ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

stat · 4 January 2010, 05:01 PM

Was reading through the various posts today and I noticed a thread saying they received a black screw inside the hollow end of the screw driver that comes with the Sea Dweller. I went to go check and mine is empty. Did they stop putting these screws inside the Sea Dweller tools or am I actually missing this piece? Mine is a V series. Thanks in advance all!!

JJ Irani · 4 January 2010, 06:57 PM

Quote:

Originally Posted by stat

Was reading through the various posts today and I noticed a thread saying they received a black screw inside the hollow end of the screw driver that comes with the Sea Dweller. I went to go check and mine is empty. Did they stop putting these screws inside the Sea Dweller tools or am I actually missing this piece? Mine is a V series. Thanks in advance all!!

You should have received the black screw inside the screwdriver. You need to first take the cap off the pointy end of the screwdriver and then take off the pointy end which comes off the hollow end of the screwdriver - inside you will find the black screw.

It's a screw which you will probably NEVER use, but it's meant to attach the extra link marked "L" onto the bracelet to give an extra large expansion if you ever wish to wear the watch on the outside of a very thick diving suit.

JJ

zak98 · 4 January 2010, 10:33 PM

cool info!! never knew this! thanks jj!

sheldonsmith · 4 January 2010, 11:35 PM

Yep, should look like this...

-Sheldon

stat · 5 January 2010, 01:21 AM

Quote:

Originally Posted by JJ Irani

You should have received the black screw inside the screwdriver. You need to first take the cap off the pointy end of the screwdriver and then take off the pointy end which comes off the hollow end of the screwdriver - inside you will find the black screw.

It's a screw which you will probably NEVER use, but it's meant to attach the extra link marked "L" onto the bracelet to give an extra large expansion if you ever wish to wear the watch on the outside of a very thick diving suit.

JJ

Thanks JJ! I think that extra link marked "L" already has a black screw in it. Am I supposed to get another one in the tool?

R1@160@alltimes · 5 January 2010, 01:23 AM

Quote:

Originally Posted by zak98

cool info!! never knew this! thanks jj!

x2

stat · 5 January 2010, 02:51 AM

Quote:

Originally Posted by sheldonsmith

Yep, should look like this...

-Sheldon

Did anyone with a V series Sea Dweller get this extra black screw in the hollow end of the screw driver tool? Thanks again guys!

JJ Irani · 5 January 2010, 02:55 AM

Quote:

Originally Posted by stat

Did anyone with a V series Sea Dweller get this extra black screw in the hollow end of the screw driver tool? Thanks again guys!

Should be there - it's all part and parcel of the tool kit that comes FREE with the SD.

JJ

DSJ · 5 January 2010, 02:58 AM

Quote:

Originally Posted by JJ Irani

Should be there - it's all part and parcel of the tool kit that comes FREE with the SD.

JJ

Nothing from Rolex is FREE, but included as part of the complete watch!

stat · 5 January 2010, 03:03 AM

Quote:

Originally Posted by JJ Irani

Should be there - it's all part and parcel of the tool kit that comes FREE with the SD.

JJ

I thought maybe this is something they stopped including. I'll ask my AD.

stat · 5 January 2010, 09:38 AM

Quote:

Originally Posted by JJ Irani

Should be there - it's all part and parcel of the tool kit that comes FREE with the SD.

JJ

JJ - Is the screw an extra screw? I checked the "L" link and it has a similar looking black screw installed already? Thanks again!

JJ Irani · 5 January 2010, 09:41 AM

Quote:

Originally Posted by stat

JJ - Is the screw an extra screw? I checked the "L" link and it has a similar looking black screw installed already? Thanks again!

Hmmmm................not sure. Maybe it's the same black screw; but it should not have been installed inside the link. Perhaps you could check with your AD.

JJ

Wildwing · 5 January 2010, 12:29 PM

Quote:

Originally Posted by stat

Did anyone with a V series Sea Dweller get this extra black screw in the hollow end of the screw driver tool? Thanks again guys!

Yes, mine's a V series Seadweller, and the tool has the small black screw inside the tool.

stat · 5 January 2010, 03:20 PM

Quote:

Originally Posted by Wildwing

Yes, mine's a V series Seadweller, and the tool has the small black screw inside the tool.

Thanks for the info. I'll ask my AD about it. Did you also have a similar black screw already installed on the "L" link diver's extension? Thanks again!

gelshocker · 5 January 2010, 04:55 PM

Thanks for sharing!

gardoggie · 6 January 2010, 02:37 PM

I want a BNIB V-Series Sea Dweller, but alas, there don't appear to be any AD's with any left.

4 January 2010, 05:01 PM	#1
stat "TRF" Member Join Date: Dec 2009 Location: USA Posts: 148	Sea Dweller Tool - Black Screw? Was reading through the various posts today and I noticed a thread saying they received a black screw inside the hollow end of the screw driver that comes with the Sea Dweller. I went to go check and mine is empty. Did they stop putting these screws inside the Sea Dweller tools or am I actually missing this piece? Mine is a V series. Thanks in advance all!!

4 January 2010, 10:33 PM	#3
zak98 "TRF" Member Join Date: Oct 2007 Location: TN Watch: Rolex Posts: 2,166	cool info!! never knew this! thanks jj! __________________ Z- Submariner; P- Airking; R- DateJust; M- GMTII; C0 - Milgauss GV Breitling SuperOcean Heritage 46 Omega Speedmaster Racing Panerai PAM390

4 January 2010, 11:35 PM	#4
sheldonsmith 2024 Pledge Member Join Date: Nov 2005 Location: Member 202♛ Posts: 1,811	Yep, should look like this... -Sheldon __________________

6 January 2010, 02:37 PM	#16
gardoggie "TRF" Member Join Date: Dec 2009 Real Name: John Location: New Mexico Watch: Sea-Dweller Posts: 26	I want a BNIB V-Series Sea Dweller, but alas, there don't appear to be any AD's with any left. __________________ John

5 January 2010, 04:55 PM	#15
gelshocker Member Join Date: May 2009 Location: Hong Kong Posts: 318	Thanks for sharing!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)