location: UTC/GMT -5
Posts: 3,661
|
|
Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
flyinghell34 |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.