How much time before my thread is posted?

[Alcibiade]

Dear administrator,

I've posted a thread some hours ago about a vintage lady's Rolex, but I haven't seen it yet.

Maybe I've done an error or something wrong?

Thank you.

[MonBK]

Originally Posted by Alcibiade

Dear administrator,

I've posted a thread some hours ago about a vintage lady's Rolex, but I haven't seen it yet.

Maybe I've done an error or something wrong?

Thank you.

It's here.

http://www.rolexforums.com/showthrea...90#post7097890

[sleddog]

Your posts are being held for moderator approval as you are a new member with no real history...
The thread you question has been deemed not fit, and will not be posted. You are asking for values, and also stating you want to sell. TRF is not a shopping service, and is not to be used to as a gateway to sell without going through the correct channels. I suggest you take some time to read the rules of this site before continuing...

[Alcibiade]

Originally Posted by sleddog

Your posts are being held for moderator approval as you are a new member with no real history...
The thread you question has been deemed not fit, and will not be posted. You are asking for values, and also stating you want to sell. TRF is not a shopping service, and is not to be used to as a gateway to sell without going through the correct channels. I suggest you take some time to read the rules of this site before continuing...

My first purpose was to identify the watch, but ok, I'll respect your rules.

[77T]

Originally Posted by Alcibiade

My first purpose was to identify the watch, but ok, I'll respect your rules.

If I may offer some advice - a quick review of the rules is the best thing to do first.

Then create a new post in the Rolex Vintage section in the forum with your questions about the watch including good sharp pictures.

As long as you are asking to identify the watch you should be OK. Then you can go into eBay and use the information you learn to get approximate values.


Sent from my iPhone using Tapatalk

[Alcibiade]

Originally Posted by 77T

If I may offer some advice - a quick review of the rules is the best thing to do first.

Then create a new post in the Rolex Vintage section in the forum with your questions about the watch including good sharp pictures.

As long as you are asking to identify the watch you should be OK. Then you can go into eBay and use the information you learn to get approximate values.


Sent from my iPhone using Tapatalk

Thank you!

[drefhill]

I've published 2 treads and none is showing, got no notification from moderators.

[MonBK]

Originally Posted by drefhill

I've published 2 treads and none is showing, got no notification from moderators.

Did you read post #3 ?

[drefhill]

Originally Posted by MonBK

Did you read post #3 ?

Yes i've read the rules and i dont see what's wrong, i've spent a lot of time to make those 2 treads with plenty of photos that i've had to upload one by one on an independent image website.

[MonBK]

Originally Posted by drefhill

Yes i've read the rules and i dont see what's wrong, i've spent a lot of time to make those 2 treads with plenty of photos that i've had to upload one by one on an independent image website.

I didn't say the rules but post #3 where Rob explained why it sometimes takes a bit for a thread to appear.

HERE YOU GO: "Your posts are being held for moderator approval as you are a new member with no real history"...

[77T]

The threads are showing up now -

[drefhill]

Originally Posted by 77T

The threads are showing up now -

Had to wait a few hours.